mtd partitions on Sharp Zaurus
Hi,
I'm new to linux and mtd, sorry if my post is misdirected...
I have a Sharp Zaurus PDA with 16MB sharp flash rom. There's a linux mtd chip driver coolie_sharp.c written by Sharp/Lineo for this flash chip (there's two 8MB chips actually for total of 16MB in there). This PDA comes with linux 2.4.6 kernel and initrd
that has root partition mounted as cramfs. Both zImage and initrd can be flashed into the rom separately. Apparently, rom has some kind of partitioning already. There's a boot loader in the flash rom, no separate program to perform flashing.
I have source code for most of the kernel (save for couple of closed-source drivers for which I have binary KLMs). But I don't have source code or any documentation on sharp boot loader/flash program.
With the sharp stock kernel I have a couple of mtd devices, i.e.:
# cat /proc/mtd dev: size erasesize name mtd0: 01000000 00020000 "mtdrom" mtd1: 02200000 00000400 "mtdram" #
Also, I have /dev/collie-fl that I think is a flash chip device.
I've recompiled the kernel to remove cramfs and use jffs2 instead for a root partition.
But I'm in a complete dark as of how I need to partition flash rom chip and map its partions to mtd block devices. Is there any user space program exist that can enumerate and display existing partitions which are already in the flash? Is there any documentation I can read on how to partition flash?
Thanks,
-albertr
Quoted 5 lines · [email protected] said:
But I'm in a complete dark as of how I need to partition flash rom
chip and map its partions to mtd block devices. Is there any user space program exist that can enumerate and display existing partitions which are already in the flash? Is there any documentation I can read on how to partition flash?
Not really - only the source code. The current flash partitioning code is very primitive - we simple register multiple devices, each with methods which just add an offset and call into the 'real' device's methods.
I don't know how the partitions on the Zaurus work - they haven't get got round to sending me one :)
--
dwmw2
The base Zaurus uses a readonly mtd driver called mtdrom. It also partitions ram into a normal area and a mtdram area which is used for /home. /home is remounted on soft boot allowing data to be preserved.
The latest kernel releases include proper read/write mtd flash drivers but incomplete partition information imho. jffs2 will work with an alternate kernel. The OpenZaurus project is configured to use jffs2 instead of cramfs.
http://OpenZaurus.SourceForge.net/
I suggest you start with the kernel they are useing which you can build from the buildroot system in CVS:
http://sourceforge.net/cvs/?group_id=43045
The bootloader used on the Zaurus is a modified version of Angel. It uses multiple partitions as described on:
http://www.btinternet.com/~p.flinders/sl-5000d/romimage-layout.html
128k - angel
128k - cf updater
512k - diagnostics
1M - kernel
14M+128k - root filesystem
128k - partition info
It would be a fairly simple matter to convert that over to:
128k - blob (including CF updater, diagnostics, and partition table) 16M-128k - rootfs (including kernel and modules)
if the blob team had access to a zaurus with jtag, but sharp has not released this information. I suspect the pins on the back of a zaurus next to the battery include jtag pins.
Ask your Sharp reps for this feature if you are interested in fitting more data in the internal flash.
Quoted 43 lines · Albert Rybalkin
Hi,
I'm new to linux and mtd, sorry if my post is misdirected...
I have a Sharp Zaurus PDA with 16MB sharp flash rom. There's a linux mtd chip driver
coolie_sharp.cwritten by Sharp/Lineo for this flash chip (there's two 8MB chips actually for total of 16MB in there). This PDA comes with linux 2.4.6 kernel and initrd
that has root partition mounted as cramfs. Both zImage and initrd can be flashed into the rom separately. Apparently, rom has some kind of partitioning already. There's a boot loader in the flash rom, no separate program to perform flashing.I have source code for most of the kernel (save for couple of closed-source drivers for which I have binary KLMs). But I don't have source code or any documentation on sharp boot loader/flash program.
With the sharp stock kernel I have a couple of mtd devices, i.e.:
# cat /proc/mtd dev: size erasesize name mtd0: 01000000 00020000 "mtdrom" mtd1: 02200000 00000400 "mtdram" #Also, I have
/dev/collie-flthat I think is a flash chip device.I've recompiled the kernel to remove cramfs and use jffs2 instead for a root partition.
But I'm in a complete dark as of how I need to partition flash rom chip and map its partions to mtd block devices. Is there any user space program exist that can enumerate and display existing partitions which are already in the flash? Is there any documentation I can read on how to partition flash?
Thanks,
-albertr______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Signature · 3 lines
Tim Riker - http://rikers.org/ - short SIGs! <g> All I need to know I could have learned in Kindergarten ... if I'd just been paying attention.
Thanks alot to all who replied and answered my questions, I really appreciate your help.
Quoted 6 lines
The latest kernel releases include proper read/write mtd flash drivers but incomplete partition information imho. jffs2 will work with an alternate kernel. The OpenZaurus project is configured to use jffs2 instead of cramfs.
Doh. Don't know how I missed OpenZaurus, sorry... Just downloaded their
initrd and it's jffs2, indeed!
About missing partition information... Since the zaurus partition
info ("name",size, offset) is known, do you think it could be possible
to add it to some map driver? I saw your patch dated January 2002 at http://opensource.lineo.com/~timr/zaurus
but linux/drivers/mtd/maps/sa1100-flash.c v 1.7 does not seem to have any
mentioning of coolio partitions. Was it removed from kernel source or
moved along to other place?
Quoted 12 lines
The bootloader used on the Zaurus is a modified version of Angel. It uses multiple partitions as described on:
http://www.btinternet.com/~p.flinders/sl-5000d/romimage-layout.html
128k - angel
128k - cf updater
512k - diagnostics
1M - kernel
14M+128k - root filesystem
128k - partition info
Quoted 5 lines
It would be a fairly simple matter to convert that over to:
128k - blob (including CF updater, diagnostics, and partition table) 16M-128k - rootfs (including kernel and modules)
Ok, so /dev/mtdblock0 is "Angel" and /dev/mtdblock4 is initrd? If I'll make my own jffs2 version of initrd and flash it in place of Sharp's cramfs, does it mean that it could be mounted on /dev/mtdblock4 ? Or am I missing the point?
Quoted 4 lines
Ask your Sharp reps for this feature if you are interested in fitting more data in the internal flash.
It sure would be nice to get rid of small partitions and save some space. I'll ask somebody from Sharp when I get a chance. Can you please give me more details (email is ok) on what you need from sharp to make it happen?
Thanks,
-albertr