2.5.12 compile error ( e100, Alternate Intel driver )

=== compile error EtherExpressPro/100 support ( e100, Altrenate Intel driver ) ===

io_apic.c:221: warning: move' defined but not used drivers/net/net.o: In function e100_diag_config_loopback':
drivers/net/net.o(.text+0x52ff): undefined reference to `e100_phy_reset'
make: *** [vmlinux] Error 1

Quoted 7 lines

=== compile error EtherExpressPro/100 support ( e100, Altrenate Intel driver ) ===

io_apic.c:221: warning: move' defined but not used drivers/net/net.o: In function e100_diag_config_loopback':
drivers/net/net.o(.text+0x52ff): undefined reference to `e100_phy_reset'
make: *** [vmlinux] Error 1

Remove the __devexit tag from e100_phy_reset()'s definition in drivers/net/e100/e100_phy.c around line 873

I already sent Jeff a patch for this.

Signature · 2 lines

| Dave Jones.        http://www.codemonkey.org.uk
| SuSE Labs

Hi.

I compile 2.5.12 without framebuffer console and boot up fine. First I use EtherExpressPro/100 support ( e100, Altrenate Intel driver ), but compile error occured. this driver is default.
I change EtherExpressPro/100 support ( eepro100, original Becker driver ), then compile and boot up fine.

=== compile error EtherExpressPro/100 support ( e100, Altrenate Intel driver ) ===

io_apic.c:221: warning: move' defined but not used drivers/net/net.o: In function e100_diag_config_loopback':
drivers/net/net.o(.text+0x52ff): undefined reference to `e100_phy_reset'
make: *** [vmlinux] Error 1