Problems with hyper-threading on Asus P4T533 / Linux 2.4.20
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Ursprüngliche Nachricht <<<<<<<<<<<<<<<<<<
Am 12.02.03, 15:12:29, schrieb Lars Magne Ingebrigtsen <[email protected]> zum Thema Problems with hyper-threading on Asus P4T533 / Linux 2.4.20:
Quoted 6 lines
We've just gotten an Asus P4T533-based machine with a 3.06GHz P4 CPU, bios version 1005. (P4T533 is i850e-based.) The bios claims that the P4 has hyper-threading, and as you can see from the cpuinfo output below, "ht" is among the flags. (And the manual says that P4T533 is ht-enabled.)
Quoted 6 lines
I've tried booting with acpismp=force and without, and it doesn't seem to make much difference: Linux still only sees a single CPU. I've also tried 2.4.21-pre4 and -ac4, which doesn't seem to make any difference, either.
Anybody got any ideas why I can't get this to work?
[...]
I know some other Asus Boards that only work in HT mode when you're using ACPI Patches from
http://sourceforge.net/project/showfiles.php?group_id=36832
But I don't know why -- Maybe someone else knows why?
CU
Thorsten Leemhuis
Quoted 4 lines · Thorsten Leemhuis
I know some other Asus Boards that only work in HT mode when you're using ACPI Patches from
Thanks! That solves the problem for me. /proc/cpuinfo now shows two CPUs.
Signature · 2 lines
(domestic pets only, the antidote for overdose, milk.) [email protected] * Lars Magne Ingebrigtsen