Skip to contentSkip to conversation

2.5.31 qlogic error "this should not happen"

DISCUSSION [email protected] 2 participants 2 messages Aug 25, 2002 – Aug 26, 2002 SCSI

lore
Share & tools
lore
#0 lore raw
Quoted 2 lines

I occasionally saw that error on our 2.4 RAID system; it went away when I increased the size of the handles array in qlogicfc.h:

-#define QLOGICFC_REQ_QUEUE_LEN 127 /* must be power of two - 1 */ +#define QLOGICFC_REQ_QUEUE_LEN 255 /* must be power of two - 1 */

That change in addition to Doug's patch in
http://marc.theaimsgroup.com/?l=linux-kernel&m=103005703808312&w=2
have done the trick. 2.5.31-mm1-dl-ew completed the 54 hour benchmarathon. (first 2.5 kernel to finish).

Details at:
http://home.earthlink.net/~rwhron/kernel/bigbox.html

Signature · 1 line
Randy Hron
#1 lore raw
Quoted 6 lines · On Sun, Aug 25, 2002 at 03:18:54PM -0400, [email protected] wrote:
Quoted 2 lines

I occasionally saw that error on our 2.4 RAID system; it went away when I increased the size of the handles array in qlogicfc.h:

(quoted diff) +1 -1
-#define QLOGICFC_REQ_QUEUE_LEN  127 /* must be power of two - 1 */
+#define QLOGICFC_REQ_QUEUE_LEN  255 /* must be power of two - 1 */
Quoted 9 lines

That change in addition to Doug's patch in
http://marc.theaimsgroup.com/?l=linux-kernel&m=103005703808312&w=2
have done the trick. 2.5.31-mm1-dl-ew completed the 54 hour benchmarathon. (first 2.5 kernel to finish).

Details at:
http://home.earthlink.net/~rwhron/kernel/bigbox.html

Signature · 1 line
Randy Hron

That's a huge amount of data. Can you show cat /proc/scsi/scsi of the machine (as well as the lspci etc)?

Does RAID-5 mean you have a storage array attached? i.e. IBM 3542, fastt 200?

It looks like the latest qlogic qla driver includes 2.5.x support, I haven't tried it but will at some time:

http://download.qlogic.com/drivers/5639/qla2x00-v6.1b5-dist.tgz

-- Patrick Mansfield