2.5.39 with contest 0.41
From: Con Kolivas <[email protected]>
[...]
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
ProcessLoad, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2
Why ?
If look at the numbers I assume that 2.5.39 is faster then 2.4.19. Am I missing something?Sorry, typo should read 2.5.39 is faster than 2.4.19 and same as 2.5.38-mm2
Ok.
Quoted 6 lines
Quoted 1 line
I'll run further test...
Not really needed. I'm convinced the difference is there, and the people who can act on the data probably will be happy with that much information too. Some are less satisfied with the quality of the data unless there is firm statistical data to support the hypothesis. Your time is better spent on other things.
I've just ran further tests...
Administrator@OIVT444P ~
$ cat /cygdrive/log/results.log
noload:
Kernel Time CPU Ratio 2.4.19 133.07 98% 1.00 2.4.19 133.16 98% 1.00 2.4.19 135.43 97% 1.02 2.5.38-mm2 138.19 97% 1.04 2.5.38-mm2 138.47 96% 1.04 2.5.38-mm2 138.72 97% 1.04 2.5.38-mm2 139.54 96% 1.05 2.5.38-mm2 139.59 96% 1.05 2.5.38-mm2 139.88 96% 1.05 2.5.39 138.30 96% 1.04 2.5.39 138.63 96% 1.04 2.5.39 138.70 96% 1.04 2.5.39 138.70 96% 1.04 2.5.39 139.44 96% 1.05 2.5.39 139.99 96% 1.05
process_load:
Kernel Time CPU Ratio 2.4.19 200.43 60% 1.51 2.4.19 203.11 60% 1.53 2.4.19 203.97 59% 1.53 2.5.38-mm2 190.13 70% 1.43 2.5.38-mm2 194.06 69% 1.46 2.5.38-mm2 194.25 69% 1.46 2.5.38-mm2 194.42 69% 1.46 2.5.38-mm2 195.19 69% 1.47 2.5.38-mm2 207.36 64% 1.56 2.5.39 188.72 71% 1.42 2.5.39 190.44 70% 1.43 2.5.39 191.37 70% 1.44 2.5.39 191.48 70% 1.44 2.5.39 193.60 69% 1.45 2.5.39 199.50 67% 1.50
io_load:
Kernel Time CPU Ratio 2.4.19 486.58 27% 3.66 2.4.19 593.72 22% 4.46 2.4.19 637.61 21% 4.79 2.5.38-mm2 232.35 61% 1.75 2.5.38-mm2 237.83 57% 1.79 2.5.38-mm2 247.05 58% 1.86 2.5.38-mm2 274.39 50% 2.06 2.5.38-mm2 281.40 49% 2.11 2.5.38-mm2 295.87 47% 2.22 2.5.39 233.58 59% 1.76 2.5.39 242.98 57% 1.83 2.5.39 272.38 51% 2.05 2.5.39 294.52 50% 2.21 2.5.39 304.73 45% 2.29 2.5.39 328.01 42% 2.46
mem_load:
Kernel Time CPU Ratio 2.4.19 172.24 78% 1.29 2.4.19 174.74 77% 1.31 2.4.19 174.87 77% 1.31 2.5.38-mm2 165.53 82% 1.24 2.5.38-mm2 170.00 80% 1.28 2.5.38-mm2 170.89 79% 1.28 2.5.38-mm2 171.84 79% 1.29 2.5.38-mm2 171.96 79% 1.29 2.5.38-mm2 172.15 79% 1.29 2.5.39 167.92 81% 1.26 2.5.39 168.38 81% 1.27 2.5.39 170.16 80% 1.28 2.5.39 170.64 80% 1.28 2.5.39 170.80 80% 1.28 2.5.39 172.68 79% 1.30
Con, do you think is a good idea add the capability to the contest bechmark to provide an analisys of the results ? I have a few ideas, if you want we can contunue the discussion in pvt.
Ciao,
Paolo
Signature · 4 lines
Get your free email from www.linuxmail.org Powered by Outblaze