Add printk KERN_* prefixes in 3c505.c
PATCH 1/1 Add printk KERN_* prefixes in 3c505.c
This patch adds KERN_* prefixes to almost all printk of 3c505.c in the 2.5.64 kernel tree.
Signature · 3 lines
---------------------------------------- Daniele Venzano Web: http://digilander.iol.it/webvenza/
drivers/net/3c505.c +69 -69
@@ -313,7 +313,7 @@outb_control (orig_hcr, dev);if (!start_receive (dev, &adapter->tx_pcb)) -printk ("%s: start receive command failed \n" , dev->name); +printk (KERN_ERR "%s: start receive command failed \n" , dev->name); }/* Check to make sure that a DMA transfer hasn't timed out. This should
@@ -325,7 +325,7 @@elp_device *adapter = dev->priv;if (adapter->dmaing &&time_after (jiffies, adapter->current_dma.start_time +10 )) {unsigned long flags, f; -printk ("%s: DMA %s timed out, %d bytes left\n" , dev->name, adapter->current_dma.direction ?"download" :"upload" ,get_dma_residue (dev->dma)); +printk (KERN_ERR "%s: DMA %s timed out, %d bytes left\n" , dev->name, adapter->current_dma.direction ?"download" :"upload" ,get_dma_residue (dev->dma));spin_lock_irqsave (&adapter->lock, flags); adapter->dmaing =0 ; adapter->busy =0 ;
@@ -350,7 +350,7 @@if (inb_status (base_addr) &HCRE )return FALSE; } -printk ("3c505: send_pcb_slow timed out\n" ); +printk (KERN_WARNING "3c505: send_pcb_slow timed out\n" );return TRUE; }
@@ -362,7 +362,7 @@if (inb_status (base_addr) &HCRE )return FALSE; } -printk ("3c505: send_pcb_fast timed out\n" ); +printk (KERN_WARNING "3c505: send_pcb_fast timed out\n" );return TRUE; }
@@ -415,7 +415,7 @@/* Avoid contention */ if (test_and_set_bit (1 , &adapter->send_pcb_semaphore)) {if (elp_debug >=3 ) { -printk ("%s: send_pcb entered while threaded\n" , dev->name); +printk (KERN_DEBUG "%s: send_pcb entered while threaded\n" , dev->name); }return FALSE; }
@@ -461,7 +461,7 @@ }if (elp_debug >=1 ) -printk ("%s: timeout waiting for PCB acknowledge (status %02x)\n" , dev->name,inb_status (dev->base_addr)); +printk (KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n" , dev->name,inb_status (dev->base_addr)); sti_abort:spin_unlock_irqrestore (&adapter->lock, flags);
@@ -510,7 +510,7 @@while (((stat =get_status (dev->base_addr)) &ACRF ) ==0 &&time_before (jiffies, timeout));if (time_after_eq (jiffies, timeout)) {TIMEOUT_MSG (__LINE__); -printk ("%s: status %02x\n" , dev->name, stat); +printk (KERN_INFO "%s: status %02x\n" , dev->name, stat);return FALSE; } pcb->length =inb_command (dev->base_addr);
@@ -541,7 +541,7 @@/* safety check total length vs data length */ if (total_length != (pcb->length +2 )) {if (elp_debug >=2 ) -printk ("%s: mangled PCB received\n" , dev->name); +printk (KERN_NOTICE "%s: mangled PCB received\n" , dev->name);set_hsf (dev,HSF_PCB_NAK );return FALSE; }
@@ -550,7 +550,7 @@if (test_and_set_bit (0 , (void *) &adapter->busy)) {if (backlog_next (adapter->rx_backlog.in) == adapter->rx_backlog.out) {set_hsf (dev,HSF_PCB_NAK ); -printk ("%s: PCB rejected, transfer in progress and backlog full\n" , dev->name); +printk (KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n" , dev->name); pcb->command =0 ;return TRUE; }else {
@@ -575,7 +575,7 @@elp_device *adapter = dev->priv;if (elp_debug >=3 ) -printk ("%s: restarting receiver\n" , dev->name); +printk (KERN_DEBUG "%s: restarting receiver\n" , dev->name); tx_pcb->command =CMD_RECEIVE_PACKET ; tx_pcb->length =sizeof (struct Rcv_pkt ); tx_pcb->data.rcv_pkt.buf_seg
