2.5.62 fails to boot, Uncompressing... and then nothing
Hiya.
I am experiencing problems getting certain 2.5.60 and 2.5.61 and also 2.5.62 to boot. One 2.5.60 is working, the others are just doing something as I only see the Uncompressing... and then nothing is happening at all except my hard disc doing something which is not booting, I feel. I fail to remember what the difference was between the two versions of 2.5.60 (one running, the other is not).
Any ideas/hints on what this is?
Thanks,
Alexander
Quoted 8 lines · Alexander Koch
I am experiencing problems getting certain 2.5.60 and 2.5.61 and also 2.5.62 to boot. One 2.5.60 is working, the others are just doing something as I only see the Uncompressing... and then nothing is happening at all except my hard disc doing something which is not booting, I feel. I fail to remember what the difference was between the two versions of 2.5.60 (one running, the other is not). Any ideas/hints on what this is?
Do you have ACPI in your .config? Various ppl have been having issues resolved when ACPI's deconfigured lately. Breaking out an early printk patch of some flavor should probably help get some boot logs out so you can debug if you care to do so.
-- wli
From: William Lee Irwin III <[email protected]>
Subject: Re: 2.5.62 fails to boot, Uncompressing... and then nothing
Date: Tue, 18 Feb 2003 23:32:21 -0800
Message-ID: <[email protected]>
Hi,
I have the sam eproblem here, but ACPI is definetly not configured... Any idea else ?
Thank you for any help in advance ! :O)
Kind regards,
Meino
wli> On Wed, Feb 19, 2003 at 08:19:32AM +0100, Alexander Koch wrote:
wli> > I am experiencing problems getting certain 2.5.60 and
wli> > 2.5.61 and also 2.5.62 to boot. One 2.5.60 is working,
wli> > the others are just doing something as I only see the
wli> > Uncompressing... and then nothing is happening at all
wli> > except my hard disc doing something which is not booting, wli> > I feel. I fail to remember what the difference was between wli> > the two versions of 2.5.60 (one running, the other is not). wli> > Any ideas/hints on what this is?
wli>
wli> Do you have ACPI in your .config? Various ppl have been having wli> issues resolved when ACPI's deconfigured lately. Breaking out an wli> early printk patch of some flavor should probably help get some wli> boot logs out so you can debug if you care to do so.
wli>
wli>
wli> -- wli
wli> -
wli> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in wli> the body of a message to [email protected]
wli> More majordomo info at http://vger.kernel.org/majordomo-info.html
wli> Please read the FAQ at http://www.tux.org/lkml/
wli>
Quoted 3 lines · Meino Christian Cramer
I have the sam eproblem here, but ACPI is definetly not configured... Any idea else ?
Thank you for any help in advance ! :O)
Try plopping down any of the more recent early_printk() patches and posting some bootlogs, then.
-- wli
This is becoming a FAQ! Did you enable the console in your .config?
CONFIG_VT=yCONFIG_VT_CONSOLE=y
Most likely you chose to compile the input system as a module, which caused the console options to be autohorribly deselected. Just say 'y' for the input subsystem, at which point the console options will reappear, letting you select them.
I hope this helps,
Duncan.
Quoted 44 lines · Meino Christian Cramer
From: William Lee Irwin III <[email protected]>
Subject: Re: 2.5.62 fails to boot, Uncompressing... and then nothing
Date: Tue, 18 Feb 2003 23:32:21 -0800
Message-ID: <[email protected]>Hi,
I have the sam eproblem here, but ACPI is definetly not configured... Any idea else ?
Thank you for any help in advance ! :O)
Kind regards,
Meinowli> On Wed, Feb 19, 2003 at 08:19:32AM +0100, Alexander Koch wrote:
wli> > I am experiencing problems getting certain 2.5.60 and wli> > 2.5.61 and also 2.5.62 to boot. One 2.5.60 is working, wli> > the others are just doing something as I only see the wli> > Uncompressing... and then nothing is happening at all wli> > except my hard disc doing something which is not booting, wli> > I feel. I fail to remember what the difference was between wli> > the two versions of 2.5.60 (one running, the other is not). wli> > Any ideas/hints on what this is?
wli>
wli> Do you have ACPI in your .config? Various ppl have been having wli> issues resolved when ACPI's deconfigured lately. Breaking out an wli> early printk patch of some flavor should probably help get some wli> boot logs out so you can debug if you care to do so.
wli>
wli>
wli> -- wli
wli> -
wli> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in wli> the body of a message to [email protected] wli> More majordomo info at http://vger.kernel.org/majordomo-info.html
wli> Please read the FAQ at http://www.tux.org/lkml/
wli>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 9 lines · Duncan Sands
This is becoming a FAQ! Did you enable the console in your .config?
CONFIG_VT=yCONFIG_VT_CONSOLE=y
Most likely you chose to compile the input system as a module, which caused the console options to be autohorribly deselected. Just say 'y' for the input subsystem, at which point the console options will reappear, letting you select them.
