Skip to contentSkip to conversation

Syntax errors in 2.4.21pre5 configure scripts

PATCH New Andreas Gruenbacher 1 participant 1 message Mar 9, 2003

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Syntax errors in 2.4.21pre5 configure scripts

Hello Marcelo,

please find attached a patch against 2.4.21pre5 that fixes a number of syntax errors in the pre5 kernel. Without this, several architectures cannot be configured with "make xconfig", or the KDE kernel configurator.

Cheers,
Andreas Gruenbacher.

------------------------------------------------------------------
Andreas Gruenbacher SuSE Linux AG
mailto:[email protected] Deutschherrnstr. 15-19
http://www.suse.de/ D-90429 Nuernberg, Germany

Fix some syntax errors in kernel configure scripts (Sent to Marcelo on 9 March 2003.)

This patch against 2.4.21pre5 fixes a number of syntax errors in configure scripts of various (non-i386) architectures. The KDE kernel configurator in kcontrol as well as `make xconfig' puke on them.

Andreas Gruenbacher <[email protected]>

s390/Config.in 2003-03-09 21:44:13.000000000 +0100 renamed from s390/Config.in.orig 2003-03-09 21:44:08.000000000 +0100 +1 -1
@@ -17,7 +17,7 @@
   dep_tristate '   Support for ECKD Disks' CONFIG_DASD_ECKD $CONFIG_DASD
   if [ "$CONFIG_DASD_ECKD" = "m" ]; then
     bool     '   Automatic activation of ECKD module' CONFIG_DASD_AUTO_ECKD
-  fi;
+  fi
   dep_tristate '   Support for FBA  Disks' CONFIG_DASD_FBA $CONFIG_DASD
   if [ "$CONFIG_DASD_FBA" = "m" ]; then
     bool     '   Automatic activation of FBA  module' CONFIG_DASD_AUTO_FBA
m68k/config.in renamed from m68k/config.in.orig +1 -1
@@ -502,7 +502,7 @@
      "$CONFIG_SUN3X_ZS" = "y" -o "$CONFIG_SERIAL" = "y" -o \
      "$CONFIG_MVME147_SCC" -o "$CONFIG_SERIAL167" = "y" -o \
      "$CONFIG_MVME162_SCC" -o "$CONFIG_BVME6000_SCC" = "y" -o \
-     "$CONFIG_DN_SERIAL" -o ]; then
+     "$CONFIG_DN_SERIAL" ]; then
    bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
 fi
 bool 'Support for user serial device modules' CONFIG_USERIAL
mips/config-shared.in renamed from mips/config-shared.in.orig +1 -1
@@ -479,7 +479,7 @@
 if [ "$CONFIG_CPU_SB1" = "y" ]; then
    choice 'SB1 Pass' \
 	 "Pass1   CONFIG_CPU_SB1_PASS_1  \
-	  Pass2   CONFIG_CPU_SB1_PASS_2
+	  Pass2   CONFIG_CPU_SB1_PASS_2  \
 	  Pass2.2 CONFIG_CPU_SB1_PASS_2_2" Pass1
    if [ "$CONFIG_CPU_SB1_PASS_1" = "y" ]; then
       define_bool CONFIG_SB1_PASS_1_WORKAROUNDS y
s390/Config.in renamed from s390/Config.in.orig +3 -3
@@ -21,14 +21,14 @@
   dep_tristate '   Support for FBA  Disks' CONFIG_DASD_FBA $CONFIG_DASD
   if [ "$CONFIG_DASD_FBA" = "m" ]; then
     bool     '   Automatic activation of FBA  module' CONFIG_DASD_AUTO_FBA
-  fi;
+  fi
 #  dep_tristate '   Support for CKD  Disks' CONFIG_DASD_CKD $CONFIG_DASD
   if [ "$CONFIG_ARCH_S390X" != "y" ]; then
     dep_tristate '   Support for DIAG access to CMS reserved Disks' CONFIG_DASD_DIAG $CONFIG_DASD
     if [ "$CONFIG_DASD_DIAG" = "m" ]; then
       bool     '   Automatic activation of DIAG module' CONFIG_DASD_AUTO_DIAG
-    fi;
-  fi; 
+    fi
+  fi
 fi
 
 endmenu
arm/config.in renamed from arm/config.in.orig +1 -1
@@ -538,7 +538,7 @@
 endmenu
 
 if [ "$CONFIG_ARCH_CLPS711X" = "y" ]; then
-   source drivers/ssi/Config.in
+   source drivers/scsi/Config.in
 fi
 
 source drivers/ieee1394/Config.in