@@ -609,7 +609,7 @@ skb =dev_alloc_skb (rlen +2 );if (!skb) { -printk ("%s: memory squeeze, dropping packet\n" , dev->name); +printk (KERN_WARNING "%s: memory squeeze, dropping packet\n" , dev->name); target = adapter->dma_buffer; adapter->current_dma.target =NULL ;return ;
@@ -626,7 +626,7 @@/* if this happens, we die */ if (test_and_set_bit (0 , (void *) &adapter->dmaing)) -printk ("%s: rx blocked, DMA in progress, dir %d\n" , dev->name, adapter->current_dma.direction); +printk (KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n" , dev->name, adapter->current_dma.direction); skb->dev = dev; adapter->current_dma.direction =0 ;
@@ -646,14 +646,14 @@release_dma_lock (flags);if (elp_debug >=3 ) { -printk ("%s: rx DMA transfer started\n" , dev->name); +printk (KERN_DEBUG "%s: rx DMA transfer started\n" , dev->name); }if (adapter->rx_active) adapter->rx_active--;if (!adapter->busy) -printk ("%s: receive_packet called, busy not set.\n" , dev->name); +printk (KERN_WARNING "%s: receive_packet called, busy not set.\n" , dev->name); }/******************************************************
@@ -682,10 +682,10 @@*/ if (inb_status (dev->base_addr) &DONE ) {if (!adapter->dmaing) { -printk ("%s: phantom DMA completed\n" , dev->name); +printk (KERN_WARNING "%s: phantom DMA completed\n" , dev->name); }if (elp_debug >=3 ) { -printk ("%s: %s DMA complete, status %02x\n" , dev->name, adapter->current_dma.direction ?"tx" :"rx" ,inb_status (dev->base_addr)); +printk (KERN_DEBUG "%s: %s DMA complete, status %02x\n" , dev->name, adapter->current_dma.direction ?"tx" :"rx" ,inb_status (dev->base_addr)); }outb_control (adapter->hcr_val & ~(DMAE |TCEN |DIR ), dev);
@@ -709,7 +709,7 @@int t = adapter->rx_backlog.length[adapter->rx_backlog.out]; adapter->rx_backlog.out =backlog_next (adapter->rx_backlog.out);if (elp_debug >=2 ) -printk ("%s: receiving backlogged packet (%d)\n" , dev->name, t); +printk (KERN_INFO "%s: receiving backlogged packet (%d)\n" , dev->name, t);receive_packet (dev, t); }else { adapter->busy =0 ;
@@ -743,18 +743,18 @@printk (KERN_ERR "%s: interrupt - packet not received correctly\n" , dev->name); }else {if (elp_debug >=3 ) { -printk ("%s: interrupt - packet received of length %i (%i)\n" , dev->name, len, dlen); +printk (KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n" , dev->name, len, dlen); }if (adapter->irx_pcb.command ==0xff ) {if (elp_debug >=2 ) -printk ("%s: adding packet to backlog (len = %d)\n" , dev->name, dlen); +printk (KERN_DEBUG "%s: adding packet to backlog (len = %d)\n" , dev->name, dlen); adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen; adapter->rx_backlog.in =backlog_next (adapter->rx_backlog.in); }else {receive_packet (dev, dlen); }if (elp_debug >=3 ) -printk ("%s: packet received\n" , dev->name); +printk (KERN_DEBUG "%s: packet received\n" , dev->name); }break ;
@@ -764,7 +764,7 @@case CMD_CONFIGURE_82586_RESPONSE : adapter->got[CMD_CONFIGURE_82586 ] =1 ;if (elp_debug >=3 ) -printk ("%s: interrupt - configure response received\n" , dev->name); +printk (KERN_DEBUG "%s: interrupt - configure response received\n" , dev->name);break ;/*
@@ -773,7 +773,7 @@case CMD_CONFIGURE_ADAPTER_RESPONSE : adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY ] =1 ;if (elp_debug >=3 ) -printk ("%s: Adapter memory configuration %s.\n" , dev->name, +printk (KERN_DEBUG "%s: Adapter memory configuration %s.\n" , dev->name, adapter->irx_pcb.data.failed ?"failed" :"succeeded" );break ;
