Skip to contentSkip to conversation

HDSP start problem

DISCUSSION Marcus Andersson 2 participants 2 messages Jun 24, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

I sometimes get this output when trying to start ALSA:

Starting sound driver: snd-hdsp PCI: Found IRQ 10 for device 00:0d.0
PCI: Sharing IRQ 10 with 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:452: wait for FIFO status <= 0 failed
after 100 iterations
looks like a multiface
done

When this happens, the card will not work. I must reboot and hope it doesn't happen again.

Marcus

-------------------------------------------------------
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/

#1 lore raw
Quoted 11 lines

Starting sound driver: snd-hdsp PCI: Found IRQ 10 for device 00:0d.0
PCI: Sharing IRQ 10 with 00:07.2
PCI: Sharing IRQ 10 with 00:07.3
ALSA ../../alsa-kernel/pci/rme9652/hdsp.c:452: wait for FIFO status <= 0 failed
after 100 iterations
looks like a multiface
done

When this happens, the card will not work. I must reboot and hope it doesn't happen again.

sounds like a definite bug. apparently, there is some condition that leads to the h/w not being ready quickly enough but we ignore it.

there are other problems right now. myself and a few others have no playback whatsoever, even with the old version (1.1) of the driver.

work continues.

--p

-------------------------------------------------------
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/