Skip to contentSkip to conversation

File systems in embedded devices

DISCUSSION Nandakumar NarayanaSwamy 2 participants 2 messages Feb 10, 2003

lore
Share & tools
lore
#0 lore raw

Dear David,

Thanks for your response.

I sent it correctly after typing the full mail. I think this is some problem in rediff mails itself. Anyway these are the my requirements:

1) My application is coming around 8 MB. So need a file system about 12 MB to which i should be able to mount the root of the Linux kernel.

2) I need read-only file system.

3) Is it possible to create multiple ram disks of multiple file systems like CRAMFS, RAMDISK for a single kernel?

Thanks in advance,
Nanda

Quoted 23 lines · On Sun, 09 Feb 2003 David Woodhouse wrote :
Quoted 3 lines · Nandakumar NarayanaSwamy

Dear All,

We are developing a embedded device based on linux. Through

the

Quoted 2 lines

development phase we used NFS. But now we want to move some filesystem which can be created in FLASH/RAM.

Which? Flash or RAM?

Quoted 2 lines

Can anybody suggest me some ideas so that i can solve these issues?

You need to give at least _some_ indication of your requirements --
what's on your file system, what is the expected pattern of access to it, do you require write access all the time or only occasional updates of the whole system, etc. ?

--
dwmw2

#1 lore raw
Quoted 2 lines · Nandakumar NarayanaSwamy

I sent it correctly after typing the full mail. I think this is some problem in rediff mails itself.

No, I was being sarcastic. There's no text below your quotation in this mail from you either. It's all at the top. Please don't do that.

You are still violating
http://www.infradead.org/~dwmw2/email.html#references
http://www.infradead.org/~dwmw2/email.html#top-posting
http://www.infradead.org/~dwmw2/email.html#quote-selectively
and probably also to a certain extent
http://www.infradead.org/~dwmw2/email.html#include

Quoted 7 lines

Anyway these are the my requirements:

1) My application is coming around 8 MB. So need a file system about 12 MB to which i should be able to mount the root of the Linux kernel.

2) I need read-only file system.

If you really only need it to be read-only, and assuming NOR flash, then cramfs on a flash device sounds like a sane option. If you have NAND flash then it's slightly more complicated -- you probably need a real writable file system which deals with NAND but you could use it in read-only mode.

Quoted 2 lines

3) Is it possible to create multiple ram disks of multiple file systems like CRAMFS, RAMDISK for a single kernel?

Why? Where would these ramdisks be loaded from in the first place? Wouldn't you do better to use them directly from there rather than copying them into precious RAM?

Signature · 1 line
dwmw2