Ensoniq ES1373
Hi,
I bought this Creative Labs Ensoniq AudioPCI card about a year ago, and couldn't get it to work
with Linux back then (ALSA or OSS/Free). I just decided to pop it in and try it out in Windows first, then Linux using the latest alsa-driver-0.9.0rc1. I AM ECSTATIC. IT WORKS! :)
Excellent work, whoever worked on the driver. I am using the snd-ens1371 module, and here's the lspci -vv readout for my card:
00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 09)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at dc00 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
This is on Linux kernel 2.4.18, BTW, on an AMD Athlon 900MHz with VIA chipset. Slackware 8.0.
My only question is, is the BASS/TREBLE mixer supported?
In Windows under the Master Volume in the "Advanced" tab there are settings for BASS/TREBLE and they do work, however in 'amixer' and 'amixer contents' I see no settings related to BASS or TREBLE boost...
TIA
_______________________________________________________________
Hundreds of nodes, one monster rendering program.
Now that's a super model! Visit http://clustering.foundries.sf.net/
At Fri, 17 May 2002 22:40:17 -0400,
Quoted 19 lines · Spirilis
Hi,
I bought this Creative Labs Ensoniq AudioPCI card about a year ago, and couldn't get it to work
with Linux back then (ALSA or OSS/Free). I just decided to pop it in and try it out in Windows first, then Linux using the latest alsa-driver-0.9.0rc1. I AM ECSTATIC. IT WORKS! :)Excellent work, whoever worked on the driver. I am using the snd-ens1371 module, and here's the lspci -vv readout for my card:
00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 09)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort+ >SERR- <PERR-
Latency: 32 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at dc00 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mAPME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Quoted 3 lines
This is on Linux kernel 2.4.18, BTW, on an AMD Athlon 900MHz with VIA chipset. Slackware 8.0.
My only question is, is the BASS/TREBLE mixer supported?
if amixer doesn't show it, then most likey the ac97 codec on your card doesn't support tone-control feature.
perhaps windows driver tunes bass/treble on software.
Takashi
_______________________________________________________________
Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm