Skip to contentSkip to conversation

irman takes 50x longer without O(1) on uniprocessor

DISCUSSION [email protected] 1 participant 1 message Sep 14, 2002

lore
Share & tools
lore
#0 lore raw

I've noticed running irman on uniprocessor with the O(1) scheduler takes a lot less time than the mainline scheduler. Only 2.4.20-pre5 and 2.4.20-pre6 below don't have a version of the O(1) scheduler:

seconds to run irman 3 times
2.4.20-pre4-ac1 1420
2.4.20-pre5-ac1 1872
2.4.20-pre5 162088
2.4.20-pre5aa1 2264
2.4.20-pre5aa2 2274
2.4.20-pre6 111651
2.5.32-viro-mm1 2209
2.5.33-mm1-poll 2168
2.5.33-mm1 1679
2.5.33-mm5 2374
2.5.33 2408

There are some differences in context switch, user, and system times between O(1) haves and have nots. Oddly, the user time without O(1) is higher, yet it takes longer to complete.

vmstat 60 on 2.4.20-pre6
procs memory swap io system cpu

 r  b  w   swpd   free   buff  cache  si  so    bi    bo   in    cs  us  sy  id
 3  0  0   2012 364212  10468   2264   0   0     0     1  100 27467  18  82   0
 2  0  0   2012 364172  10492   2268   0   0     0     1  100 27488  18  82   0
 2  0  0   2012 364144  10508   2268   0   0     0     1  100 27555  18  82   0

vmstat 60 on 2.4.20-pre5-ac1
procs memory swap io system cpu

 r  b  w   swpd   free   buff  cache  si  so    bi    bo   in    cs  us  sy  id
 3  0  0   1692 365848   1488   7756   0   0     0     1  100 36821   4  96   0
 2  0  0   1692 365832   1504   7756   0   0     0     1  100 37334   6  94   0
 3  0  0   1692 365816   1520   7756   0   0     0     1  100 37005   5  95   0

Quad xeon doesn't have a huge difference in "real" time to run irman.

Does anyone know what would cause a 50-100x difference in time to execute irman on uniprocessor?

Signature · 2 lines
Randy Hron
http://home.earthlink.net/~rwhron/kernel/bigbox.html