@@ -783,7 +783,7 @@case CMD_LOAD_MULTICAST_RESPONSE : adapter->got[CMD_LOAD_MULTICAST_LIST ] =1 ;if (elp_debug >=3 ) -printk ("%s: Multicast address list loading %s.\n" , dev->name, +printk (KERN_DEBUG "%s: Multicast address list loading %s.\n" , dev->name, adapter->irx_pcb.data.failed ?"failed" :"succeeded" );break ;
@@ -793,7 +793,7 @@case CMD_SET_ADDRESS_RESPONSE : adapter->got[CMD_SET_STATION_ADDRESS ] =1 ;if (elp_debug >=3 ) -printk ("%s: Ethernet address setting %s.\n" , dev->name, +printk (KERN_DEBUG "%s: Ethernet address setting %s.\n" , dev->name, adapter->irx_pcb.data.failed ?"failed" :"succeeded" );break ;
@@ -810,7 +810,7 @@ adapter->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res; adapter->got[CMD_NETWORK_STATISTICS ] =1 ;if (elp_debug >=3 ) -printk ("%s: interrupt - statistics response received\n" , dev->name); +printk (KERN_DEBUG "%s: interrupt - statistics response received\n" , dev->name);break ;/*
@@ -818,7 +818,7 @@*/ case CMD_TRANSMIT_PACKET_COMPLETE :if (elp_debug >=3 ) -printk ("%s: interrupt - packet sent\n" , dev->name); +printk (KERN_DEBUG "%s: interrupt - packet sent\n" , dev->name);if (!netif_running (dev))break ;switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
@@ -842,7 +842,7 @@break ; } }else { -printk ("%s: failed to read PCB on interrupt\n" , dev->name); +printk (KERN_WARNING "%s: failed to read PCB on interrupt\n" , dev->name);adapter_reset (dev); } }
@@ -872,13 +872,13 @@ adapter = dev->priv;if (elp_debug >=3 ) -printk ("%s: request to open device\n" , dev->name); +printk (KERN_DEBUG "%s: request to open device\n" , dev->name);/* * make sure we actually found the device */ if (adapter ==NULL ) { -printk ("%s: Opening a non-existent physical device\n" , dev->name); +printk (KERN_WARNING "%s: Opening a non-existent physical device\n" , dev->name);return -EAGAIN ; }/*
@@ -945,7 +945,7 @@ adapter->tx_pcb.length =sizeof (struct Memconf ); adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY ] =0 ;if (!send_pcb (dev, &adapter->tx_pcb)) -printk ("%s: couldn't send memory configuration command\n" , dev->name); +printk (KERN_ERR "%s: couldn't send memory configuration command\n" , dev->name);else {int timeout = jiffies +TIMEOUT ;while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY ] ==0 &&time_before (jiffies, timeout));
@@ -958,13 +958,13 @@* configure adapter to receive broadcast messages and wait for response */ if (elp_debug >=3 ) -printk ("%s: sending 82586 configure command\n" , dev->name); +printk (KERN_DEBUG "%s: sending 82586 configure command\n" , dev->name); adapter->tx_pcb.command =CMD_CONFIGURE_82586 ; adapter->tx_pcb.data.configure =NO_LOOPBACK |RECV_BROAD ; adapter->tx_pcb.length =2 ; adapter->got[CMD_CONFIGURE_82586 ] =0 ;if (!send_pcb (dev, &adapter->tx_pcb)) -printk ("%s: couldn't send 82586 configure command\n" , dev->name); +printk (KERN_ERR "%s: couldn't send 82586 configure command\n" , dev->name);else {int timeout = jiffies +TIMEOUT ;while (adapter->got[CMD_CONFIGURE_82586 ] ==0 &&time_before (jiffies, timeout));
@@ -980,7 +980,7 @@*/ prime_rx (dev);if (elp_debug >=3 ) -printk ("%s: %d receive PCBs active\n" , dev->name, adapter->rx_active); +printk (KERN_DEBUG "%s: %d receive PCBs active\n" , dev->name, adapter->rx_active);/* * device is now officially open!
