Atech Pro II flash card reader(s)
I am trying to make an Atech Pro II card reader work under Linux. Everywhere I look it says that it is supported under Linux, but I can't find a single thing anywhere on the Internet using Google. I did find this page using the Google Groups searcher:
http://groups.google.com/groups?q=Atech+USB+Linux&hl=en&lr=&ie=UTF-8&oe=UTF-8&selm=slrnaie1su.1f9.danceswithcrows%40samantha.crow202.dyndns.org&rnum=1
(sorry 'bout the long URL)
Can anyone help me?
Thanks,
Brad
__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
Quoted 1 line · Brad Chapman
I am trying to make an Atech Pro II card reader work under Linux.
The USB device database says:
This device can be made fully functional with the addition of the following entry to /usr/src/linux/drivers/usb/storage/unusual_devs.h:
UNUSUAL_DEV( 0x0aec,0x5010,0x0000,0x1a00, "Atech", "Pro II MultiCard",
US_SC_SCSI, US_PR_BULK, NULL, US_FL_FIX_INQUIRY ),
Try, and report. If this works it should be added to the stock kernel. The numbers given are 0x0aec: Vendor ID, 0x5010: Product ID, 0x0000-0x1a00:
Revisions. If you have a later revision, increase 0x1a00, or just write 0xffff.
Mr. Andries,
Quoted 9 lines · --- Andries Brouwer
Quoted 1 line · Brad Chapman
I am trying to make an Atech Pro II card reader work under Linux.
The USB device database says:
This device can be made fully functional with the addition of the following entry
to/usr/src/linux/drivers/usb/storage/unusual_devs.h:
Quoted 7 lines
UNUSUAL_DEV( 0x0aec,0x5010,0x0000,0x1a00, "Atech", "Pro II MultiCard",
US_SC_SCSI,US_PR_BULK, NULL,US_FL_FIX_INQUIRY),Try, and report. If this works it should be added to the stock kernel. The numbers given are
0x0aec: Vendor ID,0x5010: Product ID, 0x0000-0x1a00:
Revisions. If you have a later revision, increase0x1a00, or just write0xffff.
Sorry for taking so long to report back,but I've been busy.
Results: Adding the above macro entry to line 82 of unusual_devs.h
(2.4.19) resulted in the flash reader being detected by usb_storage. When the sd_mod module was loaded, /dev/discs/disc1 snapped into being. I accessed the CompactFlash drive as part1 with an 8MB VFAT-formatted unit and was able to perform any filesystem operation needed.
This should be pushed into a USB BK/CVS tree or even forwarded to
Marcelo. BTW, is there a way to keep sd_mod from failing to read the empty drives?
Thanks,
Brad Chapman
__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com