2.5.38 - Config.in: Second extended fs rename / move Ext3 to a wiser place
PATCH 1/1 2.5.38 - Config.in: Second extended fs rename / move Ext3 to a wiser place
Hi there,
these are just cosmetic fixes.
I think we can do the following:
1. rename: "Second extended fs support" to "Ext2 file system support" (to be equal to Ext3fs)
2. move: "Ext3 journalling file system support" near under to Ext2 fs.
Coments?
--
I also thought about splitting the "Journal Filesystems" into an extra menu option just to clear up the whole menu a bit since we have: ReiserFS, Ext3, XFS, JFS, JFFS and JFFSv2. I cooked up a patch which does it, also attached!
Comments?
All against 2.5.38 vanilla.
Linus, if ok, please apply either 2.5_1* and 2.5_2* or 2.5_1* and the patch which removes current journalfs entries and creates a new menu option.
Signature · 8 lines
Kind regards
Marc-Christian Petersen
http://sourceforge.net/projects/wolk
PGP/GnuPG Key: 1024D/569DE2E3DB441A16
Fingerprint: 3469 0CF8 CA7E 0042 7824 080A 569D E2E3 DB44 1A16
Key available at www.keyserver.net. Encrypted e-mail preferred.fs/Config.in +1 -1
@@ -91,7 +91,7 @@ tristate 'ROM file system support' CONFIG_ROMFS_FS -tristate 'Second extended fs support' CONFIG_EXT2_FS +tristate 'Ext2 file system support' CONFIG_EXT2_FS tristate 'System V/Xenix/V7/Coherent file system support' CONFIG_SYSV_FS
# I think it's time to split up the Filesystem menu in a "better reading" way. # So place every Journalling Filesystem into a seperate menu:
# We have: ReiserFS, JFFS, JFFSv2, Ext3, XFS and JFS
fs/Config.in +4 -32
@@ -13,10 +13,6 @@ tristate 'Kernel automounter support' CONFIG_AUTOFS_FS tristate 'Kernel automounter version 4 support (also supports v3)' CONFIG_AUTOFS4_FS -tristate 'Reiserfs support' CONFIG_REISERFS_FS -dep_mbool ' Enable reiserfs debug mode' CONFIG_REISERFS_CHECK $CONFIG_REISERFS_FS -dep_mbool ' Stats in /proc/fs/reiserfs' CONFIG_REISERFS_PROC_INFO $CONFIG_REISERFS_FS - dep_tristate 'ADFS file system support (EXPERIMENTAL)' CONFIG_ADFS_FS $CONFIG_EXPERIMENTAL dep_mbool ' ADFS write support (DANGEROUS)' CONFIG_ADFS_FS_RW $CONFIG_ADFS_FS $CONFIG_EXPERIMENTAL
@@ -26,13 +26,6 @@ dep_tristate 'BFS file system support (EXPERIMENTAL)' CONFIG_BFS_FS $CONFIG_EXPERIMENTAL -tristate 'Ext3 journalling file system support' CONFIG_EXT3_FS -# CONFIG_JBD could be its own option (even modular), but until there are -# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS -# dep_tristate ' Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS -define_bool CONFIG_JBD $CONFIG_EXT3_FS -dep_mbool ' JBD (ext3) debugging support' CONFIG_JBD_DEBUG $CONFIG_JBD - # msdos file systems tristate 'DOS FAT fs support' CONFIG_FAT_FS dep_tristate ' MSDOS fs support' CONFIG_MSDOS_FS $CONFIG_FAT_FS
@@ -42,16 +42,7 @@ dep_tristate ' VFAT (Windows-95) fs support' CONFIG_VFAT_FS $CONFIG_FAT_FS dep_tristate 'EFS file system support (read only) (EXPERIMENTAL)' CONFIG_EFS_FS $CONFIG_EXPERIMENTAL -dep_tristate 'Journalling Flash File System (JFFS) support' CONFIG_JFFS_FS $CONFIG_MTD -if [ "$CONFIG_JFFS_FS" = "y" -o "$CONFIG_JFFS_FS" = "m" ] ; then - int 'JFFS debugging verbosity (0 = quiet, 3 = noisy)' CONFIG_JFFS_FS_VERBOSE 0 - bool 'JFFS stats available in /proc filesystem' CONFIG_JFFS_PROC_FS -fi -dep_tristate 'Journalling Flash File System v2 (JFFS2) support' CONFIG_JFFS2_FS $CONFIG_MTD -if [ "$CONFIG_JFFS2_FS" = "y" -o "$CONFIG_JFFS2_FS" = "m" ] ; then - int ' JFFS2 debugging verbosity (0 = quiet, 2 = noisy)' CONFIG_JFFS2_FS_DEBUG 0 - dep_bool ' JFFS2 support for NAND flash (EXPERIMENTAL)' CONFIG_JFFS2_FS_NAND $CONFIG_EXPERIMENTAL -fi + tristate 'Compressed ROM file system support' CONFIG_CRAMFS bool 'Virtual memory file system support (former shm fs)' CONFIG_TMPFS define_bool CONFIG_RAMFS y