@@ -1010,7 +1010,7 @@if (test_and_set_bit (0 , (void *) &adapter->busy)) {if (elp_debug >=2 ) -printk ("%s: transmit blocked\n" , dev->name); +printk (KERN_DEBUG "%s: transmit blocked\n" , dev->name);return FALSE; }
@@ -1032,7 +1032,7 @@ }/* if this happens, we die */ if (test_and_set_bit (0 , (void *) &adapter->dmaing)) -printk ("%s: tx: DMA %d in progress\n" , dev->name, adapter->current_dma.direction); +printk (KERN_ERR "%s: tx: DMA %d in progress\n" , dev->name, adapter->current_dma.direction); adapter->current_dma.direction =1 ; adapter->current_dma.start_time = jiffies;
@@ -1058,7 +1058,7 @@release_dma_lock (flags);if (elp_debug >=3 ) -printk ("%s: DMA transfer started\n" , dev->name); +printk (KERN_DEBUG "%s: DMA transfer started\n" , dev->name);return TRUE; }
@@ -1075,7 +1075,7 @@ stat =inb_status (dev->base_addr);printk (KERN_WARNING "%s: transmit timed out, lost %s?\n" , dev->name, (stat &ACRF ) ?"interrupt" :"command" );if (elp_debug >=1 ) -printk ("%s: status %#02x\n" , dev->name, stat); +printk (KERN_DEBUG "%s: status %#02x\n" , dev->name, stat); dev->trans_start = jiffies; adapter->stats.tx_dropped++;netif_wake_queue (dev);
@@ -1097,7 +1097,7 @@check_3c505_dma (dev);if (elp_debug >=3 ) -printk ("%s: request to send packet of length %d\n" , dev->name, (int ) skb->len); +printk (KERN_DEBUG "%s: request to send packet of length %d\n" , dev->name, (int ) skb->len);netif_stop_queue (dev);
@@ -1106,13 +1106,13 @@*/ if (!send_packet (dev, skb)) {if (elp_debug >=2 ) { -printk ("%s: failed to transmit packet\n" , dev->name); +printk (KERN_DEBUG "%s: failed to transmit packet\n" , dev->name); }spin_unlock_irqrestore (&adapter->lock, flags);return 1 ; }if (elp_debug >=3 ) -printk ("%s: packet of length %d sent\n" , dev->name, (int ) skb->len); +printk (KERN_DEBUG "%s: packet of length %d sent\n" , dev->name, (int ) skb->len);/* * start the transmit timeout
@@ -1136,7 +1136,7 @@elp_device *adapter = (elp_device *) dev->priv;if (elp_debug >=3 ) -printk ("%s: request for stats\n" , dev->name); +printk (KERN_DEBUG "%s: request for stats\n" , dev->name);/* If the device is closed, just return the latest stats we have, - we cannot ask from the adapter without interrupts */
@@ -1148,7 +1148,7 @@ adapter->tx_pcb.length =0 ; adapter->got[CMD_NETWORK_STATISTICS ] =0 ;if (!send_pcb (dev, &adapter->tx_pcb)) -printk ("%s: couldn't send get statistics command\n" , dev->name); +printk (KERN_DEBUG "%s: couldn't send get statistics command\n" , dev->name);else {int timeout = jiffies +TIMEOUT ;while (adapter->got[CMD_NETWORK_STATISTICS ] ==0 &&time_before (jiffies, timeout));
@@ -1256,7 +1256,7 @@ adapter = dev->priv;if (elp_debug >=3 ) -printk ("%s: request to close device\n" , dev->name); +printk (KERN_DEBUG "%s: request to close device\n" , dev->name);netif_stop_queue (dev);
@@ -1300,7 +1300,7 @@unsigned long flags;if (elp_debug >=3 ) -printk ("%s: request to set multicast list\n" , dev->name); +printk (KERN_DEBUG "%s: request to set multicast list\n" , dev->name);spin_lock_irqsave (&adapter->lock, flags);
