Midiator MS-124w w/ALSA0.9.0beta12
Subject: Midiator MS-124w w/ALSA0.9.0beta12
Date: Sat, 2 Mar 2002 10:33:30 -0500
From: Darwin Marcus Johnson <[email protected]>
To: [email protected]
Cc: [email protected]
Hi All,
I am trying to get my Midiator Midi interface working with ALSA0.9.0beta 12.
I am trying to insert the snd-serial-u16550 module. My /etc/modules.conf seems to have the right options for this card.
Does anyone have a Midiator Midi interface working with the ALSA support?
Does anyone have another serial interface working with the snd-serial-u16550 module?
Can anyone point me to any documentation on setting up the modules beside the 1 page in the ALSA-HOWTO that contain this info below?
Does any of this info below have some obvious over sights, mistakes, omissions?
-Thanks
Darwin
From the ALSA-HOWTO:
----snip------------------------snd_port - port # for UART16550A chipsnd_irq - IRQ # for UART16550A chip, -1 = poll modesnd_divisor - divisor to calculate bit rate
115200bps / # - 3 = 38.4kbpsdefault
snd_ports - number of MIDI ports 1,2,3,4 - 1 = default
----snip-----------------------
# modprobe snd-serial-u16550
I get these error messages:
----snip-----------------------
Note: /etc/modules.conf is more recent than /lib/modules/2.4.18-rc1/modules.dep /lib/modules/2.4.18-rc1/kernel/driver/sound/snd-serial-u16550.o: init_module:
No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.18-rc1/kernel/driver/sound/snd-serial-u16550.o: insmod /lib/modules/2.4.18-rc1/kernel/driver/sound/snd-serial-u16550.o failed /lib/modules/2.4.18-rc1/kernel/driver/sound/snd-serial-u16550.o: insmod snd-serial-u16550 failed
----snip-------------------------
# setserial -a /dev/ttyS0
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
Baud_base: 57600, close_delay: 50, divisor: 1
closing_wait: 3000
Flags: spd_normal skip_test# cat /etc/modules.conf
----snip-------------------------
# ALSA native device support
alias char-major-116 snd
options snd snd_major=116 snd_cards_limit=2
alias snd-card-0 snd-cs46xx
alias snd-card-1 snd-serial-u16550
# snd-cs46xx Options
options snd-card cs46xx snd_index=0 snd_id="CS46XX" \
snd_dac_frame_size=128 snd_adc_frame_size=128# snd-serial-u16550 Options
options snd-serial-u16550 snd_index=1 snd_id="MidiatorMS124w" \
snd_port=0x03f8 snd_irq=4 #snd_divisor=1 snd_ports=1
----snip-------------------------------_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 45 lines · Darwin Marcus Johnson
Hi All,
I am trying to get my Midiator Midi interface working with ALSA0.9.0beta 12.
I am trying to insert the snd-serial-u16550 module. My/etc/modules.confseems to have the right options for this card.Does anyone have a Midiator Midi interface working with the ALSA support?
Does anyone have another serial interface working with the snd-serial-u16550 module?
Can anyone point me to any documentation on setting up the modules beside the 1 page in the ALSA-HOWTO that contain this info below?
Does any of this info below have some obvious over sights, mistakes, omissions?
-Thanks
DarwinQuoted 1 line
From the ALSA-HOWTO:
----snip------------------------
snd_port- port # for UART16550A chipsnd_irq- IRQ # for UART16550A chip, -1 = poll modesnd_divisor- divisor to calculate bit rate115200bps / # - 3 = 38.4kbpsdefault
snd_ports- number of MIDI ports 1,2,3,4 - 1 = default
----snip-----------------------# modprobe snd-serial-u16550I get these error messages:
----snip-----------------------
Note:/etc/modules.confis more recent than/lib/modules/2.4.18-rc1/modules.dep/lib/modules/2.4.18-rc1/kernel/driver/sound/snd-serial-u16550.o:init_module:
No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters/lib/modules/2.4.18-rc1/kernel/driver/sound/snd-serial-u16550.o: insmod/lib/modules/2.4.18-rc1/kernel/driver/sound/snd-serial-u16550.ofailed/lib/modules/2.4.18-rc1/kernel/driver/sound/snd-serial-u16550.o: insmod snd-serial-u16550 failed
----snip-------------------------
Quoted 5 lines
# setserial -a /dev/ttyS0
/dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4
Baud_base: 57600, close_delay: 50, divisor: 1
closing_wait: 3000
Flags: spd_normal skip_testYou must turn the default Linux serial driver off before trying the ALSA driver:
setserial /dev/ttyS0 uart none
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
That did it thanks!
Quoted 12 lines · Jaroslav Kysela
Quoted 5 lines · Darwin Marcus Johnson
Hi All,
I am trying to get my Midiator Midi interface working with ALSA0.9.0beta
12. I am trying to insert the snd-serial-u16550 module. My/etc/modules.confseems to have the right options for this card.You must turn the default Linux serial driver off before trying the ALSA driver:
setserial
/dev/ttyS0uart none
Quoted 7 lines
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel