Skip to contentSkip to conversation

UML - part 1 of 2

PATCH New Jeff Dike 1 participant 1 message Jul 18, 2002

Subsystems (4)
Network drivers VFS Kbuild Char and misc drivers
lore
Share & tools
lore

Jeff Dike

author
#0 lore raw

PATCH 1/1 UML - part 1 of 2

This patch contains all of the changes to generic code needed by UML:

CREDITS -
Changes my address and adds a UML credit for Lars Brinkoff.

MAINTAINERS -
Adds a UML entry.

Makefile -
When ARCH=um is on the command line to do a UML build, the old value
of ARCH is saved in $(SUBARCH) for the later use of the UML build.

drivers/char/Makefile -
Sets KEYMAP, KEYBD, CONSOLE empty to prevent hardware drivers from
being compiled in.

drivers/net/setup.c -
Backs out a UML hook which leaked into your tree which UML no
longer uses.

include/linux/linkage.h -
UML needs FASTCALL defined as regparm(3), too.

include/linux/kernel_stat.h -
Bumps DK_MAX_MAJOR to 99 so that the UML block driver (major 98)
gets stats.

init/do_mounts.c -
Adds a set of entries to dev_name_struct for the UML block device.

Jeff

CREDITS +2 -1
diff -Naur -X exclude-files orig/CREDITS linus/CREDITS
@@ -433,6 +433,7 @@
 E: [email protected]
 W: http://lars.nocrew.org/
 D: dsp56k device driver
+D: ptrace proxy in user mode kernel port
 S: Kopmansg 2
 S: 411 13  Goteborg
 S: Sweden

@@ -725,7 +726,7 @@
 E: [email protected]
 W: http://user-mode-linux.sourceforge.net
 D: User mode kernel port
-S: RR1 Box 67C
+S: 375 Tubbs Hill Rd
 S: Deering NH 03244
 S: USA
MAINTAINERS +8 -0
diff -Naur -X exclude-files orig/MAINTAINERS linus/MAINTAINERS
@@ -1842,6 +1842,14 @@
 L:	[email protected]
 W:	http://usb.in.tum.de
 S:	Maintained
+
+USER-MODE LINUX
+P:	Jeff Dike
+M:	[email protected]
+L:	[email protected]
+L:	[email protected]
+W:	http://user-mode-linux.sourceforge.net
+S:	Maintained
 	
 USB "USBNET" DRIVER
 P:	David Brownell
Makefile +9 -1
diff -Naur -X exclude-files orig/Makefile linus/Makefile
@@ -27,7 +27,15 @@
 
 KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 
-ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
+# SUBARCH tells the usermode build what the underlying arch is.  That is set
+# first, and if a usermode build is happening, the "ARCH=um" on the command
+# line overrides the setting of ARCH below.  If a native build is happening,
+# then ARCH is assigned, getting whatever value it gets normally, and 
+# SUBARCH is subsequently ignored.
+
+SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
+ARCH := $(SUBARCH)
+
 KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e "s/-//g")
 
 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
drivers/char/Makefile +6 -0
diff -Naur -X exclude-files orig/drivers/char/Makefile linus/drivers/char/Makefile
@@ -60,6 +60,12 @@
   endif
 endif
 
+ifeq ($(ARCH),um)
+  KEYMAP   =
+  KEYBD    =
+  CONSOLE  =
+endif
+
 ifeq ($(ARCH),sh)
   KEYMAP   =
   KEYBD    =
drivers/net/setup.c +0 -4
diff -Naur -X exclude-files orig/drivers/net/setup.c linus/drivers/net/setup.c
@@ -28,7 +28,6 @@
 extern int lmc_setup(void);
 
 extern int madgemc_probe(void);
-extern int uml_net_probe(void);
 
 /* Pad device name to IFNAMSIZ=16. F.e. __PAD6 is string of 9 zeros. */
 #define __PAD6 "\0\0\0\0\0\0\0\0\0"

@@ -102,9 +101,6 @@
  */  
 #ifdef CONFIG_MADGEMC
 	{madgemc_probe, 0},
-#endif
-#ifdef CONFIG_UML_NET
-	{uml_net_probe, 0},
 #endif
  
 	{NULL, 0},
include/linux/kernel_stat.h +1 -1
diff -Naur -X exclude-files orig/include/linux/kernel_stat.h linus/include/linux/kernel_stat.h
@@ -12,7 +12,7 @@
  * used by rstatd/perfmeter
  */
 
-#define DK_MAX_MAJOR 16
+#define DK_MAX_MAJOR 99
 #define DK_MAX_DISK 16
 
 struct kernel_stat {
include/linux/linkage.h +1 -1
diff -Naur -X exclude-files orig/include/linux/linkage.h linus/include/linux/linkage.h
@@ -56,7 +56,7 @@
 # define ATTRIB_NORET  __attribute__((noreturn))
 # define NORET_AND     noreturn,
 
-#ifdef __i386__
+#if defined(__i386__) || defined(__arch_um__)
 #define FASTCALL(x)	x __attribute__((regparm(3)))
 #else
 #define FASTCALL(x)	x
init/do_mounts.c +16 -0
diff -Naur -X exclude-files orig/init/do_mounts.c linus/init/do_mounts.c
@@ -156,6 +156,22 @@
 	{ "pf",		0x2f00 },
 	{ "apblock", APBLOCK_MAJOR << 8},
 	{ "ddv", DDV_MAJOR << 8},
+ 	{ "ubd0", UBD_MAJOR << 8 | 0 << 4},
+ 	{ "ubda", UBD_MAJOR << 8 | 0 << 4},
+ 	{ "ubd1", UBD_MAJOR << 8 | 1 << 4},
+ 	{ "ubdb", UBD_MAJOR << 8 | 1 << 4},
+ 	{ "ubd2", UBD_MAJOR << 8 | 2 << 4},
+ 	{ "ubdc", UBD_MAJOR << 8 | 2 << 4},
+ 	{ "ubd3", UBD_MAJOR << 8 | 3 << 4},
+ 	{ "ubdd", UBD_MAJOR << 8 | 3 << 4},
+ 	{ "ubd4", UBD_MAJOR << 8 | 4 << 4},
+ 	{ "ubde", UBD_MAJOR << 8 | 4 << 4},
+ 	{ "ubd5", UBD_MAJOR << 8 | 5 << 4},
+ 	{ "ubdf", UBD_MAJOR << 8 | 5 << 4},
+ 	{ "ubd6", UBD_MAJOR << 8 | 6 << 4},
+ 	{ "ubdg", UBD_MAJOR << 8 | 6 << 4},
+ 	{ "ubd7", UBD_MAJOR << 8 | 7 << 4},
+ 	{ "ubdh", UBD_MAJOR << 8 | 7 << 4},
 	{ "jsfd",    JSFD_MAJOR << 8},
 #if defined(CONFIG_ARCH_S390)
 	{ "dasda", (DASD_MAJOR << MINORBITS) },