sym_glue.c file typo

DISCUSSION Kannan Soundarapandian 1 participant 2 messages Jan 5, 2003 – Jan 6, 2003 1 message not in the archive

lore

Share & tools

lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Kannan Soundarapandian

author

2003-01-05 08:54 UTC #1 lore raw

Hello all,

I'm having a problem with the sym53c8xx_2 driver.

I'm getting pretty much nowhere mucking around by myself. I don't know if I'm missing something very simple, but the sym53c8xx_2 driver (built into the kernel) seems to just completely ignore my onboard LSI 53C1010-33 controller.

It was working perfectly with the 2.4 series of kernels. My parameters are as follows:

Linux kernel : 2.5.53
Machine Specs: Dual P-III 1GHz SMP Motherboard : Asus CUR-DLS with Serverwrks LE chipset Controller chip: LSI 53C1010-33
HDD : Quantum Atlas 10K2

During Boot-up I get an error like so:

HBA driver sym53c8xx didn't set a release method, please fix the template

but looking at the source in hosts.c, this seems to be more of a warning than an error, since a default value is being set anyway.

Setting the boot time verbosity parameter to 2 (maximum) causes the configuration parameters to be echoed by the sym53c8xx driver during boot-up but nothing more.

I'm quite confused now. This driver used to work quite well with the 2.4 series kernels. Another thing is that doing a diff on the files sym_hipd.c in the 2.4.19 sources and the 2.5.53 sources shows the following:

diff sym_hipd.c ../../../../linux-2.5.53/drivers/scsi/sym53c8xx_2/sym_hipd.c 53c53
< #define SYM_DRIVER_NAME "sym-2.1.17a"
---

Quoted 1 line

#define SYM_DRIVER_NAME "sym-2.1.16a"

ie.. the newer kernel has the lower version number. IS this how its supposed to be? I did apply some patches (I lost track of which) a while ago to my 2.4.19 kernel though.. I don't know if that updated any drivers.

Anyways, can someone please point me to where I can find the latest version of this driver please? or let me know if any solution occurs to you. I'd be happy to furnish any other details.

Thanks a lot in advance. Kindly CC any replies to this address

Kannan

Quoted 29 lines · Kannan Soundarapandian

Hi,
There's a non-critical typo in the file sym_glue.c in the new 2.5 series kernels on line 2221. It says
                "verb:%d,debug:0x%x,setlle_delay:%d\n",
should be:
                "verb:%d,debug:0x%x,settle_delay:%d\n",
in file :
linux/drivers/scsi/sym53c8xx_2/sym_glue.c
I am having a lot of trouble getting my scsi card to be detected by the kernel. I am testing version 2.5.53 right now and have compiled in support for sym53c8xx_2, sd and generic scsi into the kernel.
During boot up the scsi driver shows signs of life when I use a verbosity level of 2 but doesn't seem to recognise my card. I am still trying out everything and anything. I will get back to you if I really hit the bottom.
fyi, My machine is a Dual processor P-III 1GHz machine with the Serverworks LE chipset. If you can think of anything please do let me know.
Thanks very much for your work and time :-) Great driver btw. It works perfectly with the 2.4 series kernels.
Signature · 11 lines
---------------------------------------------------------------
Kannan Soundarapandian, 
OSU, Corvallis, OR-97330.
---------------------------------------------------------------
SDF Public Access UNIX System - Powered by NetBSD 1.5!





~~~

Signature · 11 lines

---------------------------------------------------------------
Kannan Soundarapandian, 
OSU, Corvallis, OR-97330.
---------------------------------------------------------------
SDF Public Access UNIX System - Powered by NetBSD 1.5!





~~~

Kannan Soundarapandian

author

2003-01-06 02:43 UTC #2 lore raw

Hello all,

Sorry about the post without newlines. I'm reposting the message.

Kannan

Hello all,

I'm having a problem with the sym53c8xx_2 driver.

It was working perfectly with the 2.4 series of kernels. My parameters are as follows:

Linux kernel : 2.5.53
Machine Specs: Dual P-III 1GHz SMP Motherboard : Asus CUR-DLS with Serverwrks LE chipset Controller chip: LSI 53C1010-33
HDD : Quantum Atlas 10K2

During Boot-up I get an error like so:

HBA driver sym53c8xx didn't set a release method, please fix the template

but looking at the source in hosts.c, this seems to be more of a warning than an error, since a default value is being set anyway.

Setting the boot time verbosity parameter to 2 (maximum) causes the configuration parameters to be echoed by the sym53c8xx driver during boot-up but nothing more.

diff sym_hipd.c ../../../../linux-2.5.53/drivers/scsi/sym53c8xx_2/sym_hipd.c 53c53
< #define SYM_DRIVER_NAME "sym-2.1.17a"
---

Quoted 1 line

#define SYM_DRIVER_NAME "sym-2.1.16a"

Anyways, can someone please point me to where I can find the latest version of this driver please? or let me know if any solution occurs to you. I'd be happy to furnish any other details.

Thanks a lot in advance. Kindly CC any replies to this address

Kannan

Quoted 3 lines · Kannan Soundarapandian

Hi,
There's a non-critical typo in the file sym_glue.c in the new 2.5 series

kernels on line 2221. It says

Quoted 7 lines

                "verb:%d,debug:0x%x,setlle_delay:%d\n",
should be:
                "verb:%d,debug:0x%x,settle_delay:%d\n",
in file :
linux/drivers/scsi/sym53c8xx_2/sym_glue.c
I am having a lot of trouble getting my scsi card to be detected by the

kernel. I am testing version 2.5.53 right now and have compiled in support for sym53c8xx_2, sd and generic scsi into the kernel.

Quoted 2 lines

During boot up the scsi driver shows signs of life when I use a verbosity

level of 2 but doesn't seem to recognise my card. I am still trying out everything and anything. I will get back to you if I really hit the bottom.

Quoted 2 lines

fyi, My machine is a Dual processor P-III 1GHz machine with the Serverworks LE

chipset. If you can think of anything please do let me know.

Quoted 2 lines

Thanks very much for your work and time :-) Great driver btw. It works

perfectly with the 2.4 series kernels.

Quoted 12 lines

--
---------------------------------------------------------------
Kannan Soundarapandian,
OSU, Corvallis, OR-97330.
---------------------------------------------------------------
SDF Public Access UNIX System - Powered by NetBSD 1.5!

Quoted 1 line

~~~

--
---------------------------------------------------------------
Kannan Soundarapandian,
OSU, Corvallis, OR-97330.
---------------------------------------------------------------
SDF Public Access UNIX System - Powered by NetBSD 1.5!