Skip to contentSkip to conversation

snd_pcm_start fails

DISCUSSION Joshua Haberman 2 participants 3 messages Jul 4, 2002 – Jul 5, 2002

lore
Share & tools
lore
#0 lore raw

I am stumped. This short and simple program fails for me:

---

#include <alsa/asoundlib.h>

#include <assert.h>

#define NOFAIL == 0 || (assert(0), 1)

int main() {
    snd_pcm_t *playback_handle;
    snd_pcm_hw_params_t *hw_params;
    snd_output_t *debug;

    snd_output_stdio_attach(&debug, stdout, 0) NOFAIL;

    /* I have tried both hw:0 and plughw:0 */
    snd_pcm_open( &playback_handle, "hw:0", SND_PCM_STREAM_PLAYBACK, 0) NOFAIL;

    snd_pcm_hw_params_malloc( &hw_params ) NOFAIL;

    snd_pcm_hw_params_any( playback_handle, hw_params ) NOFAIL;
    snd_pcm_hw_params_set_access( playback_handle, hw_params, SND_PCM_ACCESS_MMAP_INTERLEAVED ) NOFAIL;
    snd_pcm_hw_params_set_format( playback_handle, hw_params,SND_PCM_FORMAT_S16 ) NOFAIL;
    snd_pcm_hw_params_set_rate( playback_handle, hw_params, 44100, 0 ) NOFAIL;
    snd_pcm_hw_params_set_channels( playback_handle, hw_params, 2 ) NOFAIL;
    snd_pcm_hw_params_set_period_size( playback_handle, hw_params, 2048, 0 ) NOFAIL;
    snd_pcm_hw_params( playback_handle, hw_params ) NOFAIL;

    snd_pcm_prepare( playback_handle ) NOFAIL;
    snd_pcm_dump( playback_handle, debug );
    snd_pcm_start( playback_handle ) NOFAIL;
}

---

Everything seems to be in good shape up until the call to snd_pcm_start, but then the snd_pcm_start fails. Here is the output:

---

Hardware PCM card 0 'Sound Blaster Live!' device 0 subdevice -1

Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16
buffer_size : 16384
period_size : 2048
period_time : 46439
tick_time : 10000
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 2048
xfer_align : 2048
start_threshold : 1
stop_threshold : 16384
silence_threshold: 0
silence_size : 0
boundary : 1073741824
ALSA lib pcm_hw.c:384:(snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: Broken pipe
display: display.c:29: main: Assertion `0' failed.
Aborted

---

Any ideas?? This is ALSA 0.9.0rc1, kernel 2.4.17, emu10k1 as you can see. Other ALSA apps such as alsaplayer and JACK work fine.

Josh

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Caffeinated soap. No kidding.
http://thinkgeek.com/sf

#1 lore raw
Quoted 1 line · * To [email protected] ([email protected]) wrote:

I am stumped. This short and simple program fails for me:

Wingo solved the mystery for me. Apparently you are required to do an mmap_begin and mmap_commit before you can call snd_pcm_start.

Josh

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Caffeinated soap. No kidding.
http://thinkgeek.com/sf

#2 lore raw
Quoted 5 lines · * To [email protected] ([email protected]) wrote:
Quoted 1 line

I am stumped. This short and simple program fails for me:

Wingo solved the mystery for me. Apparently you are required to do an mmap_begin and mmap_commit before you can call snd_pcm_start.

or more generally: you have to put some data in place (somehow) before calling start, unless you used the "start on data ready" flag during setup.

--p

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Bringing you mounds of caffeinated joy.
http://thinkgeek.com/sf