Skip to contentSkip to conversation

Loading kernel

DISCUSSION Srinivas Chavva 3 participants 3 messages Sep 20, 2002 – Sep 21, 2002

lore
Share & tools
lore
#0 lore raw

I installed RedHat Linux 7.3 on my system. When I entered as the root and typed "uname -r' I got the kernel version as 2.4.18.
When I executed the command "rpm -q kernel-headers kernel-source" I got a message "package:kernel-headers not installed
package: kernel-source not installed".
So I downloaded the kernel, unpacked it, configured the kernel, compiled it with no no problems. I stored the bzImage into the /boot directory as linux-2.4.18 and edited the lilo.conf file by adding this as the image. Then I compiled the lilo.conf file. I got no errors.
When I rebooted the system and selected the kernel linux-2.4.18 I got the following errors and my system got hanged.
The errors are as follows
"
/etc/rc.sysinit: /var/log/dmesg: No such file or directory
/etc/rc.sysinit: /var/log/ksyms.o: No such file or directory
INIT: Entering run level:3
Updating /etc/fstab execvp: No such file or directory
[FAILED]
Checking for new hardware /etc/rc3.d/S05Kudzu:/usr/sbin/kudzu: No such file or directory
[FAILED]
touch:creating '/var/lock/subsys/kudzu': No such file or directory
"
After this my system got hanged. I was able to log in to the original linux kernel but this kernel linux-2.4.18 is not working.
I wanted to know what the error was due to and how to use the kernel linux-2.4.18 bec when I configured and compiled the kernel there were no errors. Thanking You.
Regards,
Srinivas Chavva

__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com

#1 lore raw

Hi,

Quoted 7 lines · Srinivas Chavva

"
/etc/rc.sysinit: /var/log/dmesg: No such file or directory
/etc/rc.sysinit: /var/log/ksyms.o: No such file or directory
INIT: Entering run level:3
Updating /etc/fstab execvp: No such file or directory

Quoted 8 lines

[FAILED]
Checking for new hardware /etc/rc3.d/S05Kudzu:/usr/sbin/kudzu: No such file or directory
[FAILED]
touch:creating '/var/lock/subsys/kudzu': No such file or directory
"

That's really no kernel issue. The kernel seems to have booted fine, and I'd doubt that's fs corruption.

Thunder

Signature · 1 line
assert(typeof((fool)->next) == typeof(fool));	/* wrong */
#2 lore raw
Quoted 17 lines · Srinivas Chavva
Quoted 7 lines

"
/etc/rc.sysinit: /var/log/dmesg: No such file or directory
/etc/rc.sysinit: /var/log/ksyms.o: No such file or directory
INIT: Entering run level:3
Updating /etc/fstab execvp: No such file or directory

Quoted 8 lines

[FAILED]
Checking for new hardware /etc/rc3.d/S05Kudzu:/usr/sbin/kudzu: No such file or directory
[FAILED]
touch:creating '/var/lock/subsys/kudzu': No such file or directory
"

Quoted 2 lines

That's really no kernel issue. The kernel seems to have booted fine, and I'd doubt that's fs corruption.

Agreed, except that I think that the old kernel has been re-loaded instead of the new one, because lilo hasn't been re-run.

Lilo does not automatically re-read it's config file, like grub does, (apparently, I use lilo exclusively), and you need to run lilo before re-booting after installing a new kernel image.

John.