Skip to contentSkip to conversation

ACPI produces 100% system load

DISCUSSION noth 2 participants 2 messages Mar 13, 2003 – Mar 14, 2003 1 message not in the archive ACPI

lore
Share & tools
lore

noth

author
#0 lore raw

This is on a Toshiba Satellite 5205. I have settled on the options of AC Adapter, Battery, Processor, Thermal Zone, and the Toshiba extras. After having the same results from every other possible configuration. I went through the message boards and found a mention of the Fan, and Toshiba extras conflicting. Not having the Fan selected at least "seems" to lessen the problem (system usage is still 100% but it seems I can steal back almost 80% (In spikes only!) of the processor with out the fan option. 30% or so with it.). This is a legacy free system (no accessible bios) so I kind of need ACPI to work. Not sure what is causing it au, top, etc... do not report any thing useful. I am using the latest Gentoo-sources kernel, as I get the same results from it as I do from the Lost-logic and Vanilla sources. I have not attached the acpidmp (too large for mailing list).

System uses an Intel 82845, 82801 chipset and Pentium4-m.

dmesg info :

	ACPI: Subsystem revision 20021122
    ACPI-0511: *** Info: GPE Block0 defined as GPE0 to GPE15

ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12, disabled)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12, disabled)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 6 7 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12, disabled)
ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12, disabled)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PFN1] (off)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
VFS: Diskquotas version dquot_6.4.0 initialized
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2 C3, 2 performance states)
ACPI: Thermal Zone [THRM] (45 C)
Toshiba Laptop ACPI Extras version 0.13
Intel(R) PRO/100 Network Driver - version 2.1.24-k1
PPP generic driver version 2.4.2
klips_info:ipsec_init: KLIPS startup, FreeS/WAN IPSec version:
super-freeswan-1.99_kb3
i2c-core.o: i2c core module version 2.7.0 (20021208)
i2c-proc.o version 2.7.0 (20021208)
lm75.o version 2.7.0 (20021208)
eeprom.o version 2.7.0 (20021208)
ltc1710.o version 2.7.0 (20021208)
smbus-arp.o version 2.7.0 (20021208)
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 312 bytes per conntrack

NOTE : The battery report is correct.

-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 3 lines · noth [[email protected]] wrote:

thing useful. I am using the latest Gentoo-sources kernel, as I get the same results from it as I do from the Lost-logic and Vanilla sources. I have not attached the acpidmp (too large for mailing list).

Use the vanilla-sources + latest acpi from sourceforge for testing. acpi-sources lags behind development a little. gentoo-sources has a lot of patches applied to it but not the latest acpi :)

I like the Con Kolivas patches but I'd only apply those once the rest of your system is working ok.

Faye

Signature · 10 lines
Faye Pearson,
Covert Development
ClaraNET Ltd.       Tel 020 7903 3000


-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open! 
Get cracking and register here for some mind boggling fun and 
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en