@@ -60,10 +60,6 @@ dep_mbool ' Microsoft Joliet CDROM extensions' CONFIG_JOLIET $CONFIG_ISO9660_FS dep_mbool ' Transparent decompression extension' CONFIG_ZISOFS $CONFIG_ISO9660_FS -tristate 'JFS filesystem support' CONFIG_JFS_FS -dep_mbool ' JFS debugging' CONFIG_JFS_DEBUG $CONFIG_JFS_FS -dep_mbool ' JFS statistics' CONFIG_JFS_STATISTICS $CONFIG_JFS_FS - tristate 'Minix fs support' CONFIG_MINIX_FS tristate 'FreeVxFS file system support (VERITAS VxFS(TM) compatible)' CONFIG_VXFS_FS
@@ -101,13 +101,9 @@ tristate 'UFS file system support (read only)' CONFIG_UFS_FS dep_mbool ' UFS file system write support (DANGEROUS)' CONFIG_UFS_FS_WRITE $CONFIG_UFS_FS $CONFIG_EXPERIMENTAL -tristate 'XFS filesystem support' CONFIG_XFS_FS -dep_mbool ' Realtime support (EXPERIMENTAL)' CONFIG_XFS_RT $CONFIG_XFS_FS $CONFIG_EXPERIMENTAL -dep_mbool ' Quota support' CONFIG_XFS_QUOTA $CONFIG_XFS_FS -if [ "$CONFIG_XFS_QUOTA" = "y" ]; then - define_bool CONFIG_QUOTACTL y -fi - +# Journalling File Systems +source fs/journalfs/Config.in + if [ "$CONFIG_NET" = "y" ]; then mainmenu_option next_comment
fs/journalfs/Config.in +57 -0
57 lines not on this page · raw message
fs/Config.in +8 -6
@@ -26,12 +26,7 @@ dep_tristate 'BFS file system support (EXPERIMENTAL)' CONFIG_BFS_FS $CONFIG_EXPERIMENTAL -tristate 'Ext3 journalling file system support' CONFIG_EXT3_FS -# CONFIG_JBD could be its own option (even modular), but until there are -# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS -# dep_tristate ' Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS -define_bool CONFIG_JBD $CONFIG_EXT3_FS -dep_mbool ' JBD (ext3) debugging support' CONFIG_JBD_DEBUG $CONFIG_JBD +# old ext3fs config place. Moved near to ext2fs # msdos file systems tristate 'DOS FAT fs support' CONFIG_FAT_FS
@@ -93,6 +93,13 @@ tristate 'Ext2 file system support' CONFIG_EXT2_FS +tristate 'Ext3 journalling file system support' CONFIG_EXT3_FS +# CONFIG_JBD could be its own option (even modular), but until there are +# other users than ext3, we will simply make it be the same as CONFIG_EXT3_FS +# dep_tristate ' Journal Block Device support (JBD for ext3)' CONFIG_JBD $CONFIG_EXT3_FS +define_bool CONFIG_JBD $CONFIG_EXT3_FS +dep_mbool ' JBD (ext3) debugging support' CONFIG_JBD_DEBUG $CONFIG_JBD + tristate 'System V/Xenix/V7/Coherent file system support' CONFIG_SYSV_FS tristate 'UDF file system support (read only)' CONFIG_UDF_FS
Quoted 4 lines · Marc-Christian Petersen
Hi there,
these are just cosmetic fixes.
Quoted 8 lines
I think we can do the following:
1. rename: "Second extended fs support" to "Ext2 file system support" (to be equal to Ext3fs)
2. move: "Ext3 journalling file system support" near under to Ext2 fs.
Coments?
What's the point?
Quoted 3 lines
I also thought about splitting the "Journal Filesystems" into an extra menu option just to clear up the whole menu a bit since we have: ReiserFS, Ext3, XFS, JFS, JFFS and JFFSv2. I cooked up a patch which does it, also attached!
The idea makes zero sense. Blockbased filesystems sounds like more useful split if the menu is really to big for you.
Quoted 5 lines · Marc-Christian Petersen
I also thought about splitting the "Journal Filesystems" into an extra menu option just to clear up the whole menu a bit since we have: ReiserFS, Ext3, XFS, JFS, JFFS and JFFSv2. I cooked up a patch which does it, also attached!
I don't think it is very significant that ReiserFS version 3 is a journaling file system in the long term (though it did matter a lot in 2.4), and Reiser4 is arguably not a journaling file system, but rather a wandering log filesystem, so I think that such a categorization is not a good one.
I think that journaling is only a transitory differentiator, and only a differentiator vs. ext2. It would make more sense to call ext2 "Ext2 (obsolete, requires long waits for fsck after crashes )", and then users can decide for themselves who obsoleted it first.;-)
Hans