Obvious(ish): 3c515 should work if ISAPNP is a module.
PATCH 1/1 Obvious(ish): 3c515 should work if ISAPNP is a module.
This is valid for at least 2.4.20 and earlier; it works for me, and I can't see any exceptional reason why it shouldn't work when ISAPNP is a module.
drivers/net/3c515.c 2002-08-03 18:24:05.000000000 +0100 renamed from drivers/net/3c515.c 2002-02-25 19:37:59.000000000 +0000 +4 -4
@@ -370,7 +370,7 @@ { "Default", 0, 0xFF, XCVR_10baseT, 10000}, }; -#ifdef CONFIG_ISAPNP +#if defined(CONFIG_ISAPNP) || defined (CONFIG_ISAPNP_MODULE) static struct isapnp_device_id corkscrew_isapnp_adapters[] = { { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051),
@@ -462,12 +462,12 @@ { int cards_found = 0; static int ioaddr; -#ifdef CONFIG_ISAPNP +#if defined(CONFIG_ISAPNP) || defined (CONFIG_ISAPNP_MODULE) short i; static int pnp_cards; #endif -#ifdef CONFIG_ISAPNP +#if defined(CONFIG_ISAPNP) || defined (CONFIG_ISAPNP_MODULE) if(nopnp == 1) goto no_pnp; for(i=0; corkscrew_isapnp_adapters[i].vendor != 0; i++) {
@@ -530,7 +530,7 @@ /* Check all locations on the ISA bus -- evil! */ for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x20) { int irq; -#ifdef CONFIG_ISAPNP +#if defined(CONFIG_ISAPNP) || defined (CONFIG_ISAPNP_MODULE) /* Make sure this was not already picked up by isapnp */ if(ioaddr == corkscrew_isapnp_phys_addr[0]) continue; if(ioaddr == corkscrew_isapnp_phys_addr[1]) continue;
Signature · 4 lines
_______________________________________________ Get your free email from http://mymail.operamail.com Powered by Outblaze
Quoted 7 lines · Matthew Bell
This is valid for at least 2.4.20 and earlier; it works for me, and I can't see any exceptional reason why it shouldn't work when ISAPNP is a module.
drivers/net/3c515.c 2002-08-03 18:24:05.000000000 +0100 line 376
Quoted 8 lines
drivers/net/3c515.c 2002-08-03 18:24:05.000000000 +0100 renamed from drivers/net/3c515.c 2002-02-25 19:37:59.000000000 +0000 +1
-1@@ -370,7 +370,7 @@ { "Default", 0, 0xFF, XCVR_10baseT, 10000}, }; -#ifdef CONFIG_ISAPNP +#if defined(CONFIG_ISAPNP) || defined (CONFIG_ISAPNP_MODULE) static struct isapnp_device_id corkscrew_isapnp_adapters[] = { { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051),
[...]
It's really only obvious*ish*: If isapnp is a module but 3c515 built-in, you'll get link errors. The real fix for this is to do
+#ifdef __ISAPNP__
which will get all cases right.
--Kai
Quoted 19 lines · Kai Germaschewski
Quoted 15 lines · Matthew Bell
This is valid for at least 2.4.20 and earlier; it works for me, and I can't see any exceptional reason why it shouldn't work when ISAPNP is a module.
drivers/net/3c515.c 2002-08-03 18:24:05.000000000 +0100 renamed from drivers/net/3c515.c 2002-02-25 19:37:59.000000000 +0000 +1
-1@@ -370,7 +370,7 @@ { "Default", 0, 0xFF, XCVR_10baseT, 10000}, }; -#ifdef CONFIG_ISAPNP +#if defined(CONFIG_ISAPNP) || defined (CONFIG_ISAPNP_MODULE) static struct isapnp_device_id corkscrew_isapnp_adapters[] = { { ISAPNP_ANY_ID, ISAPNP_ANY_ID, ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051),[...]
Quoted 6 lines
It's really only obvious*ish*: If isapnp is a module but 3c515 built-in, you'll get link errors. The real fix for this is to do
+#ifdef
__ISAPNP__which will get all cases right.
... but unfortunately thats currently going away ;) to make way for CONFIG_PNP
Zwane
Signature · 1 line
function.linuxpower.ca
Quoted 9 lines · Zwane Mwaikambo
Quoted 3 lines
+#ifdef
__ISAPNP__which will get all cases right.
... but unfortunately thats currently going away ;) to make way for
CONFIG_PNPZwane
Someone needs their coffee...
Signature · 1 line
function.linuxpower.ca