Skip to contentSkip to conversation

performance problems?

DISCUSSION Thomas List 8 participants 11 messages Nov 19, 2002 – Dec 16, 2002 5 messages not in the archive ACPI

lore
Share & tools
lore
#0 lore raw

Hi all,

I'm working on a small battery applet for my laptop that reads out the battery status. As I have up to now no better idea I'm pulling the battery status (/proc/acpi/battery/...) every few seconds (anyone an idea of how to do this better?). Now a battery applet should consume as few CPU cycles as possible to not use up the battery itself. So I'm trying to monitor how much computing time my applet is using. For the moment I'm doing this using top (I know this is not perfect for that task ...). Now to the problem:

After the laptop is running for some time the CPU% value in top is getting higher and higher. It starts with around 0.3% in the beginning, after one hour it reaches 1,5% and I had it up to 3% and more after a longer time. I am quite sure this is not my applet - I can stop the program and restart it and still get the higher values. I tried to watch a video in this state and while my program was running I had short stops in the video play back that match the 2 seconds interval of pulling the battery status. Without my program running the stops disappeared. Using a file system copy of /proc/acpi my program does not show at all on the top list.

I am using acpi 20021111 on a 2.4.20-rc1 kernel. The laptop is a Targa visionary 1600 from actebis (mobile athlon on a Via ProSavage KN133 "TwisterK" board). I think I did not have such problems with an older acpi version (20021022 ???) - I will check this out).

Now could this be a problem with the acpi implementation or is this the result of a wrong usage of acpi?

Btw. - is there any documentation on the /proc/acpi directories besides Dominik Brodowski's documentation for /proc/acpi/processor?

Thanks for any help,

Thomas

-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html

#1 lore raw

i'am using 2.4.19 + around october patch ( I'll check that this evening ) on sony vaio fx502

I've experienced the same problem with my personnal adaptation of wmacpi ..

when I fetch the /proc/acpi/<batteriesxxx>/state|info files, I get a 1-2 second freeze| lag ..

It might be linked with acpi as at this precise instant I can see some kacpid processes briefly created ..

Maybe the battery-status fetching lag is a hardware limitation ?

I'm not sure, but i think i didn't have this problem on pre-september patches ..

++

Quoted 37 lines · Thomas List

Hi all,

I'm working on a small battery applet for my laptop that reads out the battery status. As I have up to now no better idea I'm pulling the battery status (/proc/acpi/battery/...) every few seconds (anyone an idea of how to do this better?). Now a battery applet should consume as few CPU cycles as possible to not use up the battery itself. So I'm trying to monitor how much computing time my applet is using. For the moment I'm doing this using top (I know this is not perfect for that task ...). Now to the problem:

After the laptop is running for some time the CPU% value in top is getting higher and higher. It starts with around 0.3% in the beginning, after one hour it reaches 1,5% and I had it up to 3% and more after a longer time. I am quite sure this is not my applet - I can stop the program and restart it and still get the higher values. I tried to watch a video in this state and while my program was running I had short stops in the video play back that match the 2 seconds interval of pulling the battery status. Without my program running the stops disappeared. Using a file system copy of /proc/acpi my program does not show at all on the top list.

I am using acpi 20021111 on a 2.4.20-rc1 kernel. The laptop is a Targa visionary 1600 from actebis (mobile athlon on a Via ProSavage KN133 "TwisterK" board). I think I did not have such problems with an older acpi version (20021022 ???) - I will check this out).

Now could this be a problem with the acpi implementation or is this the result of a wrong usage of acpi?

Btw. - is there any documentation on the /proc/acpi directories besides Dominik Brodowski's documentation for /proc/acpi/processor?

Thanks for any help,

Thomas

Quoted 8 lines

-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html
_______________________________________________
Acpi-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-devel

--

+----------------------------------------------+
|Jaquemet Loic                                 |
|Intern in WesternGeco, Schlumberger in Gatwick|
|Phone: 44-(0)1293-55-6876                     |
|Eleve ingenieur en informatique FIIFO, ORSAY  |
+----------------------------------------------+

http://sourceforge.net/projects/ffss/
#wirelessfr @ irc.freenode.net

-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html

A message that is not in the archive (sent off-list or not yet received): 3DDA42A3.35F6BFE1-BNG0eM9rGRi0IRkH3yUr9EW4647UYGdYQQ4Iyu8u01E@public.gmane.org

#3 lore raw
Quoted 8 lines · Loic Jaquemet

i'am using 2.4.19 + around october patch ( I'll check that this evening ) on sony vaio fx502
[...]
when I fetch the /proc/acpi/<batteriesxxx>/state|info files, I get a 1-2 second freeze| lag ..
[...]
I'm not sure, but i think i didn't have this problem on pre-september patches ..

