OSS Sound Blaster sb_card.c rewrite (PnP, module options, etc) - Failed
Quoted 3 lines
Shawn, do you have "PNP Bios" enabled? If you turn it off does the resource conflict go away (this happened to me before and then stopped for reasons unknown to me).
Yes, It's enabled. I can disable it and see if it works or not. But I had weird irq/resource errors with it off (?). Not enough resources / irqs when I initially put the cards into the box (I don't know if this is because PnP BIOS was off or not). But I'll find out tonight for you.
Shawn.
Quoted 129 lines
Shawn, Adam,
Yes. Failing here is certainly not the right thing to do. The soundblaster only needs 4 bytes at
0x388, which brings it from0x388to0x38b, not in conflict with the ttyS0 that starts at0x3f8.Furthermore the soundblaster has other configurations at "priority acceptable" with and without the OPL (0x388-0x3f8, 4 bytes).
Here are examples for the two cards I have in my system now:
# CTL0045, AWE64
Hal9000:/dev/sysfs/bus/pnp/devices/01:01.00# cat possible Dependent: 01 - Priority preferred port 0x220-0x220, align 0x0, size 0x10, 16-bit address decoding port 0x330-0x330, align 0x0, size 0x2, 16-bit address decoding port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding irq 5 High-Edge dma 1 8-bit byte-count compatible dma 5 16-bit word-count compatible Dependent: 02 - Priority acceptable port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding irq 5,7,2/9,10 High-Edge dma 0,1,3 8-bit byte-count compatible dma 5,6,7 16-bit word-count compatible Dependent: 03 - Priority acceptable port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding irq 5,7,2/9,10 High-Edge dma 0,1,3 8-bit byte-count compatible dma 5,6,7 16-bit word-count compatible Dependent: 04 - Priority acceptable port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding irq 5,7,2/9,10 High-Edge dma 0,1,3 8-bit byte-count compatible dma 5,6,7 16-bit word-count compatible Dependent: 05 - Priority acceptable port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding irq 5,7,2/9,10 High-Edge dma 0,1,3 8-bit byte-count compatible Dependent: 06 - Priority acceptable port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding irq 5,7,2/9,10 High-Edge dma 0,1,3 8-bit byte-count compatible Dependent: 07 - Priority acceptable port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding irq 5,7,2/9,10 High-Edge dma 0,1,3 8-bit byte-count compatible Dependent: 08 - Priority functional port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding port 0x388-0x394, align 0x3, size 0x4, 16-bit address decoding irq 5,7,2/9,10 High-Edge dma 0,1,3 8-bit byte-count compatible dma 5,6,7 16-bit word-count compatibleHal9000:/dev/sysfs/bus/pnp/devices/01:01.00# cat resources io 0x220-0x22f io 0x330-0x331 io 0x388-0x38b irq 5 dma 1 dma 5# CTL0031, AWE32
Hal9000:/dev/sysfs/bus/pnp/devices/01:02.00# cat possible Dependent: 01 - Priority preferred port 0x220-0x220, align 0x0, size 0x10, 16-bit address decoding port 0x330-0x330, align 0x0, size 0x2, 16-bit address decoding port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding irq 5 High-Edge dma 1 8-bit byte-count compatible dma 5 16-bit word-count compatible Dependent: 02 - Priority acceptable port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding irq 5,7,10 High-Edge dma 0,1,3 8-bit byte-count compatible dma 5,6,7 16-bit word-count compatible Dependent: 03 - Priority acceptable port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding irq 5,7,10 High-Edge dma 0,1,3 8-bit byte-count compatible dma 5,6,7 16-bit word-count compatible Dependent: 04 - Priority functional port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding irq 5,7,10 High-Edge dma 0,1,3 8-bit byte-count compatible dma 5,6,7 16-bit word-count compatible Dependent: 05 - Priority functional port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding port 0x388-0x3f8, align 0x0, size 0x4, 16-bit address decoding irq 5,7,10 High-Edge dma 0,1,3 8-bit byte-count compatible Dependent: 06 - Priority functional port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding irq 5,7,10 High-Edge dma 0,1,3 8-bit byte-count compatible Dependent: 07 - Priority functional port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding irq 5,7,10,11 High-Edge dma 0,1,3 8-bit byte-count compatibleHal9000:/dev/sysfs/bus/pnp/devices/01:02.00# cat resources io 0x240-0x24f io 0x300-0x301 io 0x38c-0x38f irq 10 dma 3 dma 6So you can see that the second card is configured correctly with OPL IO address at 0x38c-0x38f, because the first card took 0x388-0x38b.
Adam, any insight as to what is causing Shawn's resource conflict or why PNP isn't dropping to some priority where the OPL is not enabled?
Thanks,
Paul
Quoted 11 lines · Shawn Starr
pnp: Calling quirk for 01:01.00
pnp: SB audio device quirk - increasing port range
pnp: Calling quirk for 01:01.02
pnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB32 PnP'
isapnp: Card 'U.S. Robotics Sportster 33600 FAX/Voice Int'
isapnp: 2 Plug & Play cards detected totalsb: Init: Starting Probe...
pnp: the card driver 'OSS SndBlstr' has been registered
pnp: pnp: match found with the PnP card '01:01' and the driver 'OSS
SndBlstr'
Quoted 10 lines
pnp: Automatic configuration failed for device '01:01.00' due to resource conflicts
sb: Init: Done01:01.00 = Creative SB32 PnP
id = CTL0031Conflicted by: 03f8-03ff : serial
ttyS0 at I/O0x3f8(irq = 4) is a 16550A
Quoted 6 lines
from 01:01.00/possible:
Dependent: 01 - Priority preferred
port 0x220-0x220, align0x0, size0x10, 16-bit address decoding port 0x330-0x330, align0x0, size0x2, 16-bit address decoding port 0x388-0x3f8, align0x0, size0x4, 16-bit address decoding
<----------
Quoted 4 lines
irq 5 High-Edge
dma 1 8-bit byte-count compatible
dma 5 16-bit word-count compatible
Quoted 16 lines
Adam is working on resource conflict fixes to PnP to let us see and possibly fix conflicts like this.
Shawn.
Quoted 9 lines · Paul Laufer
Sorry, I sent a version of
sb_card.cthat was what I last minute tested minus one change. The #include forsb_card.hshould be under the #include ofpnp.h. Here is the patch. It should work after you apply this.Thanks for testing.
Paul
-
Signature · 8 lines
Shawn Starr UNIX Systems Administrator, Operations Datawire Communication Networks Inc. 10 Carlson Court, Suite 300 Toronto, ON, M9W 6L2 T: 416-213-2001 ext 179 F: 416-213-2008 [email protected] "The power to Transact" - http://www.datawire.net