Skip to contentSkip to conversation

ide ioctls draft manpage - feedback wanted

DISCUSSION Julien Plissonneau Duquene 1 participant 1 message Feb 23, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I needed a doc to HDIO_... ioctls, couldn't find any, and decided to write my own. I use those to write data (or drives) recovery programs that bypass almost completely the block I/O. The programs are not written yet, I would like to understand the IDE layer first.

It can be found here :
http://junk.org/~jpd/kernelstuff/ide_ioctls
for the "formatted" edition, just add .4 for the source code.

This is about kernel 2.4.19, I lack bandwidth/time/drive space/financial incentives to upgrade. Mostly bandwidth. And thus I will follow the discussions on the list archives, so don't expect replies in the minute.

If you know better than me on the subject (e.g. you write IDE drivers, IDE utilities that need to send raw commands, or are among the IDE maintainers) I would like to hear from you. There are blanks on the page, stuff I guessed, and stuff I don't really understand.

Thanks in advance for help.

Signature · 1 line
Julien Plissonneau Duquène.