Skip to contentSkip to conversation

port redirection *without* NAT

DISCUSSION Steve Benson 3 participants 3 messages Jan 6, 2003 – Jan 7, 2003

lore
Share & tools
lore
#0 lore raw

I'm trying to figure out how (if possible) to do port redirection with iptables on my linux router. This router is is not doing NAT, all connected networks have real, public IP addresses. There is tons of information out there about doing port redirection with NAT, but I can't find anything for without NAT. I just want to make the router take traffic destined for address A port x and change the destination address to send it off to address B port x instead. A and B are on the same (directly attached ethernet) network. I looked into the DNAT and REDIRECT targets, but those only seem to work in the nat table.

Thanks

#1 lore raw
Quoted 9 lines · Steve Benson

I'm trying to figure out how (if possible) to do port redirection with iptables on my linux router. This router is is not doing NAT, all connected networks have real, public IP addresses. There is tons of information out there about doing port redirection with NAT, but I can't find anything for without NAT. I just want to make the router take traffic destined for address A port x and change the destination address to send it off to address B port x instead. A and B are on the same (directly attached ethernet) network. I looked into the DNAT and REDIRECT targets, but those only seem to work in the nat table.

Didn't you already ask this and myself and someone else replied with
"yes you want DNAT".

Client C, router A, server B.

	C:x -> A:y
	DNAT port y -> B:z
	A passes through C:x -> B:z, and remembers this
	B replies from port z to C:x
	A Sees this, remembers and changes it back to A:y -> C:x
	voila, working two way TCP connection.

The other way, given you have all public IPs, is to forget rewriting, if you want the packets to be served by B:z then just damned well tell clients to connect there in the first place, then A just forwards packets backwards and forwards without changing anything.

C <---> Internet <---> eth0 A eth1 <----> B

On A:

iptables -A FORWARD -i eth0 -d B -j ACCEPT iptables -A FORWARD -i eth1 -s B -j ACCEPT

-Ath

Signature · 4 lines
- Athanasius = Athanasius(at)miggy.org / http://www.miggy.org/
                  Finger athan(at)fysh.org for PGP key
	   "And it's me who is my enemy. Me who beats me up.
Me who makes the monsters. Me who strips my confidence." Paula Cole - ME
#2 lore raw
Quoted 4 lines · Athan

Didn't you already ask this and myself and someone else replied with
"yes you want DNAT".

Yes. This was a duplicate message, sorry. I sent it to the list from the wrong address by mistake, and was informed it got put into a queue for the moderator to look at. I asked for it to be disregarded and then I posted again from the correct address, but I guess the original got passed to the list anyway. (oops, there goes my spam-free address into the archives :/).

I understand now that was I am describing is in fact NAT, it just didn't hit me at the time (duh). Sorry for the dupe, thanks for the help (Joel Newkirk too). Issue resolved.