Skip to contentSkip to conversation

cpufreq (7/7): update documentation

PATCH New Russell King 1 participant 1 message Mar 9, 2003

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 cpufreq (7/7): update documentation

----- Forwarded message from Dominik Brodowski <[email protected]> -----

From: Dominik Brodowski <[email protected]>
To: [email protected]
Cc: [email protected]
Subject: [PATCH] cpufreq (7/7): update documentation
Date: Fri, 7 Mar 2003 11:09:28 +0100

The sysfs directory where the cpufreq-related files are stored changed due to the new device interface code, so the documentation needs to be updated accordingly. Also, add some information about the reference counting and the exporting of sysfs files by the drivers.

Please apply,
Dominik

 core.txt        |    4 ++++
 cpu-drivers.txt |    3 +++
 user-guide.txt  |    8 ++++----
 3 files changed, 11 insertions(+), 4 deletions(-)
Documentation/cpu-freq/core.txt +4 -0
diff -ruN linux-original/Documentation/cpu-freq/core.txt linux/Documentation/cpu-freq/core.txt
@@ -35,6 +35,10 @@
 kernel "constant" loops_per_jiffy is updated on frequency changes
 here.
 
+Reference counting is done by cpufreq_get_cpu and cpufreq_put_cpu,
+which make sure that the cpufreq processor driver is correctly
+registered with the core, and will not be unloaded until
+cpufreq_put_cpu is called.
 
 2. CPUFreq notifiers
 ====================
Documentation/cpu-freq/cpu-drivers.txt +3 -0
diff -ruN linux-original/Documentation/cpu-freq/cpu-drivers.txt linux/Documentation/cpu-freq/cpu-drivers.txt
@@ -63,6 +63,9 @@
 
 cpufreq_driver.exit -		A pointer to a per-CPU cleanup function.
 
+cpufreq_driver.attr -		A pointer to a NULL-terminated list of
+				"struct freq_attr" which allow to
+				export values to sysfs.
 
 
 1.2 Per-CPU Initialization
Documentation/cpu-freq/user-guide.txt +4 -4
diff -ruN linux-original/Documentation/cpu-freq/user-guide.txt linux/Documentation/cpu-freq/user-guide.txt
@@ -114,9 +114,9 @@
 ------------------------------
 
 The preferred interface is located in the sysfs filesystem. If you
-mounted it at /sys, the cpufreq interface is located in the 
-cpu-device directory (e.g. /sys/devices/sys/cpu0/ for the first
-CPU).
+mounted it at /sys, the cpufreq interface is located in a subdirectory
+"cpufreq" within the cpu-device directory
+(e.g. /sys/devices/sys/cpu0/cpufreq/ for the first CPU).
 
 cpuinfo_min_freq :		this file shows the minimum operating
 				frequency the processor can run at(in kHz) 
@@ -125,7 +125,7 @@
 scaling_driver :		this file shows what cpufreq driver is
 				used to set the frequency on this CPU
 
-available_scaling_governors :	this file shows the CPUfreq governors
+scaling_available_governors :	this file shows the CPUfreq governors
 				available in this kernel. You can see the
 				currently activated governor in
 

_______________________________________________
Cpufreq mailing list
[email protected]
http://www.linux.org.uk/mailman/listinfo/cpufreq

----- End forwarded message -----

Signature · 2 lines
Russell King ([email protected])                The developer of ARM Linux
             http://www.arm.linux.org.uk/personal/aboutme.html