I hope this helps,
Duncan.
If that's really it there's a chuckle or two to be had.
-- wli
From: Duncan Sands <[email protected]>
Subject: Re: 2.5.62 fails to boot, Uncompressing... and then nothing
Date: Wed, 19 Feb 2003 10:52:47 +0100
Message-ID: <[email protected]>
Hi,
yes, indeed, this was the problem!!! (by the way: HURRAY, IT BOOTS!)
It seems that loading an "old" config file from the 2.4.*-series of linux kernels will WIPE OUT that config items since they are not written back to disk anymore when saving kernel configuartions....
Another thing is that make menuconfig fails to write back configurations as alternate files into directories owned by root and set drwxr-xr-x....but it is able to write into the . directory, even if it is set with drwxr-xr-x also...
But this is only a sideeffect.
Keep Hacking!
Meino
Quoted 14 lines
This is becoming a FAQ! Did you enable the console in your .config?
CONFIG_VT=yCONFIG_VT_CONSOLE=yMost likely you chose to compile the input system as a module, which caused the console options to be autohorribly deselected. Just say 'y' for the input subsystem, at which point the console options will reappear, letting you select them.
I hope this helps,
Duncan.
Meino Christian Cramer, Wed, Feb 19, 2003 13:19:09 +0100:
Quoted 4 lines
Another thing is that make menuconfig fails to write back configurations as alternate files into directories owned by root and set drwxr-xr-x....but it is able to write into the . directory, even if it is set with drwxr-xr-x also...
is the "." also owned by root?
From: Alex Riesen <[email protected]>
Subject: Re: 2.5.62 fails to boot, Uncompressing... and then nothing
Date: Wed, 19 Feb 2003 13:31:38 +0100
Message-ID: <[email protected]>
Hi Alexander !
The settings are as follows:
/usr/src/.
drwxr-xr-x 8 root root 296 Feb 18 20:22 .
drwxr-sr-x 32 root root 1176 Jan 10 07:21 ..
/usr/src/linux-2.5.62/.
drwxr-xr-x 3 root root 72 Feb 16 18:01 . drwxr-xr-x 8 root root 296 Feb 18 20:22 ..
/usr/src/ksetup/. (this is were I kept my "alternate configurations")
drwxr-xr-x 2 root root 3488 Feb 19 12:59 . drwxr-xr-x 8 root root 296 Feb 18 20:22 ..
But everything works fine if
/usr/src/ksetup/.
drwxrwxrwx 2 root root 3488 Feb 19 12:59 . drwxr-xr-x 8 root root 296 Feb 18 20:22 ..
Everythings happens on the same filesystem.
And "I am":
uid=0(root) gid=0(root) groups=0(root)
Hopefully this helps!
Keep hacking!
Meino
alexander.riesen> Meino Christian Cramer, Wed, Feb 19, 2003 13:19:09 +0100:
alexander.riesen> > Another thing is that make menuconfig fails to write back alexander.riesen> > configurations as alternate files into directories owned by root alexander.riesen> > and set drwxr-xr-x....but it is able to write into the . directory, alexander.riesen> > even if it is set with drwxr-xr-x also...
alexander.riesen>
alexander.riesen> is the "." also owned by root?
alexander.riesen>
alexander.riesen> -
alexander.riesen> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in alexander.riesen> the body of a message to [email protected] alexander.riesen> More majordomo info at http://vger.kernel.org/majordomo-info.html
alexander.riesen> Please read the FAQ at http://www.tux.org/lkml/
alexander.riesen>
Quoted 5 lines · Duncan Sands
This is becoming a FAQ! Did you enable the console in your .config?
CONFIG_VT=yCONFIG_VT_CONSOLE=y
[snip]
Quoted 3 lines
I hope this helps,
Hi, I'd like to pipe in with another report of 2.5.62 not booting. I _do_ have these lines in my .config and 2.4.19 boots easily while 2.5.62 does not. In fact, neither does 2.5.61.
2.5.59 (with a virtually identical .config) boots fine, but when I reboot 2.4.19 suddenly doesn't boot (just once, though). If I turn the machine off and back on that problem goes away. I am not sure if it is related.
I am not using ACPI. I am using APM. The system is a Dell Inspiron 8200 with a 1.4 Ghz Mobile P4. The bootloader is lilo. Any other information I'd be glad to give, but debugging is hard because the kernel doesn't even get to the stage where it prints out it's own version number.
Regards,
Floris Kraak
Signature · 2 lines
"If you continue using Windows your system may become unstable." -- Windows 95 BSOD
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"William" == William Lee Irwin, <William> writes:
William> Hi, I have the sam eproblem here, but ACPI is definetly not William> configured... Any idea else ?
I see this regularly if I've forgotten to configure in the input layer or any consoles. At least one console device has to be in-kernel otherwise I see the hang mentioned.
--
Dr Peter Chubb [email protected]
You are lost in a maze of BitKeeper repositories, all almost the same.