remove eata_dma driver

@@ -471,10 +471,6 @@
 	  SCSI-HOWTO, available from
 	  <http://www.linuxdoc.org/docs.html#howto>.
 
-	  Note that there is also another driver for the same hardware
-	  available: "EATA-DMA [Obsolete] (DPT, NEC, AT&T, SNI, AST, Olivetti,
-	  Alphatronix) support". You should say Y to only one of them.
-
 	  If you want to compile this as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want),
 	  say M here and read <file:Documentation/modules.txt>.  The module

@@ -511,24 +507,6 @@
 	  used by the elevator sorting option above. The effective value used
 	  by the driver for each probed SCSI device is reported at boot time.
 	  This is equivalent to the "eata=mq:8" boot option.
-
-config SCSI_EATA_DMA
-	tristate "EATA-DMA [Obsolete] (DPT, NEC, AT&T, SNI, AST, Olivetti, Alphatronix) support"
-	depends on SCSI
-	---help---
-	  This is support for the EATA-DMA protocol compliant SCSI Host
-	  Adapters like the SmartCache III/IV, SmartRAID controller families
-	  and the DPT PM2011B and PM2012B controllers.
-
-	  Note that this driver is obsolete; if you have one of the above
-	  SCSI Host Adapters, you should normally say N here and Y to "EATA
-	  ISA/EISA/PCI support", below.  Please read the SCSI-HOWTO, available
-	  from <http://www.linuxdoc.org/docs.html#howto>.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want).
-	  The module will be called eata_dma.  If you want to compile it as
-	  a module, say M here and read <file:Documentation/modules.txt>.
 
 config SCSI_EATA_PIO
 	tristate "EATA-PIO (old DPT PM2001, PM2012A) support"

@@ -82,7 +82,6 @@
 obj-$(CONFIG_SCSI_SYM53C8XX)	+= sym53c8xx.o 
 obj-$(CONFIG_SCSI_NCR53C8XX)	+= ncr53c8xx.o 
 obj-$(CONFIG_SCSI_ZALON)	+= zalon7xx.o
-obj-$(CONFIG_SCSI_EATA_DMA)	+= eata_dma.o
 obj-$(CONFIG_SCSI_EATA_PIO)	+= eata_pio.o
 obj-$(CONFIG_SCSI_7000FASST)	+= wd7000.o
 obj-$(CONFIG_SCSI_MCA_53C9X)	+= NCR53C9x.o	mca_53c9x.o