192khz working for anyone? and RME96 patch broke
First the RME thing: Torger's post-RC6 patch to rme96.c broke double-speed capture, so that there is nasty clipping/Nyquist-type garbage in it. This is definitely in the patch itself - a CVS kernel with an RC6 rme96.c works fine.
--
Now for the main attraction.
I'm looking for any way to get 192khz audio working. If anyone's gotten it working (under ALSA), I wanna hear how.
I tried Audigy 2 with no success. opensource.creative.com now has an Audigy 2 linux driver available, but I don't want to go back to that card, and I don't want to use a non-ALSA driver. Consumer cards are just painful, and Audigy 2 has no 192khz capture hardware, in any case.
My next try is the Envy24HT-based (ICE1724) ESI Waveterminal 192X. This is a pro card, much more appropriate for my purposes. It has 192khz capture and playback. The CVS ALSA kernel purports to have basic suppiort for ICE1724 now, but it's not working for me:
Bus 0, device 14, function 0:
Multimedia audio controller: PCI device 1412:1724 (IC Ensemble Inc) (rev 1).
IRQ 9.
Master Capable. Latency=64.
I/O at 0xef40 [0xef5f].
I/O at 0xec00 [0xec7f].but then
modprobe snd-ice1712 /lib/modules/2.4.18-xfs/kernel/sound/pci/ice1712/snd-ice1712.o: init_module: No such device
Any ideas? The vendor and device IDs match the 1724 stuff in ice1712.c, and not being an ALSA or Linux kernel savant, I don't have an intuition where to go from here.
I'm perfectly willing to send this card back and try another, if anyone has gotten 192khz ALSA working on it.
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
Quoted 4 lines · Daniel Pouzzner
First the RME thing: Torger's post-RC6 patch to
rme96.cbroke double-speed capture, so that there is nasty clipping/Nyquist-type garbage in it. This is definitely in the patch itself - a CVS kernel with an RC6rme96.cworks fine.
Strange, I did not touch that code specifically. Anyway, so you have tested with an old ALSA and the new driver (rme96.c) and that does not work?
Is it double speed capture from analog, or from digital input you are having problems with?
/Anders Torger
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
At Tue, 28 Jan 2003 00:27:34 -0500 (EST),
Quoted 5 lines · Daniel Pouzzner
I tried Audigy 2 with no success. opensource.creative.com now has an Audigy 2 linux driver available, but I don't want to go back to that card, and I don't want to use a non-ALSA driver. Consumer cards are just painful, and Audigy 2 has no 192khz capture hardware, in any case.
oss (and ALSA) drivers support audigy2 (and audigy1) only partially as emu10k1 compatible. that is, the maximal rate is up to 48k, anyway. btw, audigy2 is also supported by ALSA cvs (secretly, untested :)
Quoted 15 lines
My next try is the Envy24HT-based (ICE1724) ESI Waveterminal 192X. This is a pro card, much more appropriate for my purposes. It has 192khz capture and playback. The CVS ALSA kernel purports to have basic suppiort for ICE1724 now, but it's not working for me:
Bus 0, device 14, function 0:
Multimedia audio controller: PCI device 1412:1724 (IC Ensemble Inc) (rev 1). IRQ 9. Master Capable. Latency=64. I/O at 0xef40 [0xef5f]. I/O at 0xec00 [0xec7f].
Quoted 5 lines
but then
modprobe snd-ice1712
/lib/modules/2.4.18-xfs/kernel/sound/pci/ice1712/snd-ice1712.o:init_module: No such device
what is the kernel message?
but, i don't think the card will be working immediately because usually you need to write codes for ADC/DAC on the card.
ciao,
Takashi
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com