@@ -1315,7 +1315,7 @@ } adapter->got[CMD_LOAD_MULTICAST_LIST ] =0 ;if (!send_pcb (dev, &adapter->tx_pcb)) -printk ("%s: couldn't send set_multicast command\n" , dev->name); +printk (KERN_WARNING "%s: couldn't send set_multicast command\n" , dev->name);else {int timeout = jiffies +TIMEOUT ;while (adapter->got[CMD_LOAD_MULTICAST_LIST ] ==0 &&time_before (jiffies, timeout));
@@ -1334,14 +1334,14 @@* and wait for response */ if (elp_debug >=3 ) -printk ("%s: sending 82586 configure command\n" , dev->name); +printk (KERN_DEBUG "%s: sending 82586 configure command\n" , dev->name); adapter->tx_pcb.command =CMD_CONFIGURE_82586 ; adapter->tx_pcb.length =2 ; adapter->got[CMD_CONFIGURE_82586 ] =0 ;if (!send_pcb (dev, &adapter->tx_pcb)) {spin_unlock_irqrestore (&adapter->lock, flags); -printk ("%s: couldn't send 82586 configure command\n" , dev->name); +printk (KERN_ERR "%s: couldn't send 82586 configure command\n" , dev->name); }else {int timeout = jiffies +TIMEOUT ;
@@ -1408,11 +1408,11 @@ orig_HSR =inb_status (addr);if (elp_debug >0 ) -printk (search_msg, name, addr); + printk(KERN_DEBUG search_msg, name, addr);if (orig_HSR ==0xff ) {if (elp_debug >0 ) -printk (notfound_msg,1 ); + printk(KERN_DEBUG notfound_msg, 1); goto out; }/* Enable interrupts - we need timers! */
@@ -1421,7 +1421,7 @@/* Wait for a while; the adapter may still be booting up */ if (elp_debug >0 ) -printk (stilllooking_msg); + printk(KERN_INFO stilllooking_msg);if (orig_HSR &DIR ) {/* If HCR.DIR is up, we pull it down. HSR.DIR should follow. */
@@ -1431,7 +1431,7 @@restore_flags (flags);if (inb_status (addr) &DIR ) {if (elp_debug >0 ) -printk (notfound_msg,2 ); + printk(KERN_INFO notfound_msg, 2); goto out; } }else {
@@ -1442,7 +1442,7 @@restore_flags (flags);if (!(inb_status (addr) &DIR )) {if (elp_debug >0 ) -printk (notfound_msg,3 ); + printk(KERN_INFO notfound_msg, 3); goto out; } }
@@ -1450,7 +1450,7 @@* It certainly looks like a 3c505. */ if (elp_debug >0 ) -printk (found_msg); + printk(KERN_INFO found_msg);return 0 ; out:
@@ -1481,7 +1481,7 @@/* could not find an adapter */ if (elp_debug >0 ) -printk (couldnot_msg, dev->name); + printk(KERN_INFO couldnot_msg, dev->name);return 0 ;/* Because of this, the layer above will return -ENODEV */ }
@@ -1529,7 +1529,7 @@*/ adapter = (elp_device *) (dev->priv =kmalloc (sizeof (elp_device),GFP_KERNEL ));if (adapter ==NULL ) { -printk ("%s: out of memory\n" , dev->name); +printk (KERN_ERR "%s: out of memory\n" , dev->name);return -ENODEV ; }
@@ -1554,7 +1554,7 @@/* Nope, it's ignoring the command register. This means that * either it's still booting up, or it's died. */ -printk ("%s: command register wouldn't drain, " , dev->name); +printk (KERN_WARNING "%s: command register wouldn't drain, " , dev->name);if ((inb_status (dev->base_addr) &7 ) ==3 ) {/* If the adapter status is 3, it *could* still be booting. * Give it the benefit of the doubt for 10 seconds.
