Skip to contentSkip to conversation

eepro100 ?

DISCUSSION Robert L. Harris 2 participants 2 messages Mar 4, 2003

lore
Share & tools
lore
#0 lore raw

I have 2 machines with eepro100 cards. I used the original driver for them out of habit and on the last 2.4.20 kernel get A LOT of:

eth0: freeing mc frame.

in my dmesg log. Out of curiosity I tried with the alternate driver and that seems to have gone away. Is one depreciated or are they both
viable and just different? The help message doesn't really say much on
the topic.

< > EtherExpressPro/100 support (eepro100, original Becker driver)
< > EtherExpressPro/100 support (e100, Alternate Intel driver)

Robert

:wq!
---------------------------------------------------------------------------
Robert L. Harris | PGP Key ID: E344DA3B

                                         @ x-hkp://pgp.mit.edu 

DISCLAIMER:
These are MY OPINIONS ALONE. I speak for no-one else.

Diagnosis: witzelsucht

IPv6 = [email protected] http://ipv6.rdlg.net
IPv4 = [email protected] http://www.rdlg.net

#1 lore raw
Quoted 7 lines · Robert L. Harris

in my dmesg log. Out of curiosity I tried with the alternate driver and that seems to have gone away. Is one depreciated or are they both
viable and just different? The help message doesn't really say much on
the topic.

< > EtherExpressPro/100 support (eepro100, original Becker driver)
< > EtherExpressPro/100 support (e100, Alternate Intel driver)

e100 is intels own driver which was initially proprietary but has since been cleaned up a lot and relicensed GPL, then merged with the kernel. The e100 driver is probably the best driver to be using nowdays although both should work reliably