No, it has been present before. I have an FX405 and can't use any battery monitor applet that reads the info file. Even a 'cat /proc/acpi/battery/BAT1/info' causes a noticable peak in my cpu monitor (kernel time). At least, it doesn't freeze keyboard anymore, thanks to the ACPI people!

Markus

Signature · 11 lines
__________________    /"\
Markus Gaugusch       \ /    ASCII Ribbon Campaign
[email protected]     X     Against HTML Mail
                      / \



-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html

A message that is not in the archive (sent off-list or not yet received): Pine.LNX.4.44.0211191552030.31104-100000-sxQ525G0OhRQK2oVCIMtW7NldLUNz+W/@public.gmane.org

#5 lore raw
Quoted 9 lines · Markus Gaugusch
Quoted 8 lines · Loic Jaquemet

i'am using 2.4.19 + around october patch ( I'll check that this evening ) on sony vaio fx502
[...]
when I fetch the /proc/acpi/<batteriesxxx>/state|info files, I get a 1-2 second freeze| lag ..
[...]
I'm not sure, but i think i didn't have this problem on pre-september patches ..

Quoted 6 lines

No, it has been present before. I have an FX405 and can't use any battery monitor applet that reads the info file. Even a 'cat /proc/acpi/battery/BAT1/info' causes a noticable peak in my cpu monitor (kernel time). At least, it doesn't freeze keyboard anymore, thanks to the ACPI people!

You want to poll /proc/acpi/battery/BAT1/state or whatever is correct for your battery. Polling info requires interrupts with the BIOS I think, and state is there for a quick poll. At least on my machine this is the case.

Perhaps someone would want to clarify the difference and why info causes a hang and state does not.

Jamie Strandboge

Signature · 13 lines
Email:        [email protected]
GPG/PGP ID:   26384A3A
Fingerprint:  D9FF DF4A 2D46 A353 A289  E8F5 AA75 DCBE 2638 4A3A

Visit Perinton Nursery School at:
http://perintonnurseryschool.org/



-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html

A message that is not in the archive (sent off-list or not yet received): 1037721583.1432.12.camel-Ty44UuN9vPJ5T2F9fCU5s856D9/[email protected]

#7 lore raw
Quoted 17 lines · James D Strandboge
Quoted 9 lines · Markus Gaugusch
Quoted 8 lines · Loic Jaquemet

i'am using 2.4.19 + around october patch ( I'll check that this evening ) on sony vaio fx502
[...]
when I fetch the /proc/acpi/<batteriesxxx>/state|info files, I get a 1-2 second freeze| lag ..
[...]
I'm not sure, but i think i didn't have this problem on pre-september patches ..

Quoted 6 lines

No, it has been present before. I have an FX405 and can't use any battery monitor applet that reads the info file. Even a 'cat /proc/acpi/battery/BAT1/info' causes a noticable peak in my cpu monitor (kernel time). At least, it doesn't freeze keyboard anymore, thanks to the ACPI people!

Quoted 4 lines

You want to poll /proc/acpi/battery/BAT1/state or whatever is correct for your battery. Polling info requires interrupts with the BIOS I think, and state is there for a quick poll. At least on my machine this is the case.

Yes and not. In fact, the ASL code contains some Notification() methods, then kernel will inform user space via /proc/acpi/event.

Most of the time, those Notification() are generated by an interrupt (certainly an SCI).
You should see some Notification() to the battery(ies) in a \_GPE.[EL]xx(), or in a _Qxx() from an embedded controller in that case.

Quoted 3 lines

Perhaps someone would want to clarify the difference and why info causes a hang and state does not.

info give 'static' informations, as design capacity, last full technology, etc. It is 'huge', and do not need to be read often.

state give the actual remaining capacity of the battery, present voltage, and so on. It is 'small' and also hold the 'variable' part of the battery.

Now why cat'ing 'info' hang some systems is another problem (Should Not Happen (c)(tm))...

Signature · 9 lines
Ducrot Bruno
http://www.poupinou.org        Page profaissionelle
http://toto.tu-me-saoules.com  Haume page


-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html
#8 lore raw
In reply to a message not in the archive
Quoted 5 lines · James D Strandboge

You want to poll /proc/acpi/battery/BAT1/state or whatever is correct for your battery. Polling info requires interrupts with the BIOS I think, and state is there for a quick poll. At least on my machine this is the case.

Ah - OK, I am polling info and state at the moment. Let's see what happens if I skip info.

Thomas

-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html

#9 lore raw
In reply to a message not in the archive
Quoted 11 lines · Markus Gaugusch
Quoted 8 lines · Loic Jaquemet

i'am using 2.4.19 + around october patch ( I'll check that this evening ) on sony vaio fx502
[...]
when I fetch the /proc/acpi/<batteriesxxx>/state|info files, I get a 1-2 second freeze| lag ..
[...]
I'm not sure, but i think i didn't have this problem on pre-september patches ..

Quoted 5 lines

No, it has been present before. I have an FX405 and can't use any battery monitor applet that reads the info file. Even a 'cat /proc/acpi/battery/BAT1/info' causes a noticable peak in my cpu monitor (kernel time). At least, it doesn't freeze keyboard anymore, thanks to the ACPI people!

You can try my 'heatload'. Because I have an Sony, too, I have made a workaround for the 'info'-File. (I'm using an older ACPI-patch for kernel 2.4.18)

Greetings,

Malte

-------------------------------------------------------
This sf.net email is sponsored by:
With Great Power, Comes Great Responsibility Learn to use your power at OSDN's High Performance Computing Channel
http://hpc.devchannel.org/

A message that is not in the archive (sent off-list or not yet received): [email protected]

#11 lore raw
Quoted 1 line · On Tue, 19 Nov 2002 14:37:26 +0100 Thomas List…

Hi all,

Hello!

Quoted 8 lines

I'm working on a small battery applet for my laptop that reads out the battery status. As I have up to now no better idea I'm pulling the battery status (/proc/acpi/battery/...) every few seconds (anyone an idea of how to do this better?). Now a battery applet should consume as few CPU cycles as possible to not use up the battery itself. So I'm trying to monitor how much computing time my applet is using. For the moment I'm doing this using top (I know this is not perfect for that task ...). Now to the problem:

IMHO your assumption are coorect.

Quoted 10 lines

After the laptop is running for some time the CPU% value in top is getting higher and higher. It starts with around 0.3% in the beginning, after one hour it reaches 1,5% and I had it up to 3% and more after a longer time. I am quite sure this is not my applet - I can stop the program and restart it and still get the higher values. I tried to watch a video in this state and while my program was running I had short stops in the video play back that match the 2 seconds interval of pulling the battery status. Without my program running the stops disappeared. Using a file system copy of /proc/acpi my program does not show at all on the top list.

I cannot explain what you are observing but I can confirm your observations. I see the same "hangs" and CPU usage phenomenon when using a window-maker dock application showing battery information. Everytime the battery is polled by the applet the CPU usage rises and the machine suffers a short hang; approx. 1/4 second.

Quoted 4 lines

I am using acpi 20021111 on a 2.4.20-rc1 kernel. The laptop is a Targa visionary 1600 from actebis (mobile athlon on a Via ProSavage KN133 "TwisterK" board). I think I did not have such problems with an older acpi version (20021022 ???) - I will check this out).

Same here.
Laptop is Asus L3800C.

Quoted 2 lines

Now could this be a problem with the acpi implementation or is this the result of a wrong usage of acpi?

I think this is a problem with ACPI...

Quoted 2 lines

Btw. - is there any documentation on the /proc/acpi directories besides Dominik Brodowski's documentation for /proc/acpi/processor?

AFAIK not; but would be nice!

Quoted 2 lines

Thanks for any help,
Thomas

CU
nils faerber

Signature · 10 lines
kernel concepts          Tel: +49-271-771091-12
Dreisbachstr. 24         Fax: +49-271-771091-19
D-57250 Netphen          D1 : +49-170-2729106
--


-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html
#12 lore raw
In reply to a message not in the archive

Hi,

not sure about it, but have you any debug info on in ACPI ? Maybe, try to put debug info off (echo "0" > /proc/acpi/debug_level ), and see if that change anything.
I say that cause I used to have a lag due to debug info (which I must admit I put to a quite hight level, producing many data).

