check_region remove for drivers/i2c/

@@ -160,19 +160,17 @@
  */
 static int iic_hw_resrc_init(void)
 {
-  	if (check_region(gpi.iic_base, ITE_IIC_IO_SIZE) < 0 ) {
-   	   return -ENODEV;
-  	} else {
-  	   request_region(gpi.iic_base, ITE_IIC_IO_SIZE, 
-		"i2c (i2c bus adapter)");
-  	}
-	if (gpi.iic_irq > 0) {
-	   if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0) {
-	      gpi.iic_irq = 0;
-	   } else
-	      DEB3(printk("Enabled IIC IRQ %d\n", gpi.iic_irq));
-	      enable_irq(gpi.iic_irq);
-	}
+	if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c"))
+		return -ENODEV;
+  
+	if (gpi.iic_irq <= 0)
+		return 0;
+
+	if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0)
+		gpi.iic_irq = 0;
+	else
+		enable_irq(gpi.iic_irq);
+
 	return 0;
 }
 

@@ -142,11 +142,11 @@
 static int pcf_isa_init(void)
 {
 	if (!mmapped) {
-		if (check_region(base, 2) < 0 ) {
-			printk(KERN_ERR "i2c-elektor.o: requested I/O region (0x%X:2) is in use.\n", base);
+		if (!request_region(base, 2, "i2c (isa bus adapter)"))
+			printk(KERN_ERR
+			       "i2c-elektor.o: requested I/O region (0x%X:2) "
+			       "is in use.\n", base);
 			return -ENODEV;
-		} else {
-			request_region(base, 2, "i2c (isa bus adapter)");
 		}
 	}
 	if (irq > 0) {

56 lines not on this page · raw message

@@ -96,8 +96,6 @@
 	return (i2c_bit_add_bus (&frodo_ops));
 }
 
-EXPORT_NO_SYMBOLS;
-
 static void __exit i2c_frodo_exit (void)
 {
 	i2c_bit_del_bus (&frodo_ops);

@@ -105,12 +103,7 @@
 
 MODULE_AUTHOR ("Abraham van der Merwe <[email protected]>");
 MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo");
-
-#ifdef MODULE_LICENSE
 MODULE_LICENSE ("GPL");
-#endif	/* #ifdef MODULE_LICENSE */
-
-EXPORT_NO_SYMBOLS;
 
 module_init (i2c_frodo_init);
 module_exit (i2c_frodo_exit);

@@ -297,14 +297,5 @@
 
 MODULE_PARM(type, "i");
 
-#ifdef MODULE
-int init_module(void)
-{
-	return i2c_bitlp_init();
-}
-
-void cleanup_module(void)
-{
-	i2c_bitlp_exit();
-}
-#endif
+module_init(i2c_bitlp_init);
+module_exit(i2c_bitlp_exit);

@@ -648,6 +643,7 @@
 					I2C_FUNC_SMBUS_QUICK)) return -1;
 
 	for (addr = 0x00; addr <= (is_isa ? 0xffff : 0x7f); addr++) {
+		/* XXX: WTF is going on here??? */
 		if ((is_isa && check_region(addr, 1)) ||
 		    (!is_isa && i2c_check_addr(adapter, addr)))
 			continue;