printk() without KERN_ prefixes? (in 2.5.59) and Q: small kernel image doc
Hello everybody,
until now I believed that all printk()'s should have a KERN_ prefix - but to my surprise it ain't so:
grep printk -r . | grep -v "KERN_" | wc -l 29932 grep printk -r . | grep -v "KERN_" | cut -d: -f1 | uniq | wc -l 2636
so there are ~ 30 000 printk() lines in 2600 files which don't have such a specifier.
Should they be fixed to KERN_INFO or some such? I'm willing to contribute a patch (which will be done by script, of course). Or am I missing something and they shall stay as they are?
I'm looking at this part as I'm trying to get a smaller kernel image, as my boot media (1.44 MB disk :-( is getting full (yes I know that there's a lot I can do about userspace too :-) and so I'm thinking about dropping all KERN_DEBUG, maybe KERN_INFO and possible KERN_NOTICE to save some space. I remember having read some ideas (and possibly a web reference) on lkml in mid-2002 but couldn't find them yet.
Anyway, are there some other resources on the web for building small kernel's? (that is, small kernel images, not for use in small machines). I already searched a bit and found some sites (mulinux, superant/smalllinux, linuxrouter, linux embedding, small unix, ...)
I know that I could use an older kernel (2.0 or 2.2) but because of driver maturity (ie. workarounds for bugs in recent hardware) and performance I'd like to use current kernels.
Regards,
Phil
PS: Highlights are below (more than 100 occurances)
102 ./drivers/scsi/qlogicfc.c
103 ./drivers/block/floppy.c
104 ./drivers/atm/idt77252.c
104 ./drivers/cdrom/sjcd.c
106 ./drivers/char/rio/rioinit.c
107 ./net/atm/mpc.c
109 ./drivers/message/i2o/i2o_core.c
110 ./drivers/char/stallion.c
114 ./drivers/sbus/char/aurora.c
114 ./drivers/cdrom/aztcd.c
116 ./drivers/char/pcmcia/synclink_cs.c
117 ./drivers/char/serial167.c
122 ./drivers/scsi/AM53C974.c
130 ./drivers/message/fusion/mptbase.c
136 ./drivers/char/synclinkmp.c
142 ./drivers/char/synclink.c
144 ./drivers/message/fusion/mptscsih.c
145 ./drivers/scsi/ncr53c8xx.c
147 ./arch/ia64/kernel/perfmon.c
149 ./drivers/scsi/sym53c8xx.c
154 ./drivers/net/hp100.c
164 ./sound/oss/cs46xx.c
166 ./drivers/atm/iphase.c
180 ./drivers/scsi/aha152x.c
184 ./drivers/char/cyclades.c
184 ./drivers/char/rio/rioctrl.c
204 ./drivers/scsi/53c7xx.c
206 ./drivers/scsi/osst.c
208 ./drivers/scsi/53c7,8xx.c
217 ./drivers/scsi/qla1280.c
221 ./drivers/scsi/cpqfcTSworker.c
229 ./fs/jffs/intrep.c
230 ./drivers/scsi/aic7xxx_old.c
253 ./crypto/tcrypt.cQuoted 3 lines · Ph. Marek
Should they be fixed to
KERN_INFOor some such? I'm willing to contribute a patch (which will be done by script, of course). Or am I missing something and they shall stay as they are?
Do not blindly add KERN_*. Some prints are done with multiple calls to printk(), only the first call should have KERN_*, otherwise you get lines like this, with embedded '<n>' strings.
/dev/xscsi/pci01.00.0-1/target0/lun0:<6> p1<6> p2<6> p3<6> p4 <<6> p5<6> p6<6> p7 >
[PATCH available] Re: printk() without KERN_ prefixes? (in 2.5.59)
Quoted 7 lines
Quoted 3 lines
Should they be fixed to
KERN_INFOor some such? I'm willing to contribute a patch (which will be done by script, of course). Or am I missing something and they shall stay as they are?Do not blindly add KERN_*. Some prints are done with multiple calls to
printk(), only the first call should have KERN_*, otherwise you get lines like this, with embedded '<n>' strings.
Well, I wrote a perl-script (available on request) which searches for missing KERN_ values.
It does this by reading filenames from STDIN, reading the files, extracting every function from there and checking if after \n is a KERN_-value (assuming that every function starts from a fresh line). If there is one missing, KERN_DEBUG is inserted.
my simple script was unable to do some files in the arch/ia64 tree and some others because using #if with mis-aligned { and }. example from sound/isa/opti9xx/opti92x-ad1848.c
#ifdef __ISAPNP__
if (isapnp && (hw = snd_card_opti9xx_isapnp(chip)) > 0) {
...
} else {
#endif /* __ISAPNP__ */
...
#ifdef __ISAPNP__
}
#endif /* __ISAPNP__ */and it just doesn't check such constructs.
Furthermore it destroys some files (don't know why atm), but these are manually excluded from the patch, which is 3933078 bytes (bzipped2 699170).
This patch has NOT all occurances fixed!
from diffstat:
1908 files changed, 13568 insertions(+), 13567 deletions(-)
So I think it not really useful to just post this patch to the list.
I think I'll cut it at subdirectory levels in pieces (ie arch/ia64, arch/i386, drivers/net, drivers/scsi ...).
I should have them available some time monday for the interested.
Comments?
Regards,
Phil
PATCH 1/1 printk() without KERN_ prefixes for 2.5.60
In reply to Keith OwensI've again generated a patch which changes printk() without KERN_ prefixes to include these.
It is available upon request; diffstat appended.
summary:
1922 files changed, 13863 insertions(+), 13862 deletions(-)
Regards,
Phil