Skip to contentSkip to conversation

IDE-DVD problems [excuse former idiotic topic]

DISCUSSION Joseph N. Hall 1 participant 1 message Sep 4, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 9 lines · Benjamin LaHaise
Quoted 4 lines · Joseph N. Hall

* Performance is terrible
* booting with noapic makes no difference
* Performance seems to indicate some kind of difficulties in the kernel, perhaps connected to interrupt handling

That's what happens when DMA isn't being used: the kernel spends lots of time copying data from the drive in the interrupt handler and not allowing userspace to execute.

Right, but it will work with or without DMA, for some definition of "work." Or it should work, right?

The Sony DVD-ROM performs acceptably w/o DMA (FIC Sabre box w/ 1Ghz Pentium, Intel chipset) although it runs faster and smoother w/ DMA turned on. Same observation w.r.t CD-ROM. The LF-D210 (probably it's a D231, they all identify as D210 I think)

Do you know anyone who has gotten this particular drive to work? Or for that matter if there are any troubles with the KT333 chipset? I wouldn't be surprised if there are some interrupt "issues" with KT333 because my plain old IDE performance was not good under the stock 2.4.18-3 kernel ... it would do some of the same things (lots of system time, temporary "pauses", etc.).

I wouldn't mind a m/b change although most of the good Athlon options are KT333, which probably doesn't solve anything. I *was* going to build a dual box with an S2466 ... maybe I should reconsider doing that.

I am also having problems with the C-Media onboard audio + ALSA (0.9 rc3) ... it hangs the system (totally) after playing for a few seconds. So that is another strike against this particular h/w configuration.

-joseph