Skip to contentSkip to conversation

IDE hangs box after timeout

2.4.21-pre4 Simon Kirby 1 participant 1 message Feb 17, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

I don't think this happened on older kernels (< 2.4.18ish), but it may have happened on 2.4.20 (though I have other problems with 2.4.20 on this box that makes testing more difficult -- it tends to Oops fairly often).

Anyway, this box has a massive collection of old (and new) drives to make a large storage area, using MD linear. The box has two SCSI cards, two promise cards (PDC20269), and onboard IDE (PIIX4). Because the box has so many drives, I had to use a number of power splitters which are, of course, cheap and thus unreliable, and occasionally a few drives will fall off of the bus. This is the real problem, yes, but it seems to be triggering a lockup bug in 2.4.21-pre4. When hda falls off the bus due to power loss, I see this on the console:

hda: dma_timer_expiry: dma status == 0x21
hda: timeout waiting for DMA
hda: timeout waiting for DMA
hda: (__ide_dma_test_irq) called while not waiting

...followed by a complete lockup where sysreq does not appear to work.

dmesg and config available here:

http://blue.netnation.com/sim/ref/alfie.dmesg
http://blue.netnation.com/sim/ref/alfie.config

( Yes, a new power supply is on order. :) )

Simon-

[        Simon Kirby        ][        Network Operations        ]
[     [email protected]     ][     NetNation Communications     ]

[ Opinions expressed are not necessarily those of my employer. ]