For the question about polling, it should be possible, according to specs (if I remember well, I'm not very sure) to have ACPI send an exception, thus catch it (with ospmd, acpid or whatever daemon you want) only when bat status changes. But for now, I have never been able to make my laptop work like this... But my compaq has such a buggy DSDT... And maybe probably harware bugs too (in interrupts lines)... That's bad cause software polling is never the right way to do such things here (temperature monitoring should not be polled either... In my DSDT, I have two functions, one which should be called when temp grows up, one for down. None of them is ever called.).

David Douard

Quoted 41 lines · Thomas List

Hi all,

I'm working on a small battery applet for my laptop that reads out the battery status. As I have up to now no better idea I'm pulling the battery status (/proc/acpi/battery/...) every few seconds (anyone an idea of how to do this better?). Now a battery applet should consume as few CPU cycles as possible to not use up the battery itself. So I'm trying to monitor how much computing time my applet is using. For the moment I'm doing this using top (I know this is not perfect for that task ...). Now to the problem:

After the laptop is running for some time the CPU% value in top is getting higher and higher. It starts with around 0.3% in the beginning, after one hour it reaches 1,5% and I had it up to 3% and more after a longer time. I am quite sure this is not my applet - I can stop the program and restart it and still get the higher values. I tried to watch a video in this state and while my program was running I had short stops in the video play back that match the 2 seconds interval of pulling the battery status. Without my program running the stops disappeared. Using a file system copy of /proc/acpi my program does not show at all on the top list.

I am using acpi 20021111 on a 2.4.20-rc1 kernel. The laptop is a Targa visionary 1600 from actebis (mobile athlon on a Via ProSavage KN133 "TwisterK" board). I think I did not have such problems with an older acpi version (20021022 ???) - I will check this out).

Now could this be a problem with the acpi implementation or is this the result of a wrong usage of acpi?

Btw. - is there any documentation on the /proc/acpi directories besides Dominik Brodowski's documentation for /proc/acpi/processor?

Thanks for any help,

Thomas

Quoted 8 lines

-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html
_______________________________________________
Acpi-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/acpi-devel

-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html

A message that is not in the archive (sent off-list or not yet received): [email protected]

#14 lore raw
Quoted 10 lines · David Douard

Hi,

not sure about it, but have you any debug info on in ACPI ? Maybe, try to put debug info off (echo "0" > /proc/acpi/debug_level ), and see if that change anything.
I say that cause I used to have a lag due to debug info (which I must admit I put to a quite hight level, producing many data).

For the question about polling, it should be possible, according to specs (if I remember well, I'm not very sure) to have ACPI send an exception, thus

It is called an 'event', but, well, the idea is here.

Quoted 1 line

catch it (with ospmd, acpid or whatever daemon you want) only when bat status

Yes. In fact, you shoud have something like that, when battery info change:

novae:~# cat /proc/acpi/event     
battery BAT1 00000080 00000001
battery BAT2 00000080 00000000

The /proc/acpi/event should be read actually by acpid or by ospmd, thus those events would be forwarded to an another user space program (as a battery status monitor). It would be more easy to have that via ospmd than with acpid.

In fact, ospmd abstract all this 'detail' for you, and you should have the current state of the battery(ies), without worrying about /proc files, by using libpower.

Signature · 9 lines
Ducrot Bruno
http://www.poupinou.org        Page profaissionelle
http://toto.tu-me-saoules.com  Haume page


-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html
#15 lore raw
In reply to a message not in the archive

Hi,

Quoted 12 lines · Ducrot Bruno
Quoted 3 lines · David Douard

catch it (with ospmd, acpid or whatever daemon you want) only when bat status

Yes. In fact, you shoud have something like that, when battery info change:

novae:~# cat /proc/acpi/event     battery BAT1 00000080 00000001
battery BAT2 00000080 00000000

OK, I will give it a try with ospmd and maybe the libpower included in the ospmd release. Unluckily I have never seen any event in /proc/acpi/event on my laptop so I'm not sure if it's not working at all or if it's just misconfigured.

Again, any hint for documentation (for example on /proc/acpi/event or ospmd) would be helpful ;)

Thomas

-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html