Skip to contentSkip to conversation

2.5.60/atyfb

DISCUSSION Nico Schottelius 3 participants 3 messages Feb 17, 2003 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

Hello!

I retried using atyfb with 2.5.60:
Afterloading atyfb the only thing left is the cursor.
i don't see anything else anymore..i see the cursor moving, but that's all. btw, i am using a laptop (means lcd)...

can somebody tell me whether playing around with fbset could make things working?

Nico

lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage P/M Mobility AGP 2x (rev 64)

dmesg:
atyfb: 3D RAGE Mobility (PCI) [0x4c4d rev 0x64] 8M SDRAM, 29.498928 MHz XTAL, 230 MHz PLL, 50 Mhz MCLK
fb0: ATY Mach64 frame buffer device on PCI

flapp:~ # fbset -fb /dev/fb/0

mode "640x480-60"

    # D: 25.075 MHz, H: 31.343 kHz, V: 59.701 Hz
    geometry 640 480 640 13075 8
    timings 39881 48 16 33 10 96 2
    accel true
    rgba 8/0,8/0,8/0,0/0

endmode

flapp:~ # fbset -fb /dev/fb/0 -xres 1024 -yres 768 dmesg:
not enough video RAM

flapp:~ # fbset -fb /dev/fb/0 -xres 800 -yres 600
dmesg:
not enough video RAM

Signature · 3 lines
Please send your messages pgp-signed and/or pgp-encrypted (don't encrypt mails
to mailing list!). If you don't know what pgp is visit www.gnupg.org.
(public pgp key: ftp.schottelius.org/pub/familiy/nico/pgp-key)
#1 lore raw
Quoted 8 lines · Nico Schottelius

I retried using atyfb with 2.5.60:
Afterloading atyfb the only thing left is the cursor.
i don't see anything else anymore..i see the cursor moving, but that's all. btw, i am using a laptop (means lcd)...

can somebody tell me whether playing around with fbset could make things working?

Quoted 8 lines

Nico

lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage P/M Mobility AGP 2x (rev 64)

dmesg:
atyfb: 3D RAGE Mobility (PCI) [0x4c4d rev 0x64] 8M SDRAM, 29.498928 MHz XTAL, 230 MHz PLL, 50 Mhz MCLK
fb0: ATY Mach64 frame buffer device on PCI

Did older versions of atyfb work on this chip? I have the same one in my Vaio, and so far it never worked with atyfb.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw
In reply to Nico Schottelius
Quoted 7 lines · Nico Schottelius

Hello!

I retried using atyfb with 2.5.60:
Afterloading atyfb the only thing left is the cursor.
i don't see anything else anymore..i see the cursor moving, but that's all. btw, i am using a laptop (means lcd)...

Strange. The good news is, if you see the cursor, it means the drawing functions is working since atyfb uses soft_cursor() which uses xxxfb_imageblit (the same function to draw the characters). That is perhaps fixable.

Quoted 3 lines

can somebody tell me whether playing around with fbset could make things working?

You cannot use fbset anymore to change the window size, you have to use stty cols <value> rows <value>. That implies the driver can set the video mode independently from fbset. If it doesn't, you can use something like this:

fbset 640x480-60 && stty cols 80 rows 30

Tony

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf