Skip to contentSkip to conversation

strange capability problem

DISCUSSION Russell Coker 2 participants 2 messages May 23, 2002 – May 28, 2002 SELinux security module

lore
Share & tools
lore
#0 lore raw

I have attached the strace output from the radvd program.

When it is run the following error is logged:
avc: denied { sys_module } for pid=879 exe=/usr/sbin/radvd capability=16 scontext=system_u:system_r:radvd_t tcontext=system_u:system_r:radvd_t tclass=capability

However I can't work out what it does to cause that! The strace.out file contains no query_module() or create_module() call.

The machine which has this problem is not nearly ready for avc_toggle so I can't just put the machine in enforcing mode and see what stops!

Any suggestions?

For reference radvd is a route advisory daemon for IPv6, it's needs in terms of security are very similar to dhcpd.

Signature · 4 lines
If you send email to me or to a mailing list that I use which has >4 lines
of legalistic junk at the end then you are specifically authorizing me to do
whatever I wish with the message and all other messages from your domain, by
posting the message you agree that your long legalistic sig is void.

getpid() = 1411
close(255) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
rt_sigaction(SIGTSTP, {SIG_DFL}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTTIN, {SIG_DFL}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGTTOU, {SIG_DFL}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGINT, {SIG_DFL}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGQUIT, {SIG_DFL}, {SIG_IGN}, 8) = 0
rt_sigaction(SIGCHLD, {SIG_DFL}, {0x806f070, [], 0x4000000}, 8) = 0
execve("/sbin/start-stop-daemon", ["start-stop-daemon", "--oknodo", "--start", "--pidfile", "/var/run/radvd.pid", "--exec", "/usr/sbin/radvd"], [/* 20 vars */]) = 0

uname({sys="Linux", node="lyta", ...})  = 0
brk(0)                                  = 0x804c840
open("/etc/ld.so.preload", O_RDONLY)    = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=31, ...}) = 0
old_mmap(NULL, 31, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0x40014000
close(3)                                = 0
munmap(0x40014000, 31)                  = 0
open("/etc/ld.so.cache", O_RDONLY)      = 3

fstat64(3, {st_mode=S_IFREG|0644, st_size=68005, ...}) = 0 old_mmap(NULL, 68005, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40014000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\30\222"..., 1024) = 1024 fstat64(3, {st_mode=S_IFREG|0755, st_size=1153784, ...}) = 0 old_mmap(NULL, 1166560, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40025000 mprotect(0x40138000, 40160, PROT_NONE) = 0

old_mmap(0x40138000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x113000) = 0x40138000
old_mmap(0x4013e000, 15584, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4013e000
close(3)                                = 0
munmap(0x40014000, 68005)               = 0
stat64("/usr/sbin/radvd", {st_mode=S_IFREG|0755, st_size=42036, ...}) = 0
brk(0)                                  = 0x804c840
brk(0x804c9c0)                          = 0x804c9c0
brk(0x804d000)                          = 0x804d000
open("/var/run/radvd.pid", O_RDONLY)    = -1 ENOENT (No such file or directory)
execve("/usr/sbin/radvd", ["/usr/sbin/radvd"], [/* 20 vars */]) = 0
uname({sys="Linux", node="lyta", ...})  = 0
brk(0)                                  = 0x8053074
open("/etc/ld.so.preload", O_RDONLY)    = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=31, ...}) = 0
old_mmap(NULL, 31, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0x40014000
close(3)                                = 0
munmap(0x40014000, 31)                  = 0
open("/etc/ld.so.cache", O_RDONLY)      = 3

fstat64(3, {st_mode=S_IFREG|0644, st_size=68005, ...}) = 0 old_mmap(NULL, 68005, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40014000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\30\222"..., 1024) = 1024 fstat64(3, {st_mode=S_IFREG|0755, st_size=1153784, ...}) = 0 old_mmap(NULL, 1166560, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x40025000 mprotect(0x40138000, 40160, PROT_NONE) = 0

old_mmap(0x40138000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x113000) = 0x40138000
old_mmap(0x4013e000, 15584, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4013e000
close(3)                                = 0
munmap(0x40014000, 68005)               = 0
time(NULL)                              = 1022174874
brk(0)                                  = 0x8053074
brk(0x8053204)                          = 0x8053204
brk(0x8054000)                          = 0x8054000
brk(0x8057000)                          = 0x8057000
time([1022174874])                      = 1022174874
open("/etc/localtime", O_RDONLY)        = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=1074, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40014000
read(3, "TZif\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\r\0\0\0\r\0"..., 4096) = 1074
close(3)                                = 0
munmap(0x40014000, 4096)                = 0
getpid()                                = 1411

