Skip to contentSkip to conversation

(3/3) i2c-isa, via686a and w8378x series sensors support for 2.5.58

PATCH New GertJan Spoelman 1 participant 1 message Jan 16, 2003

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 (3/3) i2c-isa, via686a and w8378x series sensors support for 2.5.58

This patch (3/3) adds /drivers/i2c/chips/w83781d.c and adds it to Kconfig and Makefile in the same dir, it depends on the second patch because of the changes in Kconfig and Makefile. Please apply.

drivers/i2c/chips/Kconfig +15 -0
diff -Nru linux-2.5.58/drivers/i2c/chips/Kconfig linux-2.5.58-edited/drivers/i2c/chips/Kconfig
@@ -51,4 +51,19 @@
 	  in the lm_sensors package, which you can download at 
 	  http://www.lm-sensors.nu
 
+config SENSORS_W83781D
+	tristate "  Winbond W83781D, W83782D, W83783S, W83627HF and Asus AS99127F"
+	depends on I2C && I2C_PROC && I2C_ISA
+	help
+	  If you say yes here you get support for the Winbond W8378x series
+	  of sensor chips: the W83781D, W83782D, W83783S, W83627HF and the
+	  similar Asus AS99127F. This can also be built as a module
+	  which can be inserted and removed while the kernel is running.
+
+	  The module will be called w83781d.ko.
+
+	  You will also need the latest user-space utilties: you can find them
+	  in the lm_sensors package, which you can download at 
+	  http://www.lm-sensors.nu
+
 endmenu
drivers/i2c/chips/Makefile +1 -0
diff -Nru linux-2.5.58/drivers/i2c/chips/Makefile linux-2.5.58-edited/drivers/i2c/chips/Makefile
@@ -5,3 +5,4 @@
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
 obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
+obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
drivers/i2c/chips/w83781d.c +2062 -0

2,062 lines not on this page · raw message