Skip to contentSkip to conversation

Switch APIC (+nmi, +oprofile) to driver model

PATCH Pavel Machek 2 participants 3 messages Feb 9, 2003

lore
Share & tools
lore
#0 lore raw

Hi!

Here's next attempt at moving APIC (+nmi, +oprofile) to the driver model. If it looks good I'l submit it to Linus.

Pavel

arch/i386/kernel/apic.c +61 -99
@@ -10,6 +10,7 @@
  *					for testing these extensively.
  *	Maciej W. Rozycki	:	Various updates and fixes.
  *	Mikael Pettersson	:	Power Management for UP-APIC.
+ *	Pavel Machek		:	Converted to driver model.
  */
 
 #include <linux/config.h>
@@ -23,6 +24,10 @@
 #include <linux/interrupt.h>
 #include <linux/mc146818rtc.h>
 #include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/pm.h>
 
 #include <asm/atomic.h>
 #include <asm/smp.h>
@@ -54,6 +59,8 @@
 int prof_old_multiplier[NR_CPUS] = { 1, };
 int prof_counter[NR_CPUS] = { 1, };
 
+unsigned long apic_phys;
+
 int get_maxlvt(void)
 {
 	unsigned int v, ver, maxlvt;
@@ -292,6 +299,27 @@
 	apic_write_around(APIC_LVT1, value);
 }
 
+static struct {
+	/* 'active' is true if the local APIC was enabled by us and
+	   not the BIOS; this signifies that we are also responsible
+	   for disabling it before entering apm/acpi suspend */
+	int active;
+	/* r/w apic fields */
+	unsigned int apic_id;
+	unsigned int apic_taskpri;
+	unsigned int apic_ldr;
+	unsigned int apic_dfr;
+	unsigned int apic_spiv;
+	unsigned int apic_lvtt;
+	unsigned int apic_lvtpc;
+	unsigned int apic_lvt0;
+	unsigned int apic_lvt1;
+	unsigned int apic_lvterr;
+	unsigned int apic_tmict;
+	unsigned int apic_tdcr;
+	unsigned int apic_thmr;
+} apic_pm_state;
+
 void __init setup_local_APIC (void)
 {
 	unsigned long value, ver, maxlvt;
@@ -435,44 +463,19 @@
 
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		setup_apic_nmi_watchdog();
+
+	apic_pm_state.active = 1;
 }
 
 #ifdef CONFIG_PM
-
-#include <linux/slab.h>
-#include <linux/pm.h>
-
-static struct {
-	/* 'active' is true if the local APIC was enabled by us and
-	   not the BIOS; this signifies that we are also responsible
-	   for disabling it before entering apm/acpi suspend */
-	int active;
-	/* 'perfctr_pmdev' is here because the current (2.4.1) PM
-	   callback system doesn't handle hierarchical dependencies */
-	struct pm_dev *perfctr_pmdev;
-	/* r/w apic fields */
-	unsigned int apic_id;
-	unsigned int apic_taskpri;
-	unsigned int apic_ldr;
-	unsigned int apic_dfr;
-	unsigned int apic_spiv;
-	unsigned int apic_lvtt;
-	unsigned int apic_lvtpc;
-	unsigned int apic_lvt0;
-	unsigned int apic_lvt1;
-	unsigned int apic_lvterr;
-	unsigned int apic_tmict;
-	unsigned int apic_tdcr;
-	unsigned int apic_thmr;
-} apic_pm_state;
-
-static void apic_pm_suspend(void *data)
+static int apic_suspend(struct device *dev, u32 state, u32 level)
 {
 	unsigned int l, h;
 	unsigned long flags;
 
-	if (apic_pm_state.perfctr_pmdev)
-		pm_send(apic_pm_state.perfctr_pmdev, PM_SUSPEND, data);
+	if (level != SUSPEND_DISABLE)
+		return 0;
+
 	apic_pm_state.apic_id = apic_read(APIC_ID);
 	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
 	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
@@ -493,13 +496,19 @@
 	l &= ~MSR_IA32_APICBASE_ENABLE;
 	wrmsr(MSR_IA32_APICBASE, l, h);
 	local_irq_restore(flags);
+	return 0;
 }
 
