L2 Cache problem
Hi all,
My linux kernel did'nt detect my L2 cache on any of my two cpu ( this is an smp box ) here is the /proc/cpuinfo:
Therse processor are perfect Steping match SL3FJ( therse old katmai processor have 512k l2 cache ).
processor : 0vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 549.070
cache size : 32 KB
[...]
processor : 1vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 549.070
cache size : 32 KB
And I get nothing in my dmesg about l2 cache ( 'dmesg | grep L2' give nothing ) I'm on an plain vanilla kernel ( 2.4.18 taken at kernel.org ) with xfs-1.1 patch. At boot my bios say that my L2 of my two cpu are ok.
my dmesg will be online at http://paxl.no-ip.org/~paxl/dmesg.txt if somone mind.
Another fuzzy thing .. compiling my kernel normaly ( -j 1 ) take 30min and when I make it with -j 2/8/16 it take 25min, I think this is due to my L2 cache problem but that not normal, if somone have an idea.. I should be realy interested.
Another little detail that could help you, my mother board is an AMI MegaRUM II(that a dual p2/p3 mobo).
I hope somone will have an solution.
Thank you for your time
Xavier LaRue
On Monday 16 December 2002 19:30, Xavier LaRue wrote:
Hi Xavier,
Quoted 6 lines
My linux kernel did'nt detect my L2 cache on any of my two cpu ( this is an smp box ) here is the
/proc/cpuinfo: Therse processor are perfect Steping match SL3FJ( therse old katmai processor have 512k l2 cache ). And I get nothing in my dmesg about l2 cache ( 'dmesg | grep L2' give nothing ) I'm on an plain vanilla kernel ( 2.4.18 taken at kernel.org ) with xfs-1.1 patch. At boot my bios say that my L2 of my two cpu are ok.
This is fixed in 2.4.21-pre1. You have to upgrade or play with this patch:
http://linux.bkbits.net:8080/linux-2.4/[email protected]?nav=index.html|ChangeSet@-3w
I am afraid this will not apply clean ontop of 2.4.18.
ciao, Marc
Quoted 7 lines · Xavier LaRue
my dmesg will be online at http://paxl.no-ip.org/~paxl/dmesg.txt if somone mind.
Another fuzzy thing .. compiling my kernel normaly ( -j 1 ) take 30min and when I make it with -j 2/8/16 it take 25min, I think this is due to my L2 cache problem but that not normal, if somone have an idea.. I should be realy interested.
sounds like you've got your l2 turned off in the bios to me.
Mike
Quoted 6 lines · Mike Dresser
Quoted 5 lines
my dmesg will be online at http://paxl.no-ip.org/~paxl/dmesg.txt if somone mind. Another fuzzy thing .. compiling my kernel normaly ( -j 1 ) take 30min and when I make it with -j 2/8/16 it take 25min, I think this is due to my L2 cache problem but that not normal, if somone have an idea.. I should be realy interested.
sounds like you've got your l2 turned off in the bios to me.
2.4 right up until .21pre1 has a bug in the cache sizing routine. It should be fixed now.
Dave
Signature · 2 lines
| Dave Jones. http://www.codemonkey.org.uk | SuSE Labs
Quoted 11 lines · On Mon, 16 Dec 2002 13:56:09 -0500 (EST) Mike Dresser…
Quoted 7 lines · Xavier LaRue
my dmesg will be online at http://paxl.no-ip.org/~paxl/dmesg.txt if somone mind.
Another fuzzy thing .. compiling my kernel normaly ( -j 1 ) take 30min and when I make it with -j 2/8/16 it take 25min, I think this is due to my L2 cache problem but that not normal, if somone have an idea.. I should be realy interested.
sounds like you've got your l2 turned off in the bios to me.
There is no option in my bios to enable or disable L2 cache.. And at boot I get this
DSP Microcode OK ...... L2 512KB OK
AS#1 Microcode OK ...... L2 512KB OK
So I assume that the bios enable it, do there is a way to Force the kernel to use it even if he can't detect it ??
Thank you for your time and answer :)
Xavier LaRue