RAID5 reconfig
Quoted 9 lines
Use with extreme care:
http://unthought.net/raidreconf/index.shtmlSomeone posted a success story on this list a few weeks ago using a pretty big RAID5 volume/array.
Marco
PS: Please use the 'Subject' field.
Sorry about that.. Please CC me, I don't seem to be getting any feed from the list.
Thanks for the link. I've been reading up on others experiences and documentation seems somewhat thin. Does a mini-HOWTO exist anywhere? From what I've read, first raidreconf is used to change the array, then fsck -f is run to check the product, then the file system resize utility must be used to change the size of the filesystem on the RAID array. Then it would probably be a good idea to run fsck -f once more. This should be sufficient to add more disks to a RAID 5 array and enlarge the filesystem to take advantage of the larger block device. Am I missing anything?
Quoted 13 lines · TJ
Quoted 9 lines
Use with extreme care:
http://unthought.net/raidreconf/index.shtmlSomeone posted a success story on this list a few weeks ago using a pretty big RAID5 volume/array.
Marco
PS: Please use the 'Subject' field.
Sorry about that.. Please CC me, I don't seem to be getting any feed from the list.
Quoted 8 lines
Thanks for the link. I've been reading up on others experiences and documentation seems somewhat thin. Does a mini-HOWTO exist anywhere?
Quoted 1 line
From what I've read, first raidreconf is used to change the array, then
fsck -f is run to check the product, then the file system resize utility must be used to change the size of the filesystem on the RAID array. Then it would probably be a good idea to run fsck -f once more. This should be sufficient to add more disks to a RAID 5 array and enlarge the filesystem to take advantage of the larger block device. Am I missing anything?
Only that in some scenarios raidreconf fails horribly - this seems to at least happen if you have hot spares configured.
Make sure you have a good backup. Please report success/failure to the list - that is greatly appreciated :)
Signature · 10 lines
................................................................ : [email protected] : And I see the elder races, : :.........................: putrid forms of man : : Jakob Østergaard : See him rise and claim the earth, : : OZ9ABN : his downfall is at hand. : :.........................:............{Konkhra}...............: - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Well, raidreconfig worked wonderfully for me, however I screwed up afterwards. I fscked before resize2fs, but forgot to do it again afterwards and mounted the filesystem and used it. That caused it enough damage that I damaged it and rebuilt it from backups. Raidreconfig worked excellently. It handled unequal partition sizes just fine, though running it with the --test flag returned an error that one partition was too small (0kb).
One feature request:
Go from 4 40gb disks in RAID 5 to 3 80gb devices in RAID 5: 1 80 gb disk and the 4 40gb drives in RAID 0.
Old raidtab:
raiddev /dev/md0
raid-level 0
nr-raid-disks 2
chunk-size 64k
persistent-superblock 1
nr-spare-disks 0
device /dev/hda4
raid-disk 0
device /dev/hdc1
raid-disk 1
New raidtab:
raiddev /dev/md0
raid-level 5
nr-raid-disks 4
chunk-size 128k
persistent-superblock 1 parity-algorithm left-symmetric nr-spare-disks 0
device /dev/hda4
raid-disk 0
device /dev/hdb1
raid-disk 1
device /dev/hdc1
raid-disk 2
device /dev/hdd1
raid-disk 3
TJ on Sun 19/01 22:16 -0500:
Quoted 2 lines
I fscked before resize2fs, but forgot to do it again afterwards and mounted the filesystem and used it.
You should not have to. I have never used e2fsck after resize2fs and have never had a problem with perhaps a couple dozen resizes.