@@ -1563,7 +1563,7 @@ timeout = jiffies +10 *HZ ;while (time_before (jiffies, timeout) && (inb_status (dev->base_addr) &7 ));if (inb_status (dev->base_addr) &7 ) { -printk ("%s: 3c505 failed to start\n" , dev->name); +printk (KERN_ERR "%s: 3c505 failed to start\n" , dev->name); }else { okay =1 ;/* It started */ }
@@ -1584,18 +1584,18 @@ adapter->tx_pcb.length =0 ; cookie =probe_irq_on ();if (!send_pcb (dev, &adapter->tx_pcb)) { -printk ("%s: could not send first PCB\n" , dev->name); +printk (KERN_ERR "%s: could not send first PCB\n" , dev->name);probe_irq_off (cookie);continue ; }if (!receive_pcb (dev, &adapter->rx_pcb)) { -printk ("%s: could not read first PCB\n" , dev->name); +printk (KERN_ERR "%s: could not read first PCB\n" , dev->name);probe_irq_off (cookie);continue ; }if ((adapter->rx_pcb.command !=CMD_ADDRESS_RESPONSE ) || (adapter->rx_pcb.length !=6 )) { -printk ("%s: first PCB wrong (%d, %d)\n" , dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length); +printk (KERN_ERR "%s: first PCB wrong (%d, %d)\n" , dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);probe_irq_off (cookie);continue ; }
@@ -1608,29 +1608,29 @@outb_control (adapter->hcr_val |FLSH |ATTN , dev);outb_control (adapter->hcr_val & ~(FLSH |ATTN ), dev); } -printk ("%s: failed to initialise 3c505\n" , dev->name); +printk (KERN_ERR "%s: failed to initialise 3c505\n" , dev->name);release_region (dev->base_addr,ELP_IO_EXTENT );return -ENODEV ; - okay: +okay:if (dev->irq) {/* Is there a preset IRQ? */ int rpt =probe_irq_off (cookie);if (dev->irq != rpt) { -printk ("%s: warning, irq %d configured but %d detected\n" , dev->name, dev->irq, rpt); +printk (KERN_WARNING "%s: warning, irq %d configured but %d detected\n" , dev->name, dev->irq, rpt); }/* if dev->irq == probe_irq_off(cookie), all is well */ }else /* No preset IRQ; just use what we can detect */ dev->irq =probe_irq_off (cookie);switch (dev->irq) {/* Legal, sane? */ case 0 : -printk ("%s: IRQ probe failed: check 3c505 jumpers.\n" , +printk (KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n" , dev->name);return -ENODEV ;case 1 :case 6 :case 8 :case 13 : -printk ("%s: Impossible IRQ %d reported by probe_irq_off().\n" , +printk (KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n" , dev->name, dev->irq);return -ENODEV ; }
@@ -1660,7 +1660,7 @@/* * print remainder of startup message */ -printk ("%s: 3c505 at %#lx, irq %d, dma %d, " , +printk ("KERN_INFO %s: 3c505 at %#lx, irq %d, dma %d, " , dev->name, dev->base_addr, dev->irq, dev->dma); printk("addr %02x:%02x:%02x:%02x:%02x:%02x, ", dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
@@ -1676,7 +1676,7 @@ !receive_pcb(dev, &adapter->rx_pcb) || (adapter->rx_pcb.command != CMD_ADAPTER_INFO_RESPONSE) || (adapter->rx_pcb.length != 10)) { -printk ("not responding to second PCB\n" ); +printk (KERN_WARNING "not responding to second PCB\n" ); }printk ("rev %d.%d, %dk\n" , adapter->rx_pcb.data.info.major_vers, adapter->rx_pcb.data.info.minor_vers, adapter->rx_pcb.data.info.RAM_sz);
@@ -1695,10 +1695,10 @@ !receive_pcb(dev, &adapter->rx_pcb) || (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) || (adapter->rx_pcb.length != 2)) { -printk ("%s: could not configure adapter memory\n" , dev->name); +printk (KERN_WARNING "%s: could not configure adapter memory\n" , dev->name); }if (adapter->rx_pcb.data.configure) { -printk ("%s: adapter configuration failed\n" , dev->name); +printk (KERN_ERR "%s: adapter configuration failed\n" , dev->name); }/*