Nervous with 2.4.21-pre3 and -pre3-ac*
Quoted 4 lines
Are you using highmem (> 900Mb RAM in the box)
Alan
Yes, it's got 1 GB of ram in the box of P4 with i845G. in an ASUS P4PE motherboard.
BTW, After several segmentation faults from a few repeated tries of unsuccessful tar command, the machine got frozen.
Regards,
G. H. S>
Quoted 2 lines · ghugh Song
BTW, After several segmentation faults from a few repeated tries of unsuccessful tar command, the machine got frozen.
I had the same thing happen here using 2.4.21-pre3-ac2. cpio segfaulted and then the machine hung. I went back to 2.4.21-pre3 and all is well, so far.
PIII866, 256MB RAM
Bus 0, device 7, function 1:
IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 6).
Master Capable. Latency=32.
I/O at 0xd000 [0xd00f].
Signature · 1 line
L1: khromy ;khromy(at)lnuxlab.ath.cx
Quoted 9 lines · ghugh Song
Quoted 3 lines
Are you using highmem (> 900Mb RAM in the box)
Alan
Yes, it's got 1 GB of ram in the box of P4 with i845G. in an ASUS P4PE motherboard.
BTW, After several segmentation faults from a few repeated tries of unsuccessful tar command, the machine got frozen.
If you build a kernel with highmem disabled does it become stable ?