Skip to contentSkip to conversation

aic7xxx & software raid5 & 2.4.20pre2 (Happened terrible)

DISCUSSION Andrey Nekrasov 1 participant 1 message Aug 26, 2002

lore
Share & tools
lore
#0 lore raw

Hello.

1. kernel 2.4.20pre2
hardware Intel LanceWood L440GX with onboard AIC controller
4 hdd, "Vendor: IBM Model: DDYS-T18350M Rev: S93E

2. software raid5:

Personalities : [raid1] [raid5] [multipath] read_ahead 1024 sectors
md0 : active raid5 sdd2[3] sdc2[2] sdb2[1] sda2[0]

       52146624 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU]

unused devices: <none>

3. log:

...

Aug 21 16:37:29 ruby kernel: 09:00: rw=0, want=140379796, limit=52146624
Aug 21 16:37:29 ruby kernel: attempt to access beyond end of device
Aug 21 16:37:29 ruby kernel: 09:00: rw=0, want=1938395668, limit=52146624
Aug 21 16:37:29 ruby kernel: attempt to access beyond end of device
Aug 21 16:37:29 ruby kernel: 09:00: rw=0, want=1971900992, limit=52146624
Aug 21 16:37:29 ruby kernel: attempt to access beyond end of device
Aug 21 16:37:29 ruby kernel: 09:00: rw=0, want=1971900992, limit=52146624
Aug 21 16:37:29 ruby kernel: attempt to access beyond end of device
Aug 21 16:37:29 ruby kernel: 09:00: rw=0, want=140379796, limit=52146624
Aug 24 16:30:49 ruby kernel: attempt to access beyond end of device
Aug 24 16:30:49 ruby kernel: 09:00: rw=0, want=140379796, limit=52146624
Aug 24 16:30:49 ruby kernel: attempt to access beyond end of device
Aug 24 16:30:49 ruby kernel: 09:00: rw=0, want=1938395668, limit=52146624
Aug 24 16:30:49 ruby kernel: attempt to access beyond end of device
Aug 24 16:30:49 ruby kernel: 09:00: rw=0, want=1971900992, limit=52146624
Aug 24 16:30:49 ruby kernel: attempt to access beyond end of device
Aug 24 16:30:49 ruby kernel: 09:00: rw=0, want=1971900992, limit=52146624
Aug 24 16:30:49 ruby kernel: attempt to access beyond end of device
Aug 24 16:30:49 ruby kernel: 09:00: rw=0, want=140379796, limit=52146624

...

4. after uptime 8 day /dev/md0 - go "read-only" (tune2fs enable on /dv/md0 "Errors behavior:Remount read-only") and e2fsck found many error (empty lost+found)

Question: why such can occur and what to make to avoid repetition?

Signature · 2 lines
bye.
Andrey Nekrasov, SpyLOG.