E: Loading and executing kernel from a non-standard address usin g SY SLINUX
Quoted 8 lines · On Wed, 5 Mar 2003 [email protected] wrote:
Yup,
Thanks I got that. The physical address is computed using (virtual address) -PAGE_OFFSET. So if my decompressed kernel is loaded at the physical address0x200000(I defined this address), I would need the linker to know it. Actually I went past that stage and now I got intostart_kernel.. however it seems to be hanging somewhere after that. Is there any other kernel changes I need to make to avoid this hanging for a normal boot.
You cannot get the kernel to run from a different physical address by changing PAGE_OFFSET. This is not what PAGE_OFFSET is for. PAGE_OFFSET specifies the offset of virtual memory from the start of physical memory, which is assumed to be 0x0.
You should never want to change PAGE_OFFSET.
Quoted 3 lines
Thats why I tried to change
thePAGE_OFFSETvalue to0xc0100000, which should be the right value corresponding to (0x200000).
Wrong.
If you really do want the kernel to run at 0x200000 physical, you should try changing the link address to 0xc0200000. I'm no expert on the i386 kernel (I know the PPC kernel), but there's no guarantee that this will work, if there's any code which assumes the kernel is at 0x100000 physical.
Phillip
Quoted 1 line
-Ravi