-static void apic_pm_resume(void *data)
+static int apic_resume(struct device *dev, u32 level)
 {
 	unsigned int l, h;
 	unsigned long flags;
 
+	if (level != RESUME_POWER_ON)
+		return 0;
+
+	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);		/* FIXME: this is needed for S3 resume, but why? */
+
 	local_irq_save(flags);
 	rdmsr(MSR_IA32_APICBASE, l, h);
 	l &= ~MSR_IA32_APICBASE_BASE;
@@ -524,74 +533,34 @@
 	apic_write(APIC_ESR, 0);
 	apic_read(APIC_ESR);
 	local_irq_restore(flags);
-	if (apic_pm_state.perfctr_pmdev)
-		pm_send(apic_pm_state.perfctr_pmdev, PM_RESUME, data);
-}
-
-static int apic_pm_callback(struct pm_dev *dev, pm_request_t rqst, void *data)
-{
-	switch (rqst) {
-	case PM_SUSPEND:
-		apic_pm_suspend(data);
-		break;
-	case PM_RESUME:
-		apic_pm_resume(data);
-		break;
-	}
 	return 0;
 }
 
-/* perfctr driver should call this instead of pm_register() */
-struct pm_dev *apic_pm_register(pm_dev_t type,
-				unsigned long id,
-				pm_callback callback)
-{
-	struct pm_dev *dev;
-
-	if (!apic_pm_state.active)
-		return pm_register(type, id, callback);
-	if (apic_pm_state.perfctr_pmdev)
-		return NULL;	/* we're busy */
-	dev = kmalloc(sizeof(struct pm_dev), GFP_KERNEL);
-	if (dev) {
-		memset(dev, 0, sizeof(*dev));
-		dev->type = type;
-		dev->id = id;
-		dev->callback = callback;
-		apic_pm_state.perfctr_pmdev = dev;
-	}
-	return dev;
-}
-
-/* perfctr driver should call this instead of pm_unregister() */
-void apic_pm_unregister(struct pm_dev *dev)
-{
-	if (!apic_pm_state.active) {
-		pm_unregister(dev);
-	} else if (dev == apic_pm_state.perfctr_pmdev) {
-		apic_pm_state.perfctr_pmdev = NULL;
-		kfree(dev);
-	}
-}
+static struct device_driver apic_driver = {
+	.name		= "apic",
+	.bus		= &system_bus_type,
+	.resume		= apic_resume,
+	.suspend	= apic_suspend,
+};
+
+struct sys_device device_apic = {
+	.name		= "apic",
+	.id		= 0,
+	.dev		= {
+		.name	= "APIC",
+		.driver	= &apic_driver,
+	},
+};
 
-static void __init apic_pm_init1(void)
-{
-	/* can't pm_register() at this early stage in the boot process
-	   (causes an immediate reboot), so just set the flag */
-	apic_pm_state.active = 1;
-}
-
-static void __init apic_pm_init2(void)
+static int __init init_apic_devicefs(void)
 {
+	driver_register(&apic_driver);
 	if (apic_pm_state.active)
-		pm_register(PM_SYS_DEV, 0, apic_pm_callback);
+		return sys_device_register(&device_apic);
+	return 0;
 }
 
-#else	/* CONFIG_PM */
-
-static inline void apic_pm_init1(void) { }
-static inline void apic_pm_init2(void) { }
-
+device_initcall(init_apic_devicefs);
 #endif	/* CONFIG_PM */
 
 /*
@@ -658,9 +627,6 @@
 		nmi_watchdog = NMI_LOCAL_APIC;
 
 	printk("Found and enabled local APIC!\n");
-
-	apic_pm_init1();
-
 	return 0;
 
 no_apic:
@@ -670,8 +636,6 @@
 
 void __init init_apic_mappings(void)
 {
-	unsigned long apic_phys;
-
 	/*
 	 * If no local APIC can be found then set up a fake all
 	 * zeroes page to simulate the local APIC and another
@@ -1141,8 +1105,6 @@
 	phys_cpu_present_map = 1;
 	apic_write_around(APIC_ID, boot_cpu_physical_apicid);
 
