Hex numbers in NCR53c406a.c
PATCH 1/1 Hex numbers in NCR53c406a.c
This patch makes sure that there is a "0x" in front of all hex numbers and makes all outputs use a single style (all %x instead of mixed %x and %X).
Eike
drivers/scsi/NCR53c406a.c +8 -8
@@ -472,7 +472,7 @@return 0 ; } - DEB(printk("NCR53c406a BIOS found at %X\n", (unsigned int) bios_base); + DEB(printk("NCR53c406a BIOS found at 0x%x\n", (unsigned int) bios_base); );#endif /* USE_BIOS */
@@ -487,14 +487,14 @@ }else {for (i =0 ; i <PORT_COUNT && !port_base; i++) {if (!request_region (ports[i],0x10 ,"NCR53c406a" )) { -DEB (printk ("NCR53c406a: port %x in use\n" , ports[i])); +DEB (printk ("NCR53c406a: port 0x%x in use\n" , ports[i])); }else { -VDEB (printk ("NCR53c406a: port %x available\n" , ports[i])); +VDEB (printk ("NCR53c406a: port 0x%x available\n" , ports[i]));outb (C5_IMG , ports[i] +0x0d );/* reg set 1 */ if ((inb (ports[i] +0x0e ) ^inb (ports[i] +0x0e )) ==7 && (inb (ports[i] +0x0e ) ^inb (ports[i] +0x0e )) ==7 && (inb (ports[i] +0x0e ) &0xf8 ) ==0x58 ) { port_base = ports[i];VDEB (printk ("NCR53c406a: Sig register valid\n" )); -VDEB (printk ("port_base=%x\n" , port_base)); +VDEB (printk ("port_base=0x%x\n" , port_base));break ; }release_region (ports[i],0x10 );
@@ -523,7 +523,7 @@ }#endif -DEB (printk ("NCR53c406a: using port_base %x\n" , port_base)); +DEB (printk ("NCR53c406a: using port_base 0x%x\n" , port_base)); tpnt->present =1 ; tpnt->proc_name ="NCR53c406a" ;
@@ -611,11 +611,11 @@for (i =0 ; i <PORT_COUNT && !port_base; i++)if (ports[i] == ints[1 ]) { port_base = ints[1 ]; - DEB(printk("NCR53c406a: Specified port_base 0x%X\n", port_base); + DEB(printk("NCR53c406a: Specified port_base 0x%x\n", port_base); ) }if (!port_base) { -printk ("NCR53c406a: Invalid PORTBASE 0x%X specified\n" , ints[1 ]); +printk ("NCR53c406a: Invalid PORTBASE 0x%x specified\n" , ints[1 ]);return ; }
@@ -638,7 +638,7 @@if (ints[0 ] >2 ) fast_pio = ints[3 ]; - DEB(printk("NCR53c406a: port_base=0x%X, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);) + DEB(printk("NCR53c406a: port_base=0x%x, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);) }__setup ("ncr53c406a=" , NCR53c406a_setup);