Serial port monitoring with keyboard LEDs
Hi,
I'm trying to add code to use the keyboard LEDs as serial port Tx/Rx LEDs, somwehat analogous to an external modem, (I.E. for links to things other than modems, that typically don't have LEDs).
I'm using a 2.4.19 kernel as a reference, and looking at putting my code in /drivers/char/serial.c, specifically at the serial_in and serial_out functions, is this the Right Thing or not? Obviously the LEDs won't actually reflect what is going out on the serial line, because of buffering, etc, and also, what's going to be more useful - just flash on and off for each byte sent, or LED on for 1, LED off for 0 bit? That would be even more of an approximation to what's actually happening on the serial line, because obviously we're sending a byte at a time to the serial port.
Any pointers to docs I should read would be appreicated :-)
John.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 8 lines · On Sun, 22 Sep 2002 07:06, [email protected] wrote:
I'm using a 2.4.19 kernel as a reference, and looking at putting my code in /drivers/char/serial.c, specifically at the
serial_inandserial_outfunctions, is this the Right Thing or not? Obviously the LEDs won't actually reflect what is going out on the serial line, because of buffering, etc, and also, what's going to be more useful - just flash on and off for each byte sent, or LED on for 1, LED off for 0 bit? That would be even more of an approximation to what's actually happening on the serial line, because obviously we're sending a byte at a time to the serial port.
Not sure about the serial code.
However you can't update the keyboard LEDs at anything like normal serial port rates. And even if you could update at 10kHz, you just varied the brightness, rather than caused any real "blinking"
Quoted 1 line
Any pointers to docs I should read would be appreicated :-)
You are going to cause problems. There are other users of keyboard LEDs in the kernel (eg for notifying of an oops). It isn't looking too good.
If you are really intent on doing this, you can probably manage this from userspace, using the event interface and the application that is sending data over the serial interface. Of course, you'd need to have a suitable keyboard (probably only USB or ADB in 2.4.x).
Brad
- --
http://conf.linux.org.au. 22-25Jan2003. Perth, Australia. Birds in Black. -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE9jWKSW6pHgIdAuOMRAs6lAJ9w0Rn9N31TNrb6+jk2a3kwTA9RZQCeLV40 bDEJ/o3W5w53efj9lIIwRys=
=t+NX
-----END PGP SIGNATURE-----