-	apic_pm_init2();
-
 	setup_local_APIC();
 
 	if (nmi_watchdog == NMI_LOCAL_APIC)
arch/i386/kernel/apm.c +9 -0
@@ -1263,6 +1263,11 @@
 		}
 		printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n");
 	}
+
+	device_suspend(3, SUSPEND_NOTIFY);
+	device_suspend(3, SUSPEND_SAVE_STATE);
+	device_suspend(3, SUSPEND_DISABLE);
+
 	/* serialize with the timer interrupt */
 	write_lock_irq(&xtime_lock);
 
@@ -1283,6 +1288,8 @@
 	if (err != APM_SUCCESS)
 		apm_error("suspend", err);
 	err = (err == APM_SUCCESS) ? 0 : -EIO;
+	device_resume(RESUME_RESTORE_STATE);
+	device_resume(RESUME_ENABLE);
 	pm_send_all(PM_RESUME, (void *)0);
 	queue_event(APM_NORMAL_RESUME, NULL);
  out:
@@ -1396,6 +1403,8 @@
 				write_lock_irq(&xtime_lock);
 				set_time();
 				write_unlock_irq(&xtime_lock);
+				device_resume(RESUME_RESTORE_STATE);
+				device_resume(RESUME_ENABLE);
 				pm_send_all(PM_RESUME, (void *)0);
 				queue_event(event, NULL);
 			}
arch/i386/kernel/i386_ksyms.c +0 -4
@@ -161,10 +161,6 @@
 EXPORT_SYMBOL(flush_tlb_page);
 #endif
 
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PM)
-EXPORT_SYMBOL_GPL(set_nmi_pm_callback);
-EXPORT_SYMBOL_GPL(unset_nmi_pm_callback);
-#endif
 #ifdef CONFIG_X86_IO_APIC
 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
 #endif
arch/i386/kernel/nmi.c +46 -39

149 lines not on this page · raw message

arch/i386/oprofile/nmi_int.c +59 -28

131 lines not on this page · raw message

include/asm-i386/apic.h +1 -0
@@ -95,6 +95,7 @@
 #define NMI_IO_APIC	1
 #define NMI_LOCAL_APIC	2
 #define NMI_INVALID	3
+#define NMI_LOCAL_APIC_SUSPENDED_BY_OPROFILE	4
 
 #endif /* CONFIG_X86_LOCAL_APIC */
 
Signature · 2 lines
Worst form of spam? Adding advertisment signatures ala sourceforge.net.
What goes next? Inserting advertisment *into* email?
#1 lore raw

arch/i386/oprofile/nmi_int.c line 181

Quoted 2 lines · Pavel Machek
arch/i386/oprofile/nmi_int.c +2 -0
+	if (nmi_watchdog == NMI_LOCAL_APIC_SUSPENDED_BY_OPROFILE) {
+		nmi_watchdog = NMI_LOCAL_APIC_SUSPENDED_BY_OPROFILE;

This is obviously wrong...

#2 lore raw
In reply to Pavel Machek

arch/i386/oprofile/nmi_int.c line 183

Quoted 11 lines · Pavel Machek

static void nmi_shutdown(void)
{

arch/i386/oprofile/nmi_int.c +5 -1
-	unset_nmi_pm_callback(oprofile_pmdev);
+	nmi_enabled = 0;
 	unset_nmi_callback();
 	smp_call_function(nmi_cpu_shutdown, NULL, 0, 1);
 	nmi_cpu_shutdown(0);
+	if (nmi_watchdog == NMI_LOCAL_APIC_SUSPENDED_BY_OPROFILE) {
+		nmi_watchdog = NMI_LOCAL_APIC_SUSPENDED_BY_OPROFILE;
+		setup_apic_nmi_watchdog();
+	}

It looks to me like you'll end up enabilng the watchdog even if user didn't enable the watchdog at boot up. Also, setup_apic_nmi_watchdog() and the disable function need to exported to modules.

john