rt_sigaction(SIGPIPE, {0x400f1f28, [], 0x4000000}, {SIG_DFL}, 8) = 0
socket(PF_UNIX, SOCK_DGRAM, 0) = 3
fcntl64(3, F_SETFD, FD_CLOEXEC) = 0
connect(3, {sin_family=AF_UNIX, path="/dev/log"}, 16) = 0 send(3, "<30>May 23 19:27:54 radvd[1411]:"..., 54, 0) = 54 rt_sigaction(SIGPIPE, {SIG_DFL}, NULL, 8) = 0
socket(PF_INET6, SOCK_RAW, 58) = 4
setsockopt(4, SOL_IPV6, 2, [1], 4) = 0
setsockopt(4, SOL_RAW, 0x7 /* RAW_??? */, [2], 4) = 0

setsockopt(4, SOL_IPV6, 16, [255], 4)   = 0
setsockopt(4, SOL_IPV6, 18, [255], 4)   = 0
setsockopt(4, SOL_IPV6, 8, [1], 4)      = 0
setsockopt(4, SOL_ICMPV6, 1, [-1], 32)  = 0
open("/etc/radvd.conf", O_RDONLY)       = 5
close(5)                                = 0
socket(PF_UNIX, SOCK_STREAM, 0)         = 5

connect(5, {sin_family=AF_UNIX, path="/var/run/.nscd_socket"}, 110) = 0 write(5, "\2\0\0\0\0\0\0\0\5\0\0\0", 12) = 12
write(5, "root\0", 5) = 5
read(5, "h7\26@\1\0\0\0\5\0\0\0\2\0\0\0\0\0\0\0\0\0\0\0\5\0\0\0"..., 36) = 36 read(5, "root\0x\0root\0/root\0/bin/bash\0", 28) = 28
close(5) = 0
stat64("/etc/radvd.conf", {st_mode=S_IFREG|0644, st_size=75, ...}) = 0 _sysctl({{CTL_NET, NET_IPV6, NET_IPV6_CONF, 10, fffffffe, 1}, 5, 0xbfffea90, 4, (nil), 0}) = 0
open("/etc/radvd.conf", O_RDONLY) = 5
brk(0x805c000) = 0x805c000
ioctl(5, SNDCTL_TMR_TIMEBASE, 0xbfffe138) = -1 ENOTTY (Inappropriate ioctl for device) fstat64(5, {st_mode=S_IFREG|0644, st_size=75, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40014000
read(5, "interface eth0\n{\n AdvSendAdver"..., 8192) = 75
read(5, "", 4096) = 0
ioctl(4, 0x8913, 0xbfffe22c) = -1 ENOSYS (Function not implemented)
ioctl(4, 0x8913, 0xbfffe22c) = -1 ENOSYS (Function not implemented)

ioctl(4, 0x8913, 0xbfffe22c)            = -1 ENODEV (No such device)
time([1022174874])                      = 1022174874
getpid()                                = 1411

rt_sigaction(SIGPIPE, {0x400f1f28, [], 0x4000000}, {SIG_DFL}, 8) = 0 send(3, "<27>May 23 19:27:54 radvd[1411]:"..., 84, 0) = 84 rt_sigaction(SIGPIPE, {SIG_DFL}, NULL, 8) = 0
time([1022174874]) = 1022174874
getpid() = 1411
rt_sigaction(SIGPIPE, {0x400f1f28, [], 0x4000000}, {SIG_DFL}, 8) = 0 send(3, "<27>May 23 19:27:54 radvd[1411]:"..., 77, 0) = 77 rt_sigaction(SIGPIPE, {SIG_DFL}, NULL, 8) = 0
_exit(1) = ?

#1 lore raw
Quoted 9 lines · Russell Coker

I have attached the strace output from the radvd program.

When it is run the following error is logged:
avc: denied { sys_module } for pid=879 exe=/usr/sbin/radvd capability=16 scontext=system_u:system_r:radvd_t tcontext=system_u:system_r:radvd_t tclass=capability

However I can't work out what it does to cause that! The strace.out file contains no query_module() or create_module() call.

CAP_SYS_MODULE is only required for the create_module(), init_module(), delete_module() calls and for modifying the cap-bound sysctl variable. Does lsmod show any difference before and after radvd is started?

--
Stephen D. Smalley, NAI Labs
[email protected]

--
You have received this message because you are subscribed to the selinux list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.