[2.5.55][PATCH] SB16 convertation to new PnP layer - Didn't work :(
Quoted 1 line
From dmesg:
pnp: Calling quirk for 02:01.00
pnp: SB audio device quirk - increasing port range
pnp: Calling quirk for 02:01.02
pnp: AWE32 quirk - adding two ports
isapnp: No Plug & Play card found <-- this is WRONG
Advanced Linux Sound Architecture Driver Version 0.9.0rc6 (Tue Dec 17 19:01:13 2002 UTC).
pnp: the card driver 'opl3sa2' has been registered
pnp: the card driver 'sbawe' has been registered
pnp: pnp: match found with the PnP card '01:01' and the driver 'sbawe'
sbawe: isapnp configure failure (no device or busy)
ALSA device list:
No soundcards found.
ALSA cannot find this model of the SBAWE32
Information from /sys:
/sys/bus/pnp_card/devices/01:01:
Name: Creative SB32 PnP
02:01.00/:
Name: Audio
Possible: (Priority preferred)
Dependent: 01 - Priority preferred
port 0x220-0x220, align 0x0, size 0x10, 16-bit address decoding port 0x330-0x330, align 0x0, size 0x2, 16-bit address decoding port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding irq 5 High-Edge
dma 1 8-bit byte-count compatible
dma 5 16-bit word-count compatible
id: CTL0031
Resources: DISABLED
* NOTE: On this motherboard there is also a PnP ISA USRobotics modem which has a com port. When COM2 is enabled, this conflicts with the SBAWE32 IDE (which is known).
02:01.02/:
Name: WaveTable
Possible: (Priority preferred)
Dependent: 01 - Priority preferred
port 0x620-0x620, align 0x0, size 0x4, 16-bit address decoding port 0xa20-0xa20, align 0x0, size 0x4, 16-bit address decoding port 0xe20-0xe20, align 0x0, size 0x4, 16-bit address decoding
id: CTL0021
Resources: DISABLED
There are other components on this card such as the EIDE control but this broken right now ;-) they have been omitted from this email
Signature · 8 lines
Shawn Starr UNIX Systems Administrator, Operations Datawire Communication Networks Inc. 10 Carlson Court, Suite 300 Toronto, ON, M9W 6L2 T: 416-213-2001 ext 179 F: 416-213-2008 [email protected] "The power to Transact" - http://www.datawire.net