Skip to contentSkip to conversation

UML compile error

DISCUSSION [email protected] 2 participants 2 messages Sep 25, 2002 – Sep 26, 2002 User-mode Linux (UML)

lore
Share & tools
lore
#0 lore raw

I tried to test UML, and tried 2.5.36 through to 38, but have been unable to comile it. I tried using the default config, as well as my own config, but both 37 and 38 give the following error.

gcc -Wp,-MD,./.sched.o.d -D__KERNEL__ -I/usr/src/linux-2.5.38/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -g -U__i386__ -Ui386 -D__arch_um__ -DSUBARCH=\"i386\" -D_LARGEFILE64_SOURCE -I/usr/src/linux-2.5.38/arch/um/include -Derrno=kernel_errno -nostdinc -iwithprefix include -fno-omit-frame-pointer -DKBUILD_BASENAME=sched -c -o sched.o sched.c
In file included from /usr/src/linux-2.5.38/include/asm/irq.h:9,

                 from /usr/src/linux-2.5.38/include/linux/nmi.h:7,
                 from sched.c:20:

/usr/src/linux-2.5.38/include/asm/arch/irq.h:16:25: irq_vectors.h: No such file or directory make[1]: *** [sched.o] Error 1
make[1]: Leaving directory `/usr/src/linux-2.5.38/kernel'
make: *** [kernel] Error 2

Adam

#1 lore raw

Hello!

Quoted 11 lines · On Wed, Sep 25, 2002 at 08:56:04PM +1000, [email protected] wrote:

I tried to test UML, and tried 2.5.36 through to 38, but have been unable to comile it. I tried using the default config, as well as my own config, but both 37 and 38 give the following error.
gcc -Wp,-MD,./.sched.o.d -D__KERNEL__ -I/usr/src/linux-2.5.38/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -g -U__i386__ -Ui386 -D__arch_um__ -DSUBARCH=\"i386\" -D_LARGEFILE64_SOURCE -I/usr/src/linux-2.5.38/arch/um/include -Derrno=kernel_errno -nostdinc -iwithprefix include -fno-omit-frame-pointer -DKBUILD_BASENAME=sched -c -o sched.o sched.c
In file included from /usr/src/linux-2.5.38/include/asm/irq.h:9,

                 from /usr/src/linux-2.5.38/include/linux/nmi.h:7,
                 from sched.c:20:

/usr/src/linux-2.5.38/include/asm/arch/irq.h:16:25: irq_vectors.h: No such file or directory make[1]: *** [sched.o] Error 1
make[1]: Leaving directory `/usr/src/linux-2.5.38/kernel'
make: *** [kernel] Error 2

You need to apply a uml-patch-2.5.38-1.bz2 available from somewhere at
http://user-mode-linux.sf.net

Also you need below patch to fix makefiles.

Bye,
Oleg

===== arch/um/Makefile 1.3 vs edited =====

arch/um/Makefile +6 -9
@@ -30,15 +30,10 @@
 LINK_PROFILE = $(PROFILE) -Wl,--wrap,__monstartup
 endif
 
-ARCH_SUBDIRS = $(ARCH_DIR)/drivers $(ARCH_DIR)/kernel \
-	$(ARCH_DIR)/sys-$(SUBARCH) $(ARCH_DIR)/os-$(OS)
-
-SUBDIRS += $(ARCH_SUBDIRS)
-
 core-y			+= $(ARCH_DIR)/kernel/		 \
-			+= $(ARCH_DIR)/drivers/          \
-			+= $(ARCH_DIR)/sys-$(SUBARCH)/	 \
-			+= $(ARCH_DIR)/os-$(OS)/
+			   $(ARCH_DIR)/drivers/          \
+			   $(ARCH_DIR)/sys-$(SUBARCH)/	 \
+			   $(ARCH_DIR)/os-$(OS)/
 
 libs-$(CONFIG_PT_PROXY)	+= $(ARCH_DIR)/ptproxy/
 
@@ -63,7 +58,9 @@
 	-DELF_ARCH=$(ELF_ARCH) -DELF_FORMAT=\"$(ELF_FORMAT)\"
 
 LD_vmlinux = $(CC) 
-LDFLAGS_vmlinux = $(LINK_PROFILE) $(LINK_WRAPS) -static $(ARCH_DIR)/main.o 
+LDFLAGS_vmlinux = $(LINK_PROFILE) $(LINK_WRAPS) -static $(ARCH_DIR)/main.o -L/usr/lib
+
+LIBS += -lutil
 
 SYMLINK_HEADERS = include/asm-um/archparam.h include/asm-um/system.h \
 	include/asm-um/sigcontext.h include/asm-um/processor.h \

===== arch/um/Makefile-os-Linux 1.1 vs edited =====

arch/um/Makefile-os-Linux +0 -1
@@ -4,4 +4,3 @@
 #
 
 SUBDIRS += $(ARCH_DIR)/os-$(OS)/drivers
-LIBS += $(ARCH_DIR)/os-$(OS)/drivers/drivers.o

===== arch/um/kernel/Makefile 1.2 vs edited =====

arch/um/kernel/Makefile +0 -1
@@ -10,7 +10,6 @@
 	umid.o user_util.o
 
 obj-$(CONFIG_BLK_DEV_INITRD) += initrd_kern.o initrd_user.o
-endif
 
 # user_syms.o not included here because Rules.make has its own ideas about
 # building anything in export-objs