Skip to contentSkip to conversation

M-Audio Sonica (USB) support

DISCUSSION Stephen Hassard 1 participant 1 message Aug 28, 2002

lore
Share & tools
lore
#0 lore raw

Hi,

I was trying to get my M-Audio Sonica to work under Alsa. It's a nifty little single channel out 24/96 USB audio device. Here's the product
page: http://www.m-audio.com/products/consumer/sonica.php

I'm running the CVS version of Alsa from last night (12 hours ago).

snd-usb-audio modprobes fine and doesn't give me any errors. /dev/dsp doesn't get created properly (snd-pcm-oss is loaded properly), not does /proc/asound/cards list anything ('--- no soundcards ---'). The device is properly detected by the linux kernel, as I get properly connect/disconnect messages. I'm using kernel v2.4.20pre4. The device is plugged into a UHCI controller (it's a USB 2.0 NEC controller).

I was taking a look around the source to see if I could add the Sonica device ID, but I can't seem to find where to hack it (if it's even needed). Anyhow, the device ID for the Sonica is vend/prod 0x763/0x2805. Any help would be greatly appreciated.

Thanks,
Stephen Hassard

-------------------------------------------------------
This sf.net email is sponsored by: Jabber - The world's fastest growing real-time communications platform! Don't just IM. Build it in!
http://www.jabber.com/osdn/xim