Skip to contentSkip to conversation

sequencer client subscription problem

DISCUSSION rob buse 1 participant 2 messages Aug 15, 2002 – Aug 16, 2002

lore
Share & tools
lore

rob buse

author
#0 lore raw

Hello All,

I have a small problem that I cant figure out. Basically, on startup I'm having my sequencer run through the alsa clients with snd_seq_query_next_client() and snd_seq_query_next_port(). I look for clients with SND_SEQ_PORT_CAP_SUBS_WRITE for output and SND_SEQ_PORT_CAP_SUBS_READ for input, and connect to them accordingly.

Now, perhaps the subscribe mechanism dosnt work the way I think it does...

my code works for my sblives midi input. But when vkeybd is running, its flags are set as follows:

[128: 0 Virtual Keyboard Virtual Keyboard] SND_SEQ_PORT_CAP_READ
SND_SEQ_PORT_CAP_SUBS_READ SND_SEQ_PORT_TYPE_MIDI_GENERIC SND_SEQ_PORT_TYPE_APPLICATION

then I open my own port with the flags :

[129: 6 seq24 seq24 in port]
SND_SEQ_PORT_CAP_READ
SND_SEQ_PORT_CAP_NO_EXPORT
SND_SEQ_PORT_TYPE_MIDI_GENERIC
SND_SEQ_PORT_TYPE_APPLICATION All other subscriptions work, but when I issue a snd_seq_connect_to() from the seq24 port to the vkey port, it fails.
do I need to do more to my port in order to subscribe to an applications port ?

Thanks!
.rob buse

----------------------------------------------------------
music + technology http://filter24.org

-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390

author
#1 lore raw

re: sequencer client subscription problem (nevermind)

sorry for the bandwidth, I just solved my problem. I didnt realize that you had to call snd_seq_connect_from(). In case anyone was wondering :) .rob

Quoted 29 lines

Hello All,

I have a small problem that I cant figure out. Basically, on startup I'm having my sequencer run through the alsa clients with snd_seq_query_next_client() and snd_seq_query_next_port(). I look for clients with SND_SEQ_PORT_CAP_SUBS_WRITE for output and SND_SEQ_PORT_CAP_SUBS_READ for input, and connect to them accordingly.

Now, perhaps the subscribe mechanism dosnt work the way I think it does...

my code works for my sblives midi input. But when vkeybd is running, its flags are set as follows:

[128: 0 Virtual Keyboard Virtual Keyboard] SND_SEQ_PORT_CAP_READ
SND_SEQ_PORT_CAP_SUBS_READ SND_SEQ_PORT_TYPE_MIDI_GENERIC SND_SEQ_PORT_TYPE_APPLICATION

then I open my own port with the flags :

[129: 6 seq24 seq24 in port]
SND_SEQ_PORT_CAP_READ
SND_SEQ_PORT_CAP_NO_EXPORT
SND_SEQ_PORT_TYPE_MIDI_GENERIC
SND_SEQ_PORT_TYPE_APPLICATION All other subscriptions work, but when I issue a snd_seq_connect_to() from the seq24 port to the vkey port, it fails.
do I need to do more to my port in order to subscribe to an applications port ?

Quoted 8 lines

Thanks!
.rob buse

----------------------------------------------------------
music + technology http://filter24.org

----------------------------------------------------------
music + technology http://filter24.org

-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390