update qlogic pcmcia support

@@ -127,11 +127,6 @@
 #endif
 
 #include <linux/module.h>
-
-#ifdef PCMCIA
-#undef MODULE
-#endif
-
 #include <linux/blk.h>		/* to get disk capacity */
 #include <linux/kernel.h>
 #include <linux/string.h>

@@ -148,7 +143,6 @@
 
 #include "scsi.h"
 #include "hosts.h"
-#include "qlogicfas.h"
 
 /*----------------------------------------------------------------*/
 /* driver state info, local to driver */

@@ -166,6 +160,8 @@
 static int qlcfg9 = ((XTALFREQ + 4) / 5);
 static int qlcfgc = (FASTCLK << 3) | (FASTSCSI << 4);
 
+int qlogicfas_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
+
 /*----------------------------------------------------------------*/
 /* The qlogic card uses two register maps - These macros select which one */
 #define REG0 ( outb( inb( qbase + 0xd ) & 0x7f , qbase + 0xd ), outb( 4 , qbase + 0xd ))

@@ -631,14 +627,12 @@
  *	Look for qlogic card and init if found 
  */
  
-int __devinit qlogicfas_detect(Scsi_Host_Template * host)
+struct Scsi_Host *__qlogicfas_detect(Scsi_Host_Template *host)
 {
 	int i, j;		/* these are only used by IRQ detect */
 	int qltyp;		/* type of chip */
 	struct Scsi_Host *hreg;	/* registered host structure */
 
-	host->proc_name = "qlogicfas";
-
 	/*	Qlogic Cards only exist at 0x230 or 0x330 (the chip itself
 	 *	decodes the address - I check 230 first since MIDI cards are
 	 *	typically at 0x330

@@ -659,7 +653,7 @@
 			release_region(qbase, 0x10);
 		}
 		if (qbase == 0x430)
-			return 0;
+			return NULL;;
 	} else
 		printk(KERN_INFO "Ql: Using preset base address of %03x\n", qbase);
 

@@ -726,16 +720,21 @@
 		qltyp, qbase, qlirq, QL_TURBO_PDMA);
 	host->name = qinfo;
 
-	return 1;
+	return hreg;
 
 err_release_mem:
 	release_region(qbase, 0x10);
 	if (host->can_queue)
 		free_irq(qlirq, do_ql_ihandl);
-	return 0;
+	return NULL;;
 
 }
 
+int __devinit qlogicfas_detect(Scsi_Host_Template *sht)
+{
+	return (__qlogicfas_detect(sht) != NULL);
+}
+
 /* 
  *	Return bios parameters 
  */

@@ -777,7 +776,7 @@
  *	the PCMCIA qlogic_stub code. This wants fixing
  */
 
-static int qlogicfas_bus_reset(Scsi_Cmnd * cmd)
+int qlogicfas_bus_reset(Scsi_Cmnd * cmd)
 {
 	qabort = 2;
 	ql_zap();

@@ -818,9 +817,27 @@
 /*
  *	The driver template is also needed for PCMCIA
  */
- 
-Scsi_Host_Template qlogicfas_driver_template = QLOGICFAS;
-#define driver_template qlogicfas_driver_template
+Scsi_Host_Template qlogicfas_driver_template = {
+	.module			= THIS_MODULE,
+	.name			= "qlogicfas",
+	.proc_name		= "qlogicfas",
+	.detect			= qlogicfas_detect,
+	.info			= qlogicfas_info,
+	.command		= qlogicfas_command,
+	.queuecommand		= qlogicfas_queuecommand,
+	.eh_abort_handler	= qlogicfas_abort,
+	.eh_bus_reset_handler	= qlogicfas_bus_reset,
+	.eh_device_reset_handler= qlogicfas_device_reset,
+	.eh_host_reset_handler	= qlogicfas_host_reset,
+	.bios_param		= qlogicfas_biosparam,
+	.can_queue		= 0,
+	.this_id		= -1,
+	.sg_tablesize		= SG_ALL,
+	.cmd_per_lun		= 1,
+	.use_clustering		= DISABLE_CLUSTERING,
+};
 
+#ifndef PCMCIA
+#define driver_template qlogicfas_driver_template
 #include "scsi_module.c"
-
+#endif

@@ -1,34 +0,0 @@
-#ifndef _QLOGICFAS_H
-#define _QLOGICFAS_H
-
-static int qlogicfas_detect(Scsi_Host_Template * );
-static const char * qlogicfas_info(struct Scsi_Host *);
-static int qlogicfas_command(Scsi_Cmnd *);
-static int qlogicfas_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
-static int qlogicfas_abort(Scsi_Cmnd *);
-static int qlogicfas_bus_reset(Scsi_Cmnd *);
-static int qlogicfas_device_reset(Scsi_Cmnd *);
-static int qlogicfas_host_reset(Scsi_Cmnd *);
-static int qlogicfas_biosparam(struct scsi_device *, struct block_device *,
-			       sector_t, int[]);
-
-#define QLOGICFAS {						\
-	.detect         		= qlogicfas_detect,	\
-	.info           		= qlogicfas_info,		\
-	.command     			= qlogicfas_command, 	\
-	.queuecommand			= qlogicfas_queuecommand,	\
-	.eh_abort_handler          	= qlogicfas_abort,	\
-	.eh_bus_reset_handler		= qlogicfas_bus_reset,	\
-	.eh_device_reset_handler        = qlogicfas_device_reset,	\
-	.eh_host_reset_handler          = qlogicfas_host_reset,	\
-	.bios_param     = qlogicfas_biosparam,			\
-	.can_queue      = 0,					\
-	.this_id        = -1,					\
-	.sg_tablesize   = SG_ALL,					\
-	.cmd_per_lun    = 1,					\
-	.use_clustering = DISABLE_CLUSTERING			\
-}
-#endif /* _QLOGICFAS_H */
-
-
-

163 lines not on this page · raw message