fix misspellings of 'exception'

diff -ruN linux-2.5.44/arch/m68k/lib/checksum.c linux/arch/m68k/lib/checksum.c
@@ -243,7 +243,7 @@
 	     "8:\n"
 		".section .fixup,\"ax\"\n"
 		".even\n"
-		/* If any execption occurs zero out the rest.
+		/* If any exception occurs zero out the rest.
 		   Similarities with the code above are intentional :-) */
 	     "90:\t"
 		"clrw %3@+\n\t"

diff -ruN linux-2.5.44/arch/ppc/boot/simple/rw4/ppc_40x.h linux/arch/ppc/boot/simple/rw4/ppc_40x.h
@@ -41,9 +41,9 @@
 #define dbsr            0x3f0               /* debug status register         */
 #define dccr            0x3fa               /* data cache control reg.       */
 #define dcwr            0x3ba               /* data cache write-thru reg     */
-#define dear            0x3d5               /* data exeption address reg     */
-#define esr             0x3d4               /* execption syndrome registe    */
-#define evpr            0x3d6               /* exeption vector prefix reg    */
+#define dear            0x3d5               /* data exception address reg    */
+#define esr             0x3d4               /* exception syndrome registe    */
+#define evpr            0x3d6               /* exception vector prefix reg   */
 #define iccr            0x3fb               /* instruction cache cntrl re    */
 #define icdbdr          0x3d3               /* instr cache dbug data reg     */
 #define lrreg           0x008               /* link register                 */

diff -ruN linux-2.5.44/drivers/acpi/namespace/nsxfobj.c linux/drivers/acpi/namespace/nsxfobj.c
@@ -141,7 +141,7 @@
 	*ret_handle =
 		acpi_ns_convert_entry_to_handle (acpi_ns_get_parent_node (node));
 
-	/* Return exeption if parent is null */
+	/* Return exception if parent is null */
 
 	if (!acpi_ns_get_parent_node (node)) {
 		status = AE_NULL_ENTRY;

diff -ruN linux-2.5.44/drivers/isdn/hardware/eicon/mi_pc.h linux/drivers/isdn/hardware/eicon/mi_pc.h
@@ -65,7 +65,7 @@
 #define _MP_LED1         0x04        /* 1 = on      */
 #define _MP_DSP_RESET    0x02        /* active lo   */
 #define _MP_RISC_RESET   0x81        /* active hi, bit 7 for compatibility with old boards */
-/* CPU exeption context structure in MP shared ram after trap */
+/* CPU exception context structure in MP shared ram after trap */
 typedef struct mp_xcptcontext_s MP_XCPTC;
 struct mp_xcptcontext_s {
     dword       sr;

diff -ruN linux-2.5.44/drivers/net/sk98lin/h/skgehw.h linux/drivers/net/sk98lin/h/skgehw.h
@@ -813,7 +813,7 @@
 									/* Bit 31..12:	reserved */
 #define	IS_IRQ_MST_ERR	(1L<<11)	/* Bit 11:	IRQ master error */
 									/*	PERR,RMABORT,RTABORT,DATAPERR */
-#define	IS_IRQ_STAT		(1L<<10)	/* Bit 10:	IRQ status execption */
+#define	IS_IRQ_STAT		(1L<<10)	/* Bit 10:	IRQ status exception */
 									/*	RMABORT, RTABORT, DATAPERR */
 #define IS_NO_STAT_M1	(1L<<9)		/* Bit	9:	No Rx Status from MAC1*/
 #define IS_NO_STAT_M2	(1L<<8)		/* Bit	8:	No Rx Status from MAC2*/

diff -ruN linux-2.5.44/drivers/net/skfp/h/skfbi.h linux/drivers/net/skfp/h/skfbi.h
@@ -1308,7 +1308,7 @@
 #define IS_I2C_READY	(1L<<27)	/* Bit 27: (ML)	IRQ on end of I2C tx */
 #define IS_IRQ_SW	(1L<<26)	/* Bit 26: (ML)	SW forced IRQ	     */
 #define IS_EXT_REG	(1L<<25)	/* Bit 25: (ML) IRQ from external reg*/
-#define	IS_IRQ_STAT	(1L<<24)	/* Bit 24:	IRQ status execption */
+#define	IS_IRQ_STAT	(1L<<24)	/* Bit 24:	IRQ status exception */
 					/*   PERR, RMABORT, RTABORT DATAPERR */
 #define	IS_IRQ_MST_ERR	(1L<<23)	/* Bit 23:	IRQ master error     */
 					/*   RMABORT, RTABORT, DATAPERR	     */

@@ -1360,7 +1360,7 @@
 #define IRQ_I2C_READY	(1L<<27)	/* Bit 27: (ML)	IRQ on end of I2C tx */
 #define IRQ_SW		(1L<<26)	/* Bit 26: (ML)	SW forced IRQ	     */
 #define IRQ_EXT_REG	(1L<<25)	/* Bit 25: (ML) IRQ from external reg*/
-#define	IRQ_STAT	(1L<<24)	/* Bit 24:	IRQ status execption */
+#define	IRQ_STAT	(1L<<24)	/* Bit 24:	IRQ status exception */
 					/*   PERR, RMABORT, RTABORT DATAPERR */
 #define	IRQ_MST_ERR	(1L<<23)	/* Bit 23:	IRQ master error     */
 					/*   RMABORT, RTABORT, DATAPERR	     */

diff -ruN linux-2.5.44/drivers/sbus/char/bpp.c linux/drivers/sbus/char/bpp.c
@@ -95,7 +95,7 @@
 /*
  * These are for data access.
  * Control lines accesses are hidden in set_bits() and get_bits().
- * The exeption is the probe procedure, which is system-dependent.
+ * The exception is the probe procedure, which is system-dependent.
  */
 #define bpp_outb_p(data, base)  outb_p((data), (base))
 #define bpp_